Messages in this thread | | | From | Mathieu Olivari <> | Subject | [PATCH v3 0/3] qcom: Add SMEM MTD parser | Date | Mon, 17 Aug 2015 16:47:43 -0700 |
| |
QCOM platforms such as IPQ806x are using SMEM to store their flash layout. This patch set adds the DT nodes required to instanciate SMEM on IPQ806x and add an MTD parser using it.
This change is based on the SMEM driver posted here: *https://lkml.org/lkml/2015/7/27/1125
v2: *Release the SPI device reference after looking it up (put_device()) *Represent SMEM data as __le32 rather than u32 *Move new DT nodes in their proper respective location *Address readability concerns in MTD parser
v3: *Address Bjorn's comments
Mathieu Olivari (3): ARM: qcom: add SFPB nodes to IPQ806x dts ARM: qcom: add SMEM device node to IPQ806x dts mtd: add SMEM parser for QCOM platforms
arch/arm/boot/dts/qcom-ipq8064.dtsi | 23 +++- drivers/mtd/Kconfig | 7 ++ drivers/mtd/Makefile | 1 + drivers/mtd/qcom_smem_part.c | 224 ++++++++++++++++++++++++++++++++++++ 4 files changed, 254 insertions(+), 1 deletion(-) create mode 100644 drivers/mtd/qcom_smem_part.c
-- 2.1.4
| |