lkml.org 
[lkml]   [2015]   [Jul]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v3 0/3] net: dsa: mv88e6xxx: add support for VLAN Table Unit
On Mon, Jul 6, 2015 at 7:00 PM, Andrew Lunn <andrew@lunn.ch> wrote:
> On Tue, Jul 07, 2015 at 01:38:04AM +0200, Andrew Lunn wrote:
>> On Sun, Jul 05, 2015 at 10:14:50PM -0400, Vivien Didelot wrote:
>> > Hi all,
>> >
>> > This patchset brings full support for hardware VLANs in DSA, and the Marvell
>> > 88E6xxx compatible switch chips.
>>
>> Hi Vivien
>>
>> I just booted these patches on my board, and i'm getting WARNINGS:
>>
>> [ 61.111302] WARNING: CPU: 0 PID: 2751 at net/switchdev/switchdev.c:265 switchdev_port_obj_add+0xd4/0xdc()
>
> Hi Vivien
>
> I debugged this a bit.
>
> The problem comes from:
>
> static int dsa_slave_port_obj_add(struct net_device *dev,
> struct switchdev_obj *obj)
> {
> int err;
>
> /*
> * Skip the prepare phase, since currently the DSA drivers don't need to
> * allocate any memory for operations and they will not fail to HW
> * (unless something horrible goes wrong on the MDIO bus, in which case
> * the prepare phase wouldn't have been able to predict anyway).
> */
> if (obj->trans != SWITCHDEV_TRANS_COMMIT)
> return 0;
>
> switch (obj->id) {
> case SWITCHDEV_OBJ_PORT_VLAN:
> err = dsa_slave_port_vlans_add(dev, obj);
> break;
> default:
> err = -EOPNOTSUPP;
> break;
> }
>
> return err;
> }
>
> It is being called with obj->id of 2, which is
> SWITCHDEV_OBJ_IPV4_FIB. This function is called twice. The first time
> it is with SWITCHDEV_TRANS_PREPARE and we are allowed to return an
> error. The second time, with SWITCHDEV_TRANS_COMMIT, errors are not
> allowed.
>
> EOPNOTSUPP is considered an error, so since we don't support
> SWITCHDEV_OBJ_IPV4_FIB we error out the COMMIT phase.
>
> Not sure which is cleaner. Test to see if we support the object during
> the prepare, or allow the commit to accept EOPNOTSUPP as not being an
> error?

I think we should return EOPNOTSUPP on PREPARE, so move the trans !=
COMMIT test inside the case for PORT_VLAN. That would future-proof
the func when new objects are added to switchdev (and not supported by
dsa_slave).

Does that sound OK?

-scott


\
 
 \ /
  Last update: 2015-07-07 06:01    [W:0.055 / U:0.752 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site