lkml.org 
[lkml]   [2015]   [Jul]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 0/3] net: dsa: mv88e6xxx: add support for VLAN Table Unit
On Tue, Jul 07, 2015 at 01:38:04AM +0200, Andrew Lunn wrote:
> On Sun, Jul 05, 2015 at 10:14:50PM -0400, Vivien Didelot wrote:
> > Hi all,
> >
> > This patchset brings full support for hardware VLANs in DSA, and the Marvell
> > 88E6xxx compatible switch chips.
>
> Hi Vivien
>
> I just booted these patches on my board, and i'm getting WARNINGS:
>
> [ 61.111302] WARNING: CPU: 0 PID: 2751 at net/switchdev/switchdev.c:265 switchdev_port_obj_add+0xd4/0xdc()

Hi Vivien

I debugged this a bit.

The problem comes from:

static int dsa_slave_port_obj_add(struct net_device *dev,
struct switchdev_obj *obj)
{
int err;

/*
* Skip the prepare phase, since currently the DSA drivers don't need to
* allocate any memory for operations and they will not fail to HW
* (unless something horrible goes wrong on the MDIO bus, in which case
* the prepare phase wouldn't have been able to predict anyway).
*/
if (obj->trans != SWITCHDEV_TRANS_COMMIT)
return 0;

switch (obj->id) {
case SWITCHDEV_OBJ_PORT_VLAN:
err = dsa_slave_port_vlans_add(dev, obj);
break;
default:
err = -EOPNOTSUPP;
break;
}

return err;
}

It is being called with obj->id of 2, which is
SWITCHDEV_OBJ_IPV4_FIB. This function is called twice. The first time
it is with SWITCHDEV_TRANS_PREPARE and we are allowed to return an
error. The second time, with SWITCHDEV_TRANS_COMMIT, errors are not
allowed.

EOPNOTSUPP is considered an error, so since we don't support
SWITCHDEV_OBJ_IPV4_FIB we error out the COMMIT phase.

Not sure which is cleaner. Test to see if we support the object during
the prepare, or allow the commit to accept EOPNOTSUPP as not being an
error?

Andrew


\
 
 \ /
  Last update: 2015-07-07 04:21    [W:0.084 / U:0.556 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site