lkml.org 
[lkml]   [2015]   [Jul]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/4] Add Broadcom North Star 2 support
Date
This patch series adds Broadcom North Star 2 (NS2) SoC support. NS2 is an ARMv8
based SoC and under the Broadcom iProc family.

Sorry for tying this with the Broadcom iProc PCIe driver fixes for ARM64. I
have to tie them together because iProc PCIe support is enabled by default
when ARCH_BCM_IPROC is enabled. Without the fixes in the iProc PCIe driver,
enabling CONFIG_ARCH_BCM_IPROC would break the build for arm64 defconfig. Let
me know if there's a better way to handle this.

This patch series is generated based on v4.2-rc2 and tested on Broadcom NS2 SVK

Ray Jui (4):
PCI: iproc: enable arm64 support for iProc PCIe
PCI: iproc: Fix ARM64 dependency in Kconfig
arm64: Add Broadcom's North Star 2 support
arm64: dts: Add Broadcom North Star 2 support

Documentation/devicetree/bindings/arm/bcm/ns2.txt | 9 ++
arch/arm64/Kconfig | 12 +++
arch/arm64/boot/dts/Makefile | 1 +
arch/arm64/boot/dts/broadcom/Makefile | 5 ++
arch/arm64/boot/dts/broadcom/ns2-svk.dts | 55 ++++++++++++
arch/arm64/boot/dts/broadcom/ns2.dtsi | 95 +++++++++++++++++++++
arch/arm64/configs/defconfig | 2 +
drivers/pci/host/Kconfig | 2 +-
drivers/pci/host/pcie-iproc.c | 12 +++
drivers/pci/host/pcie-iproc.h | 2 +
10 files changed, 194 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/arm/bcm/ns2.txt
create mode 100644 arch/arm64/boot/dts/broadcom/Makefile
create mode 100644 arch/arm64/boot/dts/broadcom/ns2-svk.dts
create mode 100644 arch/arm64/boot/dts/broadcom/ns2.dtsi

--
1.7.9.5



\
 
 \ /
  Last update: 2015-07-14 04:01    [W:0.064 / U:1.284 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site