lkml.org 
[lkml]   [2015]   [Jun]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] GICv3: Add ITS entry to THUNDER dts
Date
From: Tirumalesh Chalamarla <tchalamarla@cavium.com>

The PCIe host controller uses MSIs provided by GICv3 ITS. Enable it on
Thunder SoCs by adding an entry to DT.

Signed-off-by: Tirumalesh Chalamarla <tchalamarla@cavium.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
---
arch/arm64/boot/dts/cavium/thunder-88xx.dtsi | 9 +++++++++
1 file changed, 9 insertions(+)

diff --git a/arch/arm64/boot/dts/cavium/thunder-88xx.dtsi b/arch/arm64/boot/dts/cavium/thunder-88xx.dtsi
index d8c0bdc..9cb7cf9 100644
--- a/arch/arm64/boot/dts/cavium/thunder-88xx.dtsi
+++ b/arch/arm64/boot/dts/cavium/thunder-88xx.dtsi
@@ -376,10 +376,19 @@
gic0: interrupt-controller@8010,00000000 {
compatible = "arm,gic-v3";
#interrupt-cells = <3>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
interrupt-controller;
reg = <0x8010 0x00000000 0x0 0x010000>, /* GICD */
<0x8010 0x80000000 0x0 0x600000>; /* GICR */
interrupts = <1 9 0xf04>;
+
+ its: gic-its@8010,00020000 {
+ compatible = "arm,gic-v3-its";
+ msi-controller;
+ reg = <0x8010 0x20000 0x0 0x200000>;
+ };
};

uaa0: serial@87e0,24000000 {
--
2.1.0


\
 
 \ /
  Last update: 2015-06-26 21:21    [W:0.248 / U:0.872 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site