lkml.org 
[lkml]   [2015]   [Jun]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 8/9] arm: twr-k70f120m: extend Freescale eDMA driver with ability to support Kinetis SoC
On Tue, Jun 23, 2015 at 11:19:46PM +0200, Paul Osmialowski wrote:
> Surprisingly small amount of work was required in order to extend already
> existing eDMA driver with the support for Kinetis SoC architecture.
>
> Note that <mach/memory.h> is needed (which is denoted by
> CONFIG_NEED_MACH_MEMORY_H) as it provides macros required for proper
> operation of DMA allocation functions.
>
> Signed-off-by: Paul Osmialowski <pawelo@king.net.pl>
> ---
> Documentation/devicetree/bindings/dma/fsl-edma.txt | 38 +++++++++-
> arch/arm/Kconfig | 4 ++
> arch/arm/boot/dts/kinetis.dtsi | 34 +++++++++
> arch/arm/mach-kinetis/include/mach/memory.h | 61 ++++++++++++++++
> drivers/clk/clk-kinetis.c | 15 ++++
> drivers/dma/fsl-edma.c | 81 +++++++++++++++++++++-
> include/dt-bindings/clock/kinetis-mcg.h | 5 +-
having so many change into one patch is not a great idea, please breka them
up. I am looking for single/multiple patches which only touch dmaengine
files


> +#ifdef CONFIG_ARCH_KINETIS
> +static const char * const txirq_names[] = {
> + "edma-tx-0,16",
> + "edma-tx-1,17",
> + "edma-tx-2,18",
> + "edma-tx-3,19",
> + "edma-tx-4,20",
> + "edma-tx-5,21",
> + "edma-tx-6,22",
> + "edma-tx-7,23",
> + "edma-tx-8,24",
> + "edma-tx-9,25",
> + "edma-tx-10,26",
> + "edma-tx-11,27",
> + "edma-tx-12,28",
> + "edma-tx-13,29",
> + "edma-tx-14,30",
> + "edma-tx-15,31",
> +};
why do we need this array, these seem to come from DT, right?
> +#endif
> +
> struct fsl_edma_engine {
> struct dma_device dma_dev;
> void __iomem *membase;
> +#ifdef CONFIG_ARCH_KINETIS
> + struct clk *clk;
> +#endif
> void __iomem *muxbase[DMAMUX_NR];
> struct clk *muxclk[DMAMUX_NR];
> struct mutex fsl_edma_mutex;
> u32 n_chans;
> +#ifdef CONFIG_ARCH_KINETIS
> + int txirq[ARRAY_SIZE(txirq_names)];
> +#else
> int txirq;
> +#endif
> int errirq;
> bool big_endian;
> struct fsl_edma_chan chans[];
we can define these bits and only be used on kinetis machines?

> @@ -709,6 +737,7 @@ static irqreturn_t fsl_edma_err_handler(int irq, void *dev_id)
> return IRQ_HANDLED;
> }
>
> +#ifndef CONFIG_ARCH_KINETIS
> static irqreturn_t fsl_edma_irq_handler(int irq, void *dev_id)
> {
> if (fsl_edma_tx_handler(irq, dev_id) == IRQ_HANDLED)
> @@ -716,6 +745,7 @@ static irqreturn_t fsl_edma_irq_handler(int irq, void *dev_id)
>
> return fsl_edma_err_handler(irq, dev_id);
> }
> +#endif
>
> static void fsl_edma_issue_pending(struct dma_chan *chan)
> {
> @@ -788,15 +818,29 @@ static void fsl_edma_free_chan_resources(struct dma_chan *chan)
> }
>
> static int
> -fsl_edma_irq_init(struct platform_device *pdev, struct fsl_edma_engine *fsl_edma)
> +fsl_edma_irq_init(struct platform_device *pdev,
> + struct fsl_edma_engine *fsl_edma)
> {
> int ret;
> +#ifdef CONFIG_ARCH_KINETIS
> + int i;
>
> + for (i = 0; i < ARRAY_SIZE(txirq_names); i++) {
> + fsl_edma->txirq[i] = platform_get_irq_byname(pdev,
> + txirq_names[i]);
> + if (fsl_edma->txirq[i] < 0) {
> + dev_err(&pdev->dev, "Can't get %s irq.\n",
> + txirq_names[i]);
> + return fsl_edma->txirq[i];
> + }
> + }
> +#else
> fsl_edma->txirq = platform_get_irq_byname(pdev, "edma-tx");
> if (fsl_edma->txirq < 0) {
> dev_err(&pdev->dev, "Can't get edma-tx irq.\n");
> return fsl_edma->txirq;
> }
> +#endif
can you have two routines and with one of them onvoked based on machine type
which should be configured based on DT data rather

>
> fsl_edma->errirq = platform_get_irq_byname(pdev, "edma-err");
> if (fsl_edma->errirq < 0) {
> @@ -804,6 +848,16 @@ fsl_edma_irq_init(struct platform_device *pdev, struct fsl_edma_engine *fsl_edma
> return fsl_edma->errirq;
> }
>
> +#ifdef CONFIG_ARCH_KINETIS
> + for (i = 0; i < ARRAY_SIZE(txirq_names); i++) {
> + ret = devm_request_irq(&pdev->dev, fsl_edma->txirq[i],
> + fsl_edma_tx_handler, 0, txirq_names[i], fsl_edma);
> + if (ret) {
> + dev_err(&pdev->dev, "Can't register eDMA tx IRQ.\n");
> + return ret;
> + }
> + }
> +#else
> if (fsl_edma->txirq == fsl_edma->errirq) {
> ret = devm_request_irq(&pdev->dev, fsl_edma->txirq,
> fsl_edma_irq_handler, 0, "eDMA", fsl_edma);
> @@ -818,6 +872,7 @@ fsl_edma_irq_init(struct platform_device *pdev, struct fsl_edma_engine *fsl_edma
> dev_err(&pdev->dev, "Can't register eDMA tx IRQ.\n");
> return ret;
> }
> +#endif
only one of them will be populated so if-else should work too

please get rid of these ifdef stuff and make it based on DT data based flags

--
~Vinod


\
 
 \ /
  Last update: 2015-06-24 18:41    [W:0.308 / U:0.912 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site