lkml.org 
[lkml]   [2015]   [Jun]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5/9] arm: twr-k70f120m: basic support for Kinetis TWR-K70F120M
Date
This one is inspired a serie by commits published on Emcraft git repo:

https://github.com/EmcraftSystems/linux-emcraft.git

Entry commit: f014da1df860ad702d923c95cb97e068bd302cb0
RT75957. twr-k70f120m: basic support

by: Alexander Potashev <aspotashev@emcraft.com>

Signed-off-by: Paul Osmialowski <pawelo@king.net.pl>
---
Documentation/devicetree/bindings/arm/fsl.txt | 6 +
arch/arm/Kconfig | 14 ++-
arch/arm/Kconfig-nommu | 1 +
arch/arm/Makefile | 1 +
arch/arm/boot/dts/kinetis-twr-k70f120m.dts | 16 +++
arch/arm/boot/dts/kinetis.dtsi | 5 +
arch/arm/mach-kinetis/Kconfig | 9 ++
arch/arm/mach-kinetis/Makefile | 5 +
arch/arm/mach-kinetis/Makefile.boot | 3 +
arch/arm/mach-kinetis/include/mach/idle.h | 33 +++++
arch/arm/mach-kinetis/include/mach/kinetis.h | 170 ++++++++++++++++++++++++++
arch/arm/mach-kinetis/kinetis_platform.c | 61 +++++++++
arch/arm/mm/Kconfig | 1 +
arch/arm/tools/mach-types | 1 +
14 files changed, 325 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/boot/dts/kinetis-twr-k70f120m.dts
create mode 100644 arch/arm/boot/dts/kinetis.dtsi
create mode 100644 arch/arm/mach-kinetis/Kconfig
create mode 100644 arch/arm/mach-kinetis/Makefile
create mode 100644 arch/arm/mach-kinetis/Makefile.boot
create mode 100644 arch/arm/mach-kinetis/include/mach/idle.h
create mode 100644 arch/arm/mach-kinetis/include/mach/kinetis.h
create mode 100644 arch/arm/mach-kinetis/kinetis_platform.c

diff --git a/Documentation/devicetree/bindings/arm/fsl.txt b/Documentation/devicetree/bindings/arm/fsl.txt
index 2a3ba73..36179fd 100644
--- a/Documentation/devicetree/bindings/arm/fsl.txt
+++ b/Documentation/devicetree/bindings/arm/fsl.txt
@@ -135,3 +135,9 @@ LS2085A ARMv8 based Simulator model
Required root node properties:
- compatible = "fsl,ls2085a-simu", "fsl,ls2085a";

+Freescale Kinetis SoC Device Tree Bindings
+------------------------------------------
+
+TWR-K70F120M Kinetis K70 based development board.
+Required root node compatible properties:
+ - compatible = "fsl,kinetis-twr-k70f120m"
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 8ef8f8f..747cdea 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -877,6 +877,8 @@ source "arch/arm/mach-ixp4xx/Kconfig"

source "arch/arm/mach-keystone/Kconfig"

+source "arch/arm/mach-kinetis/Kconfig"
+
source "arch/arm/mach-ks8695/Kconfig"

source "arch/arm/mach-meson/Kconfig"
@@ -971,6 +973,16 @@ config ARCH_EFM32
Support for Energy Micro's (now Silicon Labs) efm32 Giant Gecko
processors.

+config ARCH_KINETIS
+ bool "Freescale Kinetis MCU"
+ depends on ARM_SINGLE_ARMV7M
+ select CPU_CORTEXM3
+ select ARM_CPU_IDLE_QUIRKS
+ select ARMV7M_SYSTICK
+ select ZLIB_INFLATE_STACK_SAVING if ZLIB_INFLATE
+ help
+ This enables support for the Freescale Kinetis MCUs
+
config ARCH_LPC18XX
bool "NXP LPC18xx/LPC43xx"
depends on ARM_SINGLE_ARMV7M
@@ -1740,7 +1752,7 @@ source "mm/Kconfig"
config FORCE_MAX_ZONEORDER
int "Maximum zone order" if ARCH_SHMOBILE_LEGACY
range 11 64 if ARCH_SHMOBILE_LEGACY
- default "12" if SOC_AM33XX
+ default "12" if SOC_AM33XX || ARCH_KINETIS
default "9" if SA1111 || ARCH_EFM32
default "11"
help
diff --git a/arch/arm/Kconfig-nommu b/arch/arm/Kconfig-nommu
index 98220e8..2b08e7a 100644
--- a/arch/arm/Kconfig-nommu
+++ b/arch/arm/Kconfig-nommu
@@ -69,6 +69,7 @@ config ZLIB_INFLATE_STACK_SAVING

config COPY_VECTOR_TABLE_TO_SRAM_ADDR
hex 'If non-zero, copy Vector Table to this SRAM Address' if CPU_V7M
+ default 0x20000000 if ARCH_KINETIS
default 0x00000000
depends on CPU_V7M
help
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index a7e1007..761db56 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -171,6 +171,7 @@ machine-$(CONFIG_ARCH_IOP32X) += iop32x
machine-$(CONFIG_ARCH_IOP33X) += iop33x
machine-$(CONFIG_ARCH_IXP4XX) += ixp4xx
machine-$(CONFIG_ARCH_KEYSTONE) += keystone
+machine-$(CONFIG_ARCH_KINETIS) += kinetis
machine-$(CONFIG_ARCH_KS8695) += ks8695
machine-$(CONFIG_ARCH_LPC18XX) += lpc18xx
machine-$(CONFIG_ARCH_LPC32XX) += lpc32xx
diff --git a/arch/arm/boot/dts/kinetis-twr-k70f120m.dts b/arch/arm/boot/dts/kinetis-twr-k70f120m.dts
new file mode 100644
index 0000000..edccf37
--- /dev/null
+++ b/arch/arm/boot/dts/kinetis-twr-k70f120m.dts
@@ -0,0 +1,16 @@
+/*
+ * Device tree for TWR-K70F120M development board.
+ *
+ */
+
+/dts-v1/;
+#include "kinetis.dtsi"
+
+/ {
+ model = "Freescale TWR-K70F120M Development Kit";
+ compatible = "fsl,kinetis-twr-k70f120m";
+
+ memory {
+ reg = <0x8000000 0x8000000>;
+ };
+};
diff --git a/arch/arm/boot/dts/kinetis.dtsi b/arch/arm/boot/dts/kinetis.dtsi
new file mode 100644
index 0000000..93d2a8a
--- /dev/null
+++ b/arch/arm/boot/dts/kinetis.dtsi
@@ -0,0 +1,5 @@
+/*
+ * Device tree for Freescale Kinetis SoC.
+ *
+ */
+#include "armv7-m.dtsi"
diff --git a/arch/arm/mach-kinetis/Kconfig b/arch/arm/mach-kinetis/Kconfig
new file mode 100644
index 0000000..300bcea
--- /dev/null
+++ b/arch/arm/mach-kinetis/Kconfig
@@ -0,0 +1,9 @@
+if ARCH_KINETIS
+
+config MACH_KINETIS
+ bool "Kinetis K70 based development board"
+ default y
+ help
+ Say Y here if you are using Kinetis K70 based development board
+
+endif
diff --git a/arch/arm/mach-kinetis/Makefile b/arch/arm/mach-kinetis/Makefile
new file mode 100644
index 0000000..3746b3d
--- /dev/null
+++ b/arch/arm/mach-kinetis/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the Freescale Kinetis platform files
+#
+
+obj-$(CONFIG_MACH_KINETIS) += kinetis_platform.o
diff --git a/arch/arm/mach-kinetis/Makefile.boot b/arch/arm/mach-kinetis/Makefile.boot
new file mode 100644
index 0000000..3b442ab
--- /dev/null
+++ b/arch/arm/mach-kinetis/Makefile.boot
@@ -0,0 +1,3 @@
+ zreladdr-y := 0x08008000
+params_phys-y := 0x08000100
+initrd_phys-y := 0x08100000
diff --git a/arch/arm/mach-kinetis/include/mach/idle.h b/arch/arm/mach-kinetis/include/mach/idle.h
new file mode 100644
index 0000000..0aafefd
--- /dev/null
+++ b/arch/arm/mach-kinetis/include/mach/idle.h
@@ -0,0 +1,33 @@
+/*
+ * Based on original code by Vladimir Khusainov <vlad@emcraft.com>
+ *
+ * (C) Copyright 2011, 2012
+ * Emcraft Systems, <www.emcraft.com>
+ * Vladimir Khusainov <vlad@emcraft.com>
+ *
+ * Copyright (C) 2015 Paul Osmialowski <pawelo@king.net.pl>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+
+#ifndef _MACH_KINETIS_IDLE_H
+#define _MACH_KINETIS_IDLE_H
+
+#ifndef __ASSEMBLY__
+
+#include <linux/io.h>
+
+static inline void handle_cpu_idle_quirks(void)
+{
+ /*
+ * This is a dirty hack that invalidates the I/D bus cache
+ * on Kinetis K70. This must be done after arch idle.
+ */
+ writel(readl(IOMEM(0xe0082000)) | 0x85000000, IOMEM(0xe0082000));
+}
+
+#endif /* __ASSEMBLY__ */
+
+#endif /*_MACH_KINETIS_IDLE_H */
diff --git a/arch/arm/mach-kinetis/include/mach/kinetis.h b/arch/arm/mach-kinetis/include/mach/kinetis.h
new file mode 100644
index 0000000..54d0a8b
--- /dev/null
+++ b/arch/arm/mach-kinetis/include/mach/kinetis.h
@@ -0,0 +1,170 @@
+/*
+ * (C) Copyright 2012
+ * Emcraft Systems, <www.emcraft.com>
+ * Alexander Potashev <aspotashev@emcraft.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+
+#ifndef _MACH_KINETIS_KINETIS_H
+#define _MACH_KINETIS_KINETIS_H
+
+#include <asm/byteorder.h>
+
+/*
+ * This Kinetis port assumes that the CPU works in little-endian mode.
+ * Switching to big-endian will require different bit offsets in peripheral
+ * devices' registers. Also, some bit groups may lay on byte edges, so issue
+ * with big-endian cannot be fixed only by defining bit offsets differently
+ * for the big-endian mode.
+ */
+#ifndef __LITTLE_ENDIAN
+#error This Kinetis port assumes that the CPU works in little-endian mode
+#endif
+
+/*
+ * Peripheral memory map
+ */
+#define KINETIS_AIPS0PERIPH_BASE 0x40000000
+#define KINETIS_AIPS1PERIPH_BASE 0x40080000
+
+#ifndef __ASSEMBLY__
+
+#include <asm/types.h>
+
+/*
+ * Limits for the `kinetis_periph_enable()` function:
+ * 1. The number of SIM_SCGC[] registers
+ * 2. The number of bits in those registers
+ */
+#define KINETIS_SIM_CG_NUMREGS 7
+#define KINETIS_SIM_CG_NUMBITS 32
+
+/*
+ * System Integration Module (SIM) register map
+ *
+ * This map actually covers two hardware modules:
+ * 1. SIM low-power logic, at 0x40047000
+ * 2. System integration module (SIM), at 0x40048000
+ */
+struct kinetis_sim_regs {
+ u32 sopt1; /* System Options Register 1 */
+ u32 rsv0[1024];
+ u32 sopt2; /* System Options Register 2 */
+ u32 rsv1;
+ u32 sopt4; /* System Options Register 4 */
+ u32 sopt5; /* System Options Register 5 */
+ u32 sopt6; /* System Options Register 6 */
+ u32 sopt7; /* System Options Register 7 */
+ u32 rsv2[2];
+ u32 sdid; /* System Device Identification Register */
+ u32 scgc[KINETIS_SIM_CG_NUMREGS]; /* Clock Gating Regs 1...7 */
+ u32 clkdiv1; /* System Clock Divider Register 1 */
+ u32 clkdiv2; /* System Clock Divider Register 2 */
+ u32 fcfg1; /* Flash Configuration Register 1 */
+ u32 fcfg2; /* Flash Configuration Register 2 */
+ u32 uidh; /* Unique Identification Register High */
+ u32 uidmh; /* Unique Identification Register Mid-High */
+ u32 uidml; /* Unique Identification Register Mid Low */
+ u32 uidl; /* Unique Identification Register Low */
+ u32 clkdiv3; /* System Clock Divider Register 3 */
+ u32 clkdiv4; /* System Clock Divider Register 4 */
+ u32 mcr; /* Misc Control Register */
+};
+
+/*
+ * SIM registers base
+ */
+#define KINETIS_SIM_BASE (KINETIS_AIPS0PERIPH_BASE + 0x00047000)
+#define KINETIS_SIM_PTR(reg) \
+ (&(((struct kinetis_sim_regs *)(KINETIS_SIM_BASE))->reg))
+#define KINETIS_SIM_RD(reg) readl_relaxed(KINETIS_SIM_PTR(reg))
+#define KINETIS_SIM_WR(reg, val) writel_relaxed((val), KINETIS_SIM_PTR(reg))
+#define KINETIS_SIM_SET(reg, mask) \
+ KINETIS_SIM_WR(reg, (KINETIS_SIM_RD(reg)) | (mask))
+#define KINETIS_SIM_RESET(reg, mask) \
+ KINETIS_SIM_WR(reg, (KINETIS_SIM_RD(reg)) & (~(mask)))
+#define KINETIS_SIM_ISSET(reg, mask) \
+ (KINETIS_SIM_RD(reg) & (mask))
+
+/*
+ * SIM registers
+ */
+/*
+ * System Options Register 2
+ */
+/* USB HS clock source select */
+#define KINETIS_SIM_SOPT2_USBHSRC_BITS 2
+#define KINETIS_SIM_SOPT2_USBHSRC_MSK (3 << KINETIS_SIM_SOPT2_USBHSRC_BITS)
+#define KINETIS_SIM_SOPT2_USBHSRC_PLL0 (1 << KINETIS_SIM_SOPT2_USBHSRC_BITS)
+#define KINETIS_SIM_SOPT2_USBHSRC_PLL1 (2 << KINETIS_SIM_SOPT2_USBHSRC_BITS)
+
+/* USB FS clock source select */
+#define KINETIS_SIM_SOPT2_USBFSRC_BITS 22
+#define KINETIS_SIM_SOPT2_USBFSRC_MSK (3 << KINETIS_SIM_SOPT2_USBFSRC_BITS)
+#define KINETIS_SIM_SOPT2_USBFSRC_PLL0 (1 << KINETIS_SIM_SOPT2_USBFSRC_BITS)
+#define KINETIS_SIM_SOPT2_USBFSRC_PLL1 (2 << KINETIS_SIM_SOPT2_USBFSRC_BITS)
+#define KINETIS_SIM_SOPT2_USBF_CLKSEL (1 << 18)
+
+/*
+ * System Clock Divider Register 1
+ */
+/* Clock 1 output divider value (for the core/system clock) */
+#define KINETIS_SIM_CLKDIV1_OUTDIV1_BITS 28
+#define KINETIS_SIM_CLKDIV1_OUTDIV1_MSK \
+ (((1 << 4) - 1) << KINETIS_SIM_CLKDIV1_OUTDIV1_BITS)
+/* Clock 2 output divider value (for the peripheral clock) */
+#define KINETIS_SIM_CLKDIV1_OUTDIV2_BITS 24
+#define KINETIS_SIM_CLKDIV1_OUTDIV2_MSK \
+ (((1 << 4) - 1) << KINETIS_SIM_CLKDIV1_OUTDIV2_BITS)
+
+/*
+ * System Clock Divider Register 2
+ */
+/* USB HS clock divider fraction */
+#define KINETIS_SIM_CLKDIV2_USBHSFRAC_BIT 8
+#define KINETIS_SIM_CLKDIV2_USBHSFRAC_MSK \
+ (1 << KINETIS_SIM_CLKDIV2_USBHSFRAC_BIT)
+/* USB HS clock divider divisor */
+#define KINETIS_SIM_CLKDIV2_USBHSDIV_BIT 9
+#define KINETIS_SIM_CLKDIV2_USBHSDIV_MSK \
+ (7 << KINETIS_SIM_CLKDIV2_USBHSDIV_BIT)
+
+/* USB FS clock divider fraction */
+#define KINETIS_SIM_CLKDIV2_USBFSFRAC_BIT 0
+#define KINETIS_SIM_CLKDIV2_USBFSFRAC_MSK \
+ (1 << KINETIS_SIM_CLKDIV2_USBFSFRAC_BIT)
+/* USB FS clock divider divisor */
+#define KINETIS_SIM_CLKDIV2_USBFSDIV_BIT 1
+#define KINETIS_SIM_CLKDIV2_USBFSDIV_MSK \
+ (7 << KINETIS_SIM_CLKDIV2_USBFSDIV_BIT)
+
+/*
+ * System Clock Divider Register 3
+ */
+/* LCD Controller clock divider divisor */
+#define KINETIS_SIM_CLKDIV3_LCDCDIV_BITS 16
+#define KINETIS_SIM_CLKDIV3_LCDCDIV_BITWIDTH 12
+#define KINETIS_SIM_CLKDIV3_LCDCDIV_MSK \
+ (((1 << KINETIS_SIM_CLKDIV3_LCDCDIV_BITWIDTH) - 1) << \
+ KINETIS_SIM_CLKDIV3_LCDCDIV_BITS)
+/* LCD Controller clock divider fraction */
+#define KINETIS_SIM_CLKDIV3_LCDCFRAC_BITS 8
+#define KINETIS_SIM_CLKDIV3_LCDCFRAC_BITWIDTH 8
+#define KINETIS_SIM_CLKDIV3_LCDCFRAC_MSK \
+ (((1 << KINETIS_SIM_CLKDIV3_LCDCFRAC_BITWIDTH) - 1) << \
+ KINETIS_SIM_CLKDIV3_LCDCFRAC_BITS)
+
+/*
+ * Misc Control Register
+ */
+/* 60 MHz ULPI clock (ULPI_CLK) output enable */
+#define KINETIS_SIM_MCR_ULPICLKOBE_MSK (1 << 30)
+/* Start LCDC display */
+#define KINETIS_SIM_MCR_LCDSTART_MSK (1 << 16)
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _MACH_KINETIS_KINETIS_H */
diff --git a/arch/arm/mach-kinetis/kinetis_platform.c b/arch/arm/mach-kinetis/kinetis_platform.c
new file mode 100644
index 0000000..f1b6607
--- /dev/null
+++ b/arch/arm/mach-kinetis/kinetis_platform.c
@@ -0,0 +1,61 @@
+/*
+ * kinetis_platform.c - Freescale Kinetis K70F120M Development Board
+ *
+ * Based on legacy pre-OF code by Alexander Potashev <aspotashev@emcraft.com>
+ *
+ * (C) Copyright 2011, 2012
+ * Emcraft Systems, <www.emcraft.com>
+ * Alexander Potashev <aspotashev@emcraft.com>
+ *
+ * Copyright (C) 2015 Paul Osmialowski <pawelo@king.net.pl>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/of_platform.h>
+#include <asm/v7m.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+/*
+ * Map required regions.
+ * This being the no-MMU Linux, I am not mapping anything
+ * since all I/O registers are available at their physical addresses.
+ */
+static void __init kinetis_map_io(void)
+{
+}
+
+/*
+ * Freescale Kinetis platform initialization
+ */
+static void __init kinetis_init(void)
+{
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+}
+
+static const char *const kinetis_compat[] __initconst = {
+ "fsl,kinetis-twr-k70f120m",
+ NULL
+};
+
+/*
+ * Freescale Kinetis platform machine description
+ */
+DT_MACHINE_START(KINETIS, "Freescale Kinetis")
+ .dt_compat = kinetis_compat,
+ .restart = armv7m_restart,
+ /*
+ * Physical address of the serial port used for the early
+ * kernel debugging.
+ * This address is actually never used in the MMU-less kernel
+ * (since no mapping is needed to access this port),
+ * but let's keep these fields filled out for consistency.
+ */
+ .map_io = kinetis_map_io,
+ .init_machine = kinetis_init,
+MACHINE_END
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index d19cb4d..b611ac6 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -618,6 +618,7 @@ config CPU_V7M_NUM_IRQ
depends on CPU_V7M
default 90 if ARCH_STM32
default 38 if ARCH_EFM32
+ default 106 if ARCH_KINETIS
default 112 if SOC_VF610
default 240
help
diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index 2ed1b8a..1d05516 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -554,6 +554,7 @@ smdk4412 MACH_SMDK4412 SMDK4412 3765
marzen MACH_MARZEN MARZEN 3790
krome MACH_KROME KROME 3797
armadillo800eva MACH_ARMADILLO800EVA ARMADILLO800EVA 3863
+kinetis MACH_KINETIS KINETIS 3896
mx53_umobo MACH_MX53_UMOBO MX53_UMOBO 3927
mt4 MACH_MT4 MT4 3981
u8520 MACH_U8520 U8520 3990
--
2.3.6


\
 
 \ /
  Last update: 2015-06-24 00:21    [W:0.182 / U:0.360 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site