lkml.org 
[lkml]   [2015]   [May]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] mlx4_core: Fix fallback from MSI-X to INTx
Date
The test in mlx4_load_one() to remove MLX4_FLAG_MSI_X expects mlx4_NOP() to
fail with -EBUSY. It is also necessary to avoid the reset since the device
is not fully reinitialized before calling mlx4_start_hca() a second time.

Note that this will also affect mlx4_test_interrupts(), the only other user
of MLX4_CMD_NOP.

Fixes: f5aef5a ("net/mlx4_core: Activate reset flow upon fatal command cases")
Signed-off-by: Benjamin Poirier <bpoirier@suse.de>
---
drivers/net/ethernet/mellanox/mlx4/cmd.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx4/cmd.c b/drivers/net/ethernet/mellanox/mlx4/cmd.c
index 4f7dc04..529ef05 100644
--- a/drivers/net/ethernet/mellanox/mlx4/cmd.c
+++ b/drivers/net/ethernet/mellanox/mlx4/cmd.c
@@ -714,8 +714,13 @@ static int mlx4_cmd_wait(struct mlx4_dev *dev, u64 in_param, u64 *out_param,
msecs_to_jiffies(timeout))) {
mlx4_warn(dev, "command 0x%x timed out (go bit not cleared)\n",
op);
- err = -EIO;
- goto out_reset;
+ if (op == MLX4_CMD_NOP) {
+ err = -EBUSY;
+ goto out;
+ } else {
+ err = -EIO;
+ goto out_reset;
+ }
}

err = context->result;
--
2.3.5


\
 
 \ /
  Last update: 2015-05-23 02:01    [W:0.036 / U:0.272 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site