lkml.org 
[lkml]   [2015]   [Apr]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v3 0/7] ARM: at91/dt: kizbox: update and rename to at91-kizbox
Date
Hi,

This patchset renames the kizbox board into at91-kizbox to match AT91 naming
convention, sanitize and sorts nodes by address when possible (or
alphabetically if not applicable).

It also updates the following features:
- uses proper serial uart (only USART3 is accessible),
- fixes gpio-keys active level and rename,
- moves leds to pwm support (using tcb-pwm driver) and rename as well,
- re-sizes nand mtd partitions and
- updates chosen-node (bootargs + set linux stdout path to DBGU),

Regards,
Gaël PORTAY

Changes since v1:
- Split into patches for review

Changes since v2:
- Rebase onto v4.0.1
- Change board-name in comments at rename (patch 1)

Gaël PORTAY (7):
ARM: at91/dt: kizbox: rename to at91-kizbox
ARM: at91/dt: at91-kizbox: sanitize file
ARM: at91/dt: at91-kizbox: user proper serial uart
ARM: at91/dt: at91-kizbox: gpio-keys related changes
ARM: at91/dt: at91-kizbox: leds related changes
ARM: at91/dt: at91-kizbox: re-size nand partitions
ARM: at91/dt: at91-kizbox: update chosen node

arch/arm/boot/dts/Makefile | 2 +-
arch/arm/boot/dts/at91-kizbox.dts | 159 ++++++++++++++++++++++++++++++++++++++
arch/arm/boot/dts/kizbox.dts | 150 -----------------------------------
3 files changed, 160 insertions(+), 151 deletions(-)
create mode 100644 arch/arm/boot/dts/at91-kizbox.dts
delete mode 100644 arch/arm/boot/dts/kizbox.dts

--
1.9.1



\
 
 \ /
  Last update: 2015-04-30 10:21    [W:0.116 / U:0.360 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site