Messages in this thread | | | From | Gaël PORTAY <> | Subject | [PATCH v4 0/2] ARM: at91/dt: add support for at91-kizboxmini | Date | Thu, 16 Apr 2015 19:19:14 +0200 |
| |
Hi,
Here are two patches to bring support for a new hardware based on SAM9G25 SoC.
The first one adds the PIN controller definition for PWM0. The second defines the new board.
Changes since v1: - drop useless comments - move pwm0 pinctrl's node close to tcb0 - drop ek boards from compatible machine - add at91sam9g25 board to compatible machine
Changes since v2: - update to v4.0 - fix alphabetical order between gpio_keys and pwm_leds
Changes since v3: - add num-ports = <1> attribute to ohci node
PS: My apologies for this last minute update.
Gaël PORTAY (2): ARM: at91/dt: sam9x5: add pinctrl for pwm0 ARM: at91/dt: add support for kizboxmini
arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/at91-kizboxmini.dts | 130 ++++++++++++++++++++++++++++++++++ arch/arm/boot/dts/at91sam9x5.dtsi | 46 ++++++++++++ 3 files changed, 177 insertions(+) create mode 100644 arch/arm/boot/dts/at91-kizboxmini.dts
-- 1.9.3
| |