lkml.org 
[lkml]   [2015]   [Mar]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/2] serial: 8250: allow specifying iomem size in addition to address
Date
This adds a mapsize field to struct uart_port to be used in
conjunction with mapbase. If set, it overrides whatever value
serial8250_port_size() would otherwise report.

Signed-off-by: Mans Rullgard <mans@mansr.com>
---
drivers/tty/serial/8250/8250_core.c | 4 ++++
include/linux/serial_core.h | 1 +
2 files changed, 5 insertions(+)

diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index 58a9283..60bf876 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -2722,6 +2722,8 @@ serial8250_pm(struct uart_port *port, unsigned int state,

static unsigned int serial8250_port_size(struct uart_8250_port *pt)
{
+ if (pt->port.mapsize)
+ return pt->port.mapsize;
if (pt->port.iotype == UPIO_AU) {
if (pt->port.type == PORT_RT2880)
return 0x100;
@@ -3415,6 +3417,7 @@ int __init early_serial_setup(struct uart_port *port)
p->iotype = port->iotype;
p->flags = port->flags;
p->mapbase = port->mapbase;
+ p->mapsize = port->mapsize;
p->private_data = port->private_data;
p->type = port->type;
p->line = port->line;
@@ -3669,6 +3672,7 @@ int serial8250_register_8250_port(struct uart_8250_port *up)
uart->port.flags = up->port.flags | UPF_BOOT_AUTOCONF;
uart->bugs = up->bugs;
uart->port.mapbase = up->port.mapbase;
+ uart->port.mapsize = up->port.mapsize;
uart->port.private_data = up->port.private_data;
uart->port.fifosize = up->port.fifosize;
uart->tx_loadsz = up->tx_loadsz;
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index baf3e1d..74a2647 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -236,6 +236,7 @@ struct uart_port {
unsigned int custom_divisor;
unsigned int line; /* port index */
resource_size_t mapbase; /* for ioremap */
+ resource_size_t mapsize;
struct device *dev; /* parent device */
unsigned char hub6; /* this should be in the 8250 driver */
unsigned char suspended;
--
2.3.1


\
 
 \ /
  Last update: 2015-03-08 15:41    [W:0.271 / U:0.636 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site