Messages in this thread | | | Date | Sat, 21 Mar 2015 21:09:57 +0100 | From | Pavel Machek <> | Subject | tqm8315 + ds1337: problems |
| |
Hi!
Something is wrong with real time clock on tqm8315 board... or maybe with i2c on board, as I have trouble reading same information from u-boot using "i2c md" commands:
Does rtc work for you on tqm8315? Any ideas how to debug this further?
Thanks, Pavel
[ 1.480289] i2c /dev entries driver [ 1.484371] mpc-i2c e0003000.i2c: initializing [ 1.489119] mpc-i2c e0003000.i2c: clock 378787 Hz (dfsrr=6 fdr=1) [ 1.495330] mpc-i2c e0003000.i2c: timeout 1000000 us [ 1.501640] mpc-i2c e0003000.i2c: Doing write 1 bytes to 0x68 - 1 of 2 messa ges [ 1.512126] mpc-i2c e0003000.i2c: Doing read 2 bytes to 0x68 - 2 of 2 messag es [ 1.519696] mpc-i2c e0003000.i2c: Doing write 2 bytes to 0x68 - 1 of 1 messa ges [ 1.527413] mpc-i2c e0003000.i2c: Doing write 1 bytes to 0x68 - 1 of 2 messa ges [ 1.534959] mpc-i2c e0003000.i2c: Doing read 8 bytes to 0x68 - 2 of 2 messag es [ 1.542951] mpc-i2c e0003000.i2c: Doing write 1 bytes to 0x68 - 1 of 2 messa ges [ 1.550552] mpc-i2c e0003000.i2c: Doing read 7 bytes to 0x68 - 2 of 2 messag es [ 1.558329] rtc-ds1307 0-0068: read: 07 39 00 06 00 81 01 [ 1.563868] rtc-ds1307 0-0068: read secs=7, mins=39, hours=0, mday=0, mon=0, year=101, wday=5 [ 1.572493] rtc (null): read_time: fail to read [ 1.577664] rtc-ds1307 0-0068: rtc core: registered ds1337 as rtc0 [ 1.584476] at24 0-0057: 32768 byte 24c256 EEPROM, writable, 64 bytes/write [ 1.592483] mpc-i2c e0003000.i2c: Doing write 1 bytes to 0x48 - 1 of 2 messa ges [ 1.602493] mpc-i2c e0003000.i2c: Doing read 1 bytes to 0x48 - 2 of 2 messag es [ 1.610538] lm75 0-0048: hwmon0: sensor 'lm75' [ 1.615870] TCP: cubic registered [ 1.619331] NET: Registered protocol family 17 [ 1.624127] Key type dns_resolver registered [ 1.633413] mpc-i2c e0003000.i2c: Doing write 1 bytes to 0x68 - 1 of 2 messa ges [ 1.641012] mpc-i2c e0003000.i2c: Doing read 7 bytes to 0x68 - 2 of 2 messag es [ 1.648787] rtc-ds1307 0-0068: read: 07 39 00 06 00 81 01 [ 1.654305] rtc-ds1307 0-0068: read secs=7, mins=39, hours=0, mday=0, mon=0, year=101, wday=5 [ 1.662921] rtc rtc0: read_time: fail to read [ 1.667375] rtc-ds1307 0-0068: hctosys: unable to read the hardware clock [ 1.739679] gianfar: not advertising gigabit [ 1.851232] ata2: No Device OR PHYRDY change,Hstatus = 0xa0000000 [ 1.857466] ata2: SATA link down (SStatus 0 SControl 300) [ 1.863072] ata1: Signature Update detected @ 508 msecs [ 2.039242] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
-- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
| |