Messages in this thread | | | From | Ian Kumlien <> | Date | Mon, 23 Feb 2015 15:56:56 +0100 | Subject | [igb] AER timeout - resend. |
| |
Sending this to both netdev and kernel since i don't know if it's the driver or the pcie AER that does something odd - the machine was stable before 3.19 and PCIE AER.
Everything started out like i first sent to linux nics () intel: ------
And today i had some issues and wondered why things was broken, i was met with:
[950016.366477] pcieport 0000:00:04.0: AER: Uncorrected (Non-Fatal) error received: id=0500 [950016.366495] igb 0000:05:00.0: PCIe Bus Error: severity=Uncorrected (Non-Fatal), type=Transaction Layer, id=0500(Requester ID) [950016.366502] igb 0000:05:00.0: device [8086:1521] error status/mask=00004000/00000000 [950016.366509] igb 0000:05:00.0: [14] Completion Timeout [950016.366519] igb 0000:05:00.0: broadcast error_detected message [950016.379742] br0: port 1(enp5s0f0) entered disabled state [950016.488213] igb 0000:05:00.0: broadcast slot_reset message [950016.588014] igb 0000:05:00.0: broadcast resume message [950016.752654] igb 0000:05:00.0: AER: Device recovery successful [950019.817249] igb 0000:05:00.1 enp5s0f1: igb: enp5s0f1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [950020.699773] igb 0000:05:00.0 enp5s0f0: igb: enp5s0f0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [950020.701485] br0: port 1(enp5s0f0) entered forwarding state [950020.701504] br0: port 1(enp5s0f0) entered forwarding state [976152.448092] ata5: exception Emask 0x50 SAct 0x0 SErr 0x4090800 action 0xe frozen [976152.448100] ata5: irq_stat 0x00400040, connection status changed [976152.448107] ata5: SError: { HostInt PHYRdyChg 10B8B DevExch } [976152.448117] ata5: hard resetting link [976152.448134] ata6: exception Emask 0x50 SAct 0x0 SErr 0x4090800 action 0xe frozen [976152.448140] ata6: irq_stat 0x00400040, connection status changed [976152.448147] ata6: SError: { HostInt PHYRdyChg 10B8B DevExch } [976152.448155] ata6: hard resetting link [976153.171195] ata6: SATA link down (SStatus 0 SControl 300) [976158.174058] ata6: hard resetting link [976158.174110] ata5: SATA link down (SStatus 0 SControl 300) [976163.176997] ata5: hard resetting link [976163.480133] ata6: SATA link down (SStatus 0 SControl 300) [976163.480147] ata6: limiting SATA link speed to 1.5 Gbps [976168.483028] ata6: hard resetting link [976168.483095] ata5: SATA link down (SStatus 0 SControl 300) [976168.483108] ata5: limiting SATA link speed to 1.5 Gbps [976173.485907] ata5: hard resetting link [976173.789066] ata6: SATA link down (SStatus 0 SControl 310) [976173.789080] ata6.00: disabled [976173.791066] ata6: EH complete [976173.791078] ata5: SATA link down (SStatus 0 SControl 310) [976173.791085] ata6.00: detaching (SCSI 5:0:0:0) [976173.791090] ata5.00: disabled [976173.794073] ata5: EH complete [976173.794100] ata5.00: detaching (SCSI 4:0:0:0) [976173.794968] sd 5:0:0:0: [sdb] Synchronizing SCSI cache [976173.795073] sd 5:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=0x04 driverbyte=0x00 [976173.795080] sd 5:0:0:0: [sdb] Stopping disk [976173.795108] sd 5:0:0:0: [sdb] Start/Stop Unit failed: Result: hostbyte=0x04 driverbyte=0x00 [976173.797180] sd 4:0:0:0: [sda] Synchronizing SCSI cache [976173.797254] sd 4:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=0x04 driverbyte=0x00 [976173.797261] sd 4:0:0:0: [sda] Stopping disk [976173.797285] sd 4:0:0:0: [sda] Start/Stop Unit failed: Result: hostbyte=0x04 driverbyte=0x00
So two out of two disks just failed and isn't replying anymore?
Seven hours after a AER this machine who's intel ssd:s are idle just fail to respond? ;)
Anyway, will reboot it when i get home - any idea/suggestion is more than welcome.
| |