lkml.org 
[lkml]   [2015]   [Dec]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] tty/serial: Skip 'NULL' char after console break when sysrq enabled
Date
When sysrq is triggered from console, serial driver for SUN hypervisor
console receives a console break and enables the sysrq. It expects a valid
sysrq char following with break. Meanwhile if driver receives 'NULL'
ASCII char then it disables sysrq and sysrq handler will never be invoked.

This fix skips calling uart sysrq handler when 'NULL' is received while
sysrq is enabled.

Signed-off-by: Vijay Kumar <vijay.ac.kumar@oracle.com>
Acked-by: Karl Volz <karl.volz@oracle.com>
---
drivers/tty/serial/sunhv.c | 6 ++++--
1 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/tty/serial/sunhv.c b/drivers/tty/serial/sunhv.c
index 0640318..163ae5d 100644
--- a/drivers/tty/serial/sunhv.c
+++ b/drivers/tty/serial/sunhv.c
@@ -148,8 +148,10 @@ static int receive_chars_read(struct uart_port *port)
uart_handle_dcd_change(port, 1);
}

- for (i = 0; i < bytes_read; i++)
- uart_handle_sysrq_char(port, con_read_page[i]);
+ if (port->sysrq != 0 && *con_read_page) {
+ for (i = 0; i < bytes_read; i++)
+ uart_handle_sysrq_char(port, con_read_page[i]);
+ }

if (port->state == NULL)
continue;
--
1.7.1


\
 
 \ /
  Last update: 2015-12-23 20:21    [W:0.045 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site