lkml.org 
[lkml]   [2015]   [Dec]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] dmaengine: xgene-dma: Fix double IRQ issue by setting IRQ_DISABLE_UNLAZY flag
Date
For interrupt controller that doesn't support irq_disable and hardware
with level interrupt, an extra interrupt can be pending. This patch fixes
the issue by setting IRQ_DISABLE_UNLAZY flag for the interrupt line.

Reference: http://git.kernel.org/tip/e9849777d0e27cdd2902805be51da73e7c79578c

Signed-off-by: Rameshwar Prasad Sahu <rsahu@apm.com>
---
drivers/dma/xgene-dma.c | 4 ++++
1 files changed, 4 insertions(+), 0 deletions(-)

diff --git a/drivers/dma/xgene-dma.c b/drivers/dma/xgene-dma.c
index 9dfa2b0..6363e84 100644
--- a/drivers/dma/xgene-dma.c
+++ b/drivers/dma/xgene-dma.c
@@ -29,6 +29,7 @@
#include <linux/dmapool.h>
#include <linux/interrupt.h>
#include <linux/io.h>
+#include <linux/irq.h>
#include <linux/module.h>
#include <linux/of_device.h>

@@ -1610,6 +1611,7 @@ static int xgene_dma_request_irqs(struct xgene_dma *pdma)
/* Register DMA channel rx irq */
for (i = 0; i < XGENE_DMA_MAX_CHANNEL; i++) {
chan = &pdma->chan[i];
+ irq_set_status_flags(chan->rx_irq, IRQ_DISABLE_UNLAZY);
ret = devm_request_irq(chan->dev, chan->rx_irq,
xgene_dma_chan_ring_isr,
0, chan->name, chan);
@@ -1620,6 +1622,7 @@ static int xgene_dma_request_irqs(struct xgene_dma *pdma)

for (j = 0; j < i; j++) {
chan = &pdma->chan[i];
+ irq_clear_status_flags(chan->rx_irq, IRQ_DISABLE_UNLAZY);
devm_free_irq(chan->dev, chan->rx_irq, chan);
}

@@ -1640,6 +1643,7 @@ static void xgene_dma_free_irqs(struct xgene_dma *pdma)

for (i = 0; i < XGENE_DMA_MAX_CHANNEL; i++) {
chan = &pdma->chan[i];
+ irq_clear_status_flags(chan->rx_irq, IRQ_DISABLE_UNLAZY);
devm_free_irq(chan->dev, chan->rx_irq, chan);
}
}
--
1.7.1

\
 
 \ /
  Last update: 2015-12-23 14:01    [W:0.035 / U:0.096 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site