lkml.org 
[lkml]   [2015]   [Oct]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] rtc: at91rm9200: clear RTC alarm status flag prior to suspending
Date
As said in the SAMA5D2 datasheet, "Prior to instructing the device
to enter ULP mode 1, ... and the internal sources of wake-up must
be cleared."

This patch is to clear the RTC alarm status flag prior to suspending
to avoid the erroneous wake-up activity, as it is often used as
the wake-up source for the ULP mode 1.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
---

Changes in v2:
- Add more detail commit log.

drivers/rtc/rtc-at91rm9200.c | 2 ++
1 file changed, 2 insertions(+)

diff --git a/drivers/rtc/rtc-at91rm9200.c b/drivers/rtc/rtc-at91rm9200.c
index cb62e21..b60fd47 100644
--- a/drivers/rtc/rtc-at91rm9200.c
+++ b/drivers/rtc/rtc-at91rm9200.c
@@ -495,6 +495,8 @@ static int at91_rtc_suspend(struct device *dev)
/* this IRQ is shared with DBGU and other hardware which isn't
* necessarily doing PM like we are...
*/
+ at91_rtc_write(AT91_RTC_SCCR, AT91_RTC_ALARM);
+
at91_rtc_imr = at91_rtc_read_imr()
& (AT91_RTC_ALARM|AT91_RTC_SECEV);
if (at91_rtc_imr) {
--
1.7.9.5


\
 
 \ /
  Last update: 2015-10-12 11:01    [W:0.080 / U:1.452 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site