Messages in this thread | | | Date | Thu, 29 Jan 2015 06:10:27 -0800 | From | Guenter Roeck <> | Subject | Re: [lm-sensors] [PATCH] hwmon: (ads7828) Make sample interval configurable |
| |
On 01/29/2015 04:07 AM, Robert Rosengren wrote: > On 01/29/2015 08:05 AM, Guenter Roeck wrote: >> Ah, don't bother then. I should hopefully get the samples in a couple of days. > > i2cdump was easily built, so here is the output: > 0,8 1,9 2,a 3,b 4,c 5,d 6,e 7,f > 00: 1301 1301 1301 1301 1301 1301 1301 1301 > 08: 4101 6901 6a01 6901 6901 6901 6901 6901 > 10: 0200 0100 0100 0100 0100 0100 0100 0100 > 18: 0100 0100 0100 0100 0100 0100 0100 0100 > 20: 0200 0100 0100 0100 0100 0100 0100 0100 > 28: 0100 0100 0100 0100 0100 0100 0100 0100 > 30: 0200 0100 0100 0100 0100 0100 0100 0100 > 38: 0100 0100 0100 0100 0100 0100 0100 0100 > 40: 0000 0000 0000 0000 0000 0000 0000 0000 > 48: 0000 0000 0000 0000 0000 0000 0000 0000 > 50: 0200 0100 0100 0100 0100 0100 0100 0100 > 58: 0100 0100 0100 0100 0100 0100 0200 0100 > 60: 0100 0100 0100 0100 0100 0100 0100 0100 > 68: 0100 0100 0100 0100 0100 0100 0100 0100 > 70: 0200 0100 0100 0100 0100 0100 0100 0100 > 78: 0100 0100 0100 0100 0100 0100 0100 0100 > 80: 6501 2401 1701 1401 1301 1301 1301 1301 > 88: 4201 6901 6901 6901 6901 6901 6901 6901 > 90: 0200 0100 0100 0100 0100 0100 0100 0100 > 98: 0100 0100 0100 0100 0100 0100 0100 0100 > a0: 6701 2501 1901 1601 1501 1501 1501 1501 > a8: 4401 6c01 6c01 6c01 6c01 6c01 6c01 6c01 > b0: 0200 0100 0100 0100 0100 0100 0100 0100 > b8: 0100 0100 0100 0100 0100 0100 0100 0100 > c0: 0200 0100 0100 0100 0100 0100 0100 0100 > c8: 0100 0100 0100 0100 0100 0100 0100 0100 > d0: 0200 0100 0100 0100 0100 0100 0100 0100 > d8: 0100 0100 0100 0100 0100 0100 0100 0100 > e0: 6701 2801 1b01 1701 1601 1501 1501 1501 > e8: 4401 6c01 6c01 6c01 6c01 6c01 6c01 6c01 > f0: 0200 0100 0100 0100 0100 0100 0100 0100 > f8: 0100 0100 0100 0100 0100 0100 0100 0100 > > I checked the value at 0x84 (channel 0, and using single-ended and external reference). I got 222 when reading from corresponding sysfs, and 0x131 * lsb_resolution (806) / 1000 is 222 in decimal. So it seems as data above is correct. > > Is the data what you expected? > Yes and no. With the above data, the old version of the driver (non-regmap) works as expected. The driver supporting regmap, however, needs the byte swap to work correctly.
Guenter
| |