Messages in this thread | | | Date | Thu, 29 Jan 2015 13:07:10 +0100 | From | Robert Rosengren <> | Subject | Re: [lm-sensors] [PATCH] hwmon: (ads7828) Make sample interval configurable |
| |
On 01/29/2015 08:05 AM, Guenter Roeck wrote: > Ah, don't bother then. I should hopefully get the samples in a couple of days.
i2cdump was easily built, so here is the output: 0,8 1,9 2,a 3,b 4,c 5,d 6,e 7,f 00: 1301 1301 1301 1301 1301 1301 1301 1301 08: 4101 6901 6a01 6901 6901 6901 6901 6901 10: 0200 0100 0100 0100 0100 0100 0100 0100 18: 0100 0100 0100 0100 0100 0100 0100 0100 20: 0200 0100 0100 0100 0100 0100 0100 0100 28: 0100 0100 0100 0100 0100 0100 0100 0100 30: 0200 0100 0100 0100 0100 0100 0100 0100 38: 0100 0100 0100 0100 0100 0100 0100 0100 40: 0000 0000 0000 0000 0000 0000 0000 0000 48: 0000 0000 0000 0000 0000 0000 0000 0000 50: 0200 0100 0100 0100 0100 0100 0100 0100 58: 0100 0100 0100 0100 0100 0100 0200 0100 60: 0100 0100 0100 0100 0100 0100 0100 0100 68: 0100 0100 0100 0100 0100 0100 0100 0100 70: 0200 0100 0100 0100 0100 0100 0100 0100 78: 0100 0100 0100 0100 0100 0100 0100 0100 80: 6501 2401 1701 1401 1301 1301 1301 1301 88: 4201 6901 6901 6901 6901 6901 6901 6901 90: 0200 0100 0100 0100 0100 0100 0100 0100 98: 0100 0100 0100 0100 0100 0100 0100 0100 a0: 6701 2501 1901 1601 1501 1501 1501 1501 a8: 4401 6c01 6c01 6c01 6c01 6c01 6c01 6c01 b0: 0200 0100 0100 0100 0100 0100 0100 0100 b8: 0100 0100 0100 0100 0100 0100 0100 0100 c0: 0200 0100 0100 0100 0100 0100 0100 0100 c8: 0100 0100 0100 0100 0100 0100 0100 0100 d0: 0200 0100 0100 0100 0100 0100 0100 0100 d8: 0100 0100 0100 0100 0100 0100 0100 0100 e0: 6701 2801 1b01 1701 1601 1501 1501 1501 e8: 4401 6c01 6c01 6c01 6c01 6c01 6c01 6c01 f0: 0200 0100 0100 0100 0100 0100 0100 0100 f8: 0100 0100 0100 0100 0100 0100 0100 0100
I checked the value at 0x84 (channel 0, and using single-ended and external reference). I got 222 when reading from corresponding sysfs, and 0x131 * lsb_resolution (806) / 1000 is 222 in decimal. So it seems as data above is correct.
Is the data what you expected?
> > Is your hardware big endian or little endian ? CONFIG_CPU_LITTLE_ENDIAN=y
BR, Robert
| |