lkml.org 
[lkml]   [2015]   [Jan]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/6] extcon: max77843: Add max77843 MUIC driver
Hi Jaewon,

On 01/23/2015 02:02 PM, Jaewon Kim wrote:
> This patch adds MAX77843 extcon driver to support for MUIC(Micro

Add company name (MAX77843 -> Maxim MAX77843)

> USB Interface Controller) device by using EXTCON subsystem to handle
> various external connectors.
>
> Cc: Chanwoo Choi <cw00.choi@samsung.com>
> Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com>
> ---
> drivers/extcon/Kconfig | 10 +
> drivers/extcon/Makefile | 1 +
> drivers/extcon/extcon-max77843.c | 871 ++++++++++++++++++++++++++++++++++++++
> 3 files changed, 882 insertions(+)
> create mode 100644 drivers/extcon/extcon-max77843.c
>
> diff --git a/drivers/extcon/Kconfig b/drivers/extcon/Kconfig
> index 6a1f7de..0b67538 100644
> --- a/drivers/extcon/Kconfig
> +++ b/drivers/extcon/Kconfig
> @@ -55,6 +55,16 @@ config EXTCON_MAX77693
> Maxim MAX77693 PMIC. The MAX77693 MUIC is a USB port accessory
> detector and switch.
>
> +config EXTCON_MAX77843
> + tristate "MAX77843 EXTCON Support"
> + depends on MFD_MAX77843
> + select IRQ_DOMAIN
> + select REGMAP_I2C
> + help
> + If you say yes here you get support for the MUIC device of
> + Maxim MAX77843. The MAX77843 MUIC is a USB port accessory
> + detector add switch.
> +
> config EXTCON_MAX8997
> tristate "MAX8997 EXTCON Support"
> depends on MFD_MAX8997 && IRQ_DOMAIN
> diff --git a/drivers/extcon/Makefile b/drivers/extcon/Makefile
> index 0370b42..f21d5c4 100644
> --- a/drivers/extcon/Makefile
> +++ b/drivers/extcon/Makefile
> @@ -8,6 +8,7 @@ obj-$(CONFIG_EXTCON_ARIZONA) += extcon-arizona.o
> obj-$(CONFIG_EXTCON_GPIO) += extcon-gpio.o
> obj-$(CONFIG_EXTCON_MAX14577) += extcon-max14577.o
> obj-$(CONFIG_EXTCON_MAX77693) += extcon-max77693.o
> +obj-$(CONFIG_EXTCON_MAX77843) += extcon-max77843.o
> obj-$(CONFIG_EXTCON_MAX8997) += extcon-max8997.o
> obj-$(CONFIG_EXTCON_PALMAS) += extcon-palmas.o
> obj-$(CONFIG_EXTCON_RT8973A) += extcon-rt8973a.o
> diff --git a/drivers/extcon/extcon-max77843.c b/drivers/extcon/extcon-max77843.c
> new file mode 100644
> index 0000000..caae9a7
> --- /dev/null
> +++ b/drivers/extcon/extcon-max77843.c
> @@ -0,0 +1,871 @@
> +/*
> + * extcon-max77843.c - MAX77843 extcon driver to support MUIC
> + *
> + * Copyright (C) 2014 Samsung Electrnoics
> + * Author: Jaewon Kim <jaewon02.kim@samsung.com>

Remove un-necessary blank before 'Author'.

> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +
> +#include <linux/extcon.h>
> +#include <linux/i2c.h>
> +#include <linux/interrupt.h>
> +#include <linux/kernel.h>
> +#include <linux/mfd/max77843-private.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/workqueue.h>
> +
> +#define DELAY_MS_DEFAULT 15000 /* unit: millisecond */
> +
> +enum max77843_muic_acc_type {
> + MAX77843_MUIC_ADC_GROUND = 0,
> + MAX77843_MUIC_ADC_SEND_END_BUTTON,
> + MAX77843_MUIC_ADC_REMOTE_S1_BUTTON,
> + MAX77843_MUIC_ADC_REMOTE_S2_BUTTON,
> + MAX77843_MUIC_ADC_REMOTE_S3_BUTTON,
> + MAX77843_MUIC_ADC_REMOTE_S4_BUTTON,
> + MAX77843_MUIC_ADC_REMOTE_S5_BUTTON,
> + MAX77843_MUIC_ADC_REMOTE_S6_BUTTON,
> + MAX77843_MUIC_ADC_REMOTE_S7_BUTTON,
> + MAX77843_MUIC_ADC_REMOTE_S8_BUTTON,
> + MAX77843_MUIC_ADC_REMOTE_S9_BUTTON,
> + MAX77843_MUIC_ADC_REMOTE_S10_BUTTON,
> + MAX77843_MUIC_ADC_REMOTE_S11_BUTTON,
> + MAX77843_MUIC_ADC_REMOTE_S12_BUTTON,
> + MAX77843_MUIC_ADC_RESERVED_ACC_1,
> + MAX77843_MUIC_ADC_RESERVED_ACC_2,
> + MAX77843_MUIC_ADC_RESERVED_ACC_3,
> + MAX77843_MUIC_ADC_RESERVED_ACC_4,
> + MAX77843_MUIC_ADC_RESERVED_ACC_5,
> + MAX77843_MUIC_ADC_AUDIO_DEVICE_TYPE2,
> + MAX77843_MUIC_ADC_PHONE_POWERED_DEV,
> + MAX77843_MUIC_ADC_TTY_CONVERTER,
> + MAX77843_MUIC_ADC_UART_CABLE,
> + MAX77843_MUIC_ADC_CEA936A_TYPE1_CHG,
> + MAX77843_MUIC_ADC_FACTORY_MODE_USB_OFF,
> + MAX77843_MUIC_ADC_FACTORY_MODE_USB_ON,
> + MAX77843_MUIC_ADC_AV_CABLE_NOLOAD,
> + MAX77843_MUIC_ADC_CEA936A_TYPE2_CHG,
> + MAX77843_MUIC_ADC_FACTORY_MODE_UART_OFF,
> + MAX77843_MUIC_ADC_FACTORY_MODE_UART_ON,
> + MAX77843_MUIC_ADC_AUDIO_DEVICE_TYPE1,
> + MAX77843_MUIC_ADC_OPEN,
> +};
> +
> +enum max77843_muic_cable_group {
> + MAX77843_CABLE_GROUP_ADC = 0,
> + MAX77843_CABLE_GROUP_CHG,
> + MAX77843_CABLE_GROUP_GND,
> +};

Cable group show the category of supported cables.
I think you better move this enum on upper of 'enum max77843_muic_acc_type'

> +
> +enum max77843_muic_adv_debounce_time {
> + MAX77843_DEBOUNCE_TIME_5MS = 0,
> + MAX77843_DEBOUNCE_TIME_10MS,
> + MAX77843_DEBOUNCE_TIME_25MS,
> + MAX77843_DEBOUNCE_TIME_38_62MS,
> +};
> +
> +enum max77843_muic_support_list {

Use only 'enum' keyword without 'max77843_muic_support_list' enum name.

> + EXTCON_CABLE_USB = 0,
> + EXTCON_CABLE_USB_HOST,
> + EXTCON_CABLE_USB_HOST_TA,
> + EXTCON_CABLE_TA,
> + EXTCON_CABLE_FAST_CHARGER,
> + EXTCON_CABLE_SLOW_CHARGER,
> + EXTCON_CABLE_CHARGE_DOWNSTREAM,
> + EXTCON_CABLE_MHL,
> + EXTCON_CABLE_MHL_TA,
> + EXTCON_CABLE_JIG_USB_ON,
> + EXTCON_CABLE_JIG_USB_OFF,
> + EXTCON_CABLE_JIG_UART_OFF,
> + EXTCON_CABLE_JIG_UART_ON,
> +
> + EXTCON_CABLE_NUM,
> +};
> +
> +enum max77843_muic_gnd_cable {
> + MAX77843_MUIC_GND_USB_OTG = 0x0,
> + MAX77843_MUIC_GND_USB_OTG_VB = 0x1,
> + MAX77843_MUIC_GND_MHL = 0x2,
> + MAX77843_MUIC_GND_MHL_VB = 0x3,

Why do you need 'max77843_muic_gnd_cable' enum?
You have to express supported all cables in 'max77843_muic_acc_type' enum list.
If you define one more cables enumeration, It is possible to incur the confusion
of what this driver is supported cable.


> +
> + MAX77843_MUIC_GND_NUM,
> +};
> +
> +enum max77843_muic_status {
> + MAX77843_MUIC_STATUS1 = 0,
> + MAX77843_MUIC_STATUS2,
> + MAX77843_MUIC_STATUS3,
> +
> + MAX77843_MUIC_STATUS_NUM,
> +};
> +
> +enum max77843_muic_charger_type {
> + MAX77843_CHG_TYPE_NONE = 0,
> + MAX77843_CHG_TYPE_USB,
> + MAX77843_CHG_TYPE_DOWNSTREAM,
> + MAX77843_CHG_TYPE_DEDICATED,
> + MAX77843_CHG_TYPE_SPECIAL_500MA,
> + MAX77843_CHG_TYPE_SPECIAL_1A,
> + MAX77843_CHG_TYPE_SPECIAL_BIAS,
> +
> + MAX77843_CHG_TYPE_END,
> +};
> +
> +enum max77843_muic_detection {
> + MAX77843_MUIC_AUTO_NONE = 0,
> + MAX77843_MUIC_AUTO_USB,
> + MAX77843_MUIC_AUTO_FAC,
> + MAX77843_MUIC_AUTO_USB_FAC,
> +};

It it wrong. This enum is used to write the value to MUIC register.
You have to define it in max77843-private.h with 'enum' keyword.
I think you could refer other definition in max77843-private.h.

You have to re-order the definition by using follwoing sequence
to improbe readability.
1. cable group
2. supported cables
3. other definition with enum

Also,
I'm difficult to understand the meaning of enum definition.
MAX77843_MUIC_*
MAX77843_CABLE_*
MAX77843_DEBOUNCE_*
MAX77843_CHG_*

I think you need to clarify the meaning of enum definition
by makingt the name pattern to improve readability.

> +
> +struct max77843_muic_info {
> + struct device *dev;
> + struct max77843 *max77843;
> + struct extcon_dev *edev;
> +
> + struct mutex mutex;
> + struct work_struct irq_work;
> + struct delayed_work wq_detcable;
> + struct max77843_muic_irq *muic_irqs;
> +
> + u8 status[MAX77843_MUIC_STATUS_NUM];
> + int prev_cable_type;
> + int prev_chg_type;
> + int prev_gnd_type;
> +
> + bool irq_adc;
> + bool irq_chg;
> + bool init_done;

I don't want to use the 'init_don' field. I think it is legacy way
to solve some issue. I recommend you use other way.

> +};
> +
> +struct max77843_muic_irq {
> + unsigned int irq;
> + const char *name;
> + unsigned int virq;
> +};
> +
> +static const struct regmap_config max77843_muic_regmap_config = {
> + .reg_bits = 8,
> + .val_bits = 8,
> + .max_register = MAX77843_MUIC_REG_END,
> +};
> +
> +static const struct regmap_irq max77843_muic_irq[] = {
> + /* MUIC:INT1 interrupts */

Don' need 'MUIC:' prefix and fix string (s/interrupts/interrupt).

> + { .reg_offset = 0, .mask = MAX77843_MUIC_ADC, },
> + { .reg_offset = 0, .mask = MAX77843_MUIC_ADCERROR, },
> + { .reg_offset = 0, .mask = MAX77843_MUIC_ADC1K, },
> +
> + /* MUIC:INT2 interrupts */

ditto.

> + { .reg_offset = 1, .mask = MAX77843_MUIC_CHGTYP, },
> + { .reg_offset = 1, .mask = MAX77843_MUIC_CHGDETRUN, },
> + { .reg_offset = 1, .mask = MAX77843_MUIC_DCDTMR, },
> + { .reg_offset = 1, .mask = MAX77843_MUIC_DXOVP, },
> + { .reg_offset = 1, .mask = MAX77843_MUIC_VBVOLT, },
> +
> + /* MUIC:INT3 interrupts */

ditto.

> + { .reg_offset = 2, .mask = MAX77843_MUIC_VBADC, },
> + { .reg_offset = 2, .mask = MAX77843_MUIC_VDNMON, },
> + { .reg_offset = 2, .mask = MAX77843_MUIC_DNRES, },
> + { .reg_offset = 2, .mask = MAX77843_MUIC_MPNACK, },
> + { .reg_offset = 2, .mask = MAX77843_MUIC_MRXBUFOW, },
> + { .reg_offset = 2, .mask = MAX77843_MUIC_MRXTRF, },
> + { .reg_offset = 2, .mask = MAX77843_MUIC_MRXPERR, },
> + { .reg_offset = 2, .mask = MAX77843_MUIC_MRXRDY, },
> +};
> +
> +static const struct regmap_irq_chip max77843_muic_irq_chip = {
> + .name = "max77843-muic",
> + .status_base = MAX77843_MUIC_REG_INT1,
> + .mask_base = MAX77843_MUIC_REG_INTMASK1,
> + .mask_invert = true,
> + .num_regs = 3,
> + .irqs = max77843_muic_irq,
> + .num_irqs = ARRAY_SIZE(max77843_muic_irq),
> +};
> +
> +static const char *max77843_extcon_cable[] = {
> + [EXTCON_CABLE_USB] = "USB",
> + [EXTCON_CABLE_USB_HOST] = "USB-HOST",
> + [EXTCON_CABLE_USB_HOST_TA] = "USB-HOST-TA",
> + [EXTCON_CABLE_TA] = "TA",
> + [EXTCON_CABLE_FAST_CHARGER] = "FAST-CHARGER",
> + [EXTCON_CABLE_SLOW_CHARGER] = "SLOW-CHARGER",
> + [EXTCON_CABLE_CHARGE_DOWNSTREAM] = "CHARGER-DOWNSTREAM",
> + [EXTCON_CABLE_MHL] = "MHL",
> + [EXTCON_CABLE_MHL_TA] = "MHL-TA",
> + [EXTCON_CABLE_JIG_USB_ON] = "JIG-USB-ON",
> + [EXTCON_CABLE_JIG_USB_OFF] = "JIG-USB-OFF",
> + [EXTCON_CABLE_JIG_UART_OFF] = "JIG-UART-OFF",
> + [EXTCON_CABLE_JIG_UART_ON] = "JIG-UART-ON",
> +};
> +
> +static struct max77843_muic_irq max77843_muic_irqs[] = {
> + { MAX77843_MUIC_IRQ_INT1_ADC, "MUIC-ADC" },
> + { MAX77843_MUIC_IRQ_INT1_ADCERROR, "MUIC-ADC_ERROR" },
> + { MAX77843_MUIC_IRQ_INT1_ADC1K, "MUIC-ADC1K" },
> + { MAX77843_MUIC_IRQ_INT2_CHGTYP, "MUIC-CHGTYP" },
> + { MAX77843_MUIC_IRQ_INT2_CHGDETRUN, "MUIC-CHGDETRUN" },
> + { MAX77843_MUIC_IRQ_INT2_DCDTMR, "MUIC-DCDTMR" },
> + { MAX77843_MUIC_IRQ_INT2_DXOVP, "MUIC-DXOVP" },
> + { MAX77843_MUIC_IRQ_INT2_VBVOLT, "MUIC-VBVOLT" },
> + { MAX77843_MUIC_IRQ_INT3_VBADC, "MUIC-VBADC" },
> + { MAX77843_MUIC_IRQ_INT3_VDNMON, "MUIC-VDNMON" },
> + { MAX77843_MUIC_IRQ_INT3_DNRES, "MUIC-DNRES" },
> + { MAX77843_MUIC_IRQ_INT3_MPNACK, "MUIC-MPNACK"},
> + { MAX77843_MUIC_IRQ_INT3_MRXBUFOW, "MUIC-MRXBUFOW"},
> + { MAX77843_MUIC_IRQ_INT3_MRXTRF, "MUIC-MRXTRF"},
> + { MAX77843_MUIC_IRQ_INT3_MRXPERR, "MUIC-MRXPERR"},
> + { MAX77843_MUIC_IRQ_INT3_MRXRDY, "MUIC-MRXRDY"},
> +};
> +
> +static int max77843_muic_set_path(struct max77843_muic_info *info,
> + u8 val, bool attached)
> +{
> + struct max77843 *max77843 = info->max77843;
> + int ret = 0;
> + unsigned int ctrl1, ctrl2;
> +
> + if (attached)
> + ctrl1 = val;
> + else
> + ctrl1 = MAX77843_SWITCH_OPEN;

'SWITCH' keyword is right?
I can't the 'SWITCH' word in CONTROL1 register of MAX77843 MUIC datasheet.
When you define the field for register, I prefer to use the word which
expressed in register map of datasheet.

> +
> + ret = regmap_update_bits(max77843->regmap_muic,
> + MAX77843_MUIC_REG_CONTROL1,
> + MAX77843_SIWTH_PORT, ctrl1);
> + if (ret < 0) {
> + dev_err(info->dev, "Cannot switch MUIC port\n");
> + return ret;
> + }
> +
> + if (attached)
> + ctrl2 = MAX77843_MUIC_CONTROL2_CPEN_MASK;
> + else
> + ctrl2 = MAX77843_MUIC_CONTROL2_LOWPWR_MASK;
> +
> + ret = regmap_update_bits(max77843->regmap_muic,
> + MAX77843_MUIC_REG_CONTROL2,
> + MAX77843_MUIC_CONTROL2_LOWPWR_MASK |
> + MAX77843_MUIC_CONTROL2_CPEN_MASK, ctrl2);
> + if (ret < 0) {
> + dev_err(info->dev, "Cannot update lowpower mode\n");
> + return ret;
> + }
> +
> + dev_dbg(info->dev,
> + "CONTROL1 : 0x%02x, CONTROL2 : 0x%02x, state : %s\n",
> + ctrl1, ctrl2, attached ? "attached" : "detached");
> +
> + return 0;
> +}
> +
> +static int max77843_muic_get_cable_type(struct max77843_muic_info *info,
> + enum max77843_muic_cable_group group, bool *attached)
> +{
> + int adc, chg_type, cable_type, gnd_type;
> +
> + adc = info->status[MAX77843_MUIC_STATUS1] &
> + MAX77843_MUIC_STATUS1_ADC_MASK;

If you use the short definition for 'MAX77843_MUIC_STATUS1',
you could make this code on one line.

> + adc >>= STATUS1_ADC_SHIFT;
> +
> + switch (group) {
> + case MAX77843_CABLE_GROUP_ADC:
> + if (adc == MAX77843_MUIC_ADC_OPEN) {
> + *attached = false;
> + cable_type = info->prev_cable_type;
> + info->prev_cable_type = MAX77843_MUIC_ADC_OPEN;
> + } else {
> + *attached = true;
> + cable_type = info->prev_cable_type = adc;
> + }
> +
> + break;
> + case MAX77843_CABLE_GROUP_CHG:
> + if (adc == MAX77843_MUIC_ADC_GROUND) {
> + *attached = true;
> + cable_type = adc;
> + break;
> + }
> +
> + chg_type = info->status[MAX77843_MUIC_STATUS2] &
> + MAX77843_MUIC_STATUS2_CHGTYP_MASK;

ditto and I think you need one more indentation for readabiltiy.


> + chg_type >>= STATUS2_CHGTYP_SHIFT;
> +

Remove unneeded blank line.

> + if (chg_type == MAX77843_CHG_TYPE_NONE) {
> + *attached = false;
> + cable_type = info->prev_chg_type;
> + info->prev_chg_type = MAX77843_CHG_TYPE_NONE;
> + } else {
> + *attached = true;
> + cable_type = info->prev_chg_type = chg_type;
> + }
> +
> + break;
> + case MAX77843_CABLE_GROUP_GND:
> + adc = info->status[MAX77843_MUIC_STATUS1] &
> + MAX77843_MUIC_STATUS1_ADC_MASK;

ditto.

> + adc >>= STATUS1_ADC_SHIFT;
> +
> + if (adc == MAX77843_MUIC_ADC_GROUND) {
> + *attached = true;
> + gnd_type = (info->status[MAX77843_MUIC_STATUS1] &
> + MAX77843_MUIC_STATUS1_ADC1K_MASK) >>
> + (STATUS1_ADC1K_SHIFT-1);
> + gnd_type |= (info->status[MAX77843_MUIC_STATUS2] &
> + MAX77843_MUIC_STATUS2_VBVOLT_MASK) >>
> + STATUS2_VBVOLT_SHIFT;
> + cable_type = info->prev_gnd_type = gnd_type;
> + } else {
> + *attached = false;
> + cable_type = info->prev_gnd_type;
> + info->prev_gnd_type = MAX77843_MUIC_GND_NUM;
> + }
> +
> + break;
> + default:
> + dev_err(info->dev, "Unknown cable group (%d)\n", group);
> + cable_type = -EINVAL;
> +
> + break;
> + }
> +
> + return cable_type;
> +}
> +
> +static int max77843_muic_adc_gnd_handler(struct max77843_muic_info *info)
> +{
> + int ret, gnd_cable_type;
> + u8 path;
> + bool attached;
> +
> + gnd_cable_type = max77843_muic_get_cable_type(info,
> + MAX77843_CABLE_GROUP_GND, &attached);
> + dev_dbg(info->dev, "external connector is %s (gnd:0x%02x)\n",
> + attached ? "attached" : "detached", gnd_cable_type);
> +
> + switch (gnd_cable_type) {
> + case MAX77843_MUIC_GND_USB_OTG:
> + extcon_set_cable_state(info->edev, "USB-HOST", attached);
> + path = MAX77843_SWITCH_USB;

Change the name insted of 'SWITCH' word.

Also, I think you have to change the path before sending uevent about cable information.
If you set cable state before setting the path, user-process might get the uevent
before changing the MUIC path. You have to modify it when cable state is changed.

> + info->irq_chg = false;
> + break;
> + case MAX77843_MUIC_GND_USB_OTG_VB:
> + extcon_set_cable_state(info->edev, "USB-HOST-TA", attached);
> + path = MAX77843_SWITCH_USB;

ditto.

> + info->irq_chg = false;
> + break;
> + case MAX77843_MUIC_GND_MHL:
> + extcon_set_cable_state(info->edev, "MHL", attached);
> + path = MAX77843_SWITCH_OPEN;

ditto.

> + info->irq_chg = false;
> + break;
> + case MAX77843_MUIC_GND_MHL_VB:
> + extcon_set_cable_state(info->edev, "MHL-TA", attached);
> + path = MAX77843_SWITCH_OPEN;

ditto.

> + info->irq_chg = false;
> + break;
> + default:
> + dev_err(info->dev, "Cannot detect %s cable of gnd type\n",
> + attached ? "attached" : "detached");
> + return -EINVAL;
> + }
> +
> + ret = max77843_muic_set_path(info, path, attached);
> + if (ret < 0)
> + return ret;
> +
> + return 0;
> +}
> +
> +static int max77843_muic_jig_handler(struct max77843_muic_info *info,
> + int cable_type, bool attached)
> +{
> + char cable_name[32];

Remove 'cable_name' array

> + u8 path = MAX77843_SWITCH_OPEN;
> + int ret;
> +
> + dev_dbg(info->dev, "external connector is %s (adc:0x%02x)\n",
> + attached ? "attached" : "detached", cable_type);
> +
> + switch (cable_type) {
> + case MAX77843_MUIC_ADC_FACTORY_MODE_USB_OFF:
> + strcpy(cable_name, "JIG-USB-OFF");

You execute direclty extcon_set_cable_state() function instead of using strcpy.

> + path = MAX77843_SWITCH_USB;
> + break;
> + case MAX77843_MUIC_ADC_FACTORY_MODE_USB_ON:
> + strcpy(cable_name, "JIG-USB-ON");
> + path = MAX77843_SWITCH_USB;
> + break;
> + case MAX77843_MUIC_ADC_FACTORY_MODE_UART_OFF:
> + strcpy(cable_name, "JIG-UART-OFF");
> + path = MAX77843_SWITCH_UART;
> + break;
> + default:
> + break;
> + }
> +
> + ret = max77843_muic_set_path(info, path, attached);
> + if (ret < 0)
> + return ret;
> +
> + extcon_set_cable_state(info->edev, cable_name, attached);
> +
> + return 0;
> +}
> +
> +static int max77843_muic_adc_handler(struct max77843_muic_info *info)
> +{
> + int ret, cable_type;
> + bool attached;
> +
> + cable_type = max77843_muic_get_cable_type(info,
> + MAX77843_CABLE_GROUP_ADC, &attached);
> +
> + dev_dbg(info->dev,
> + "external connector is %s (adc:0x%02x, prev_adc:0x%x)\n",
> + attached ? "attached" : "detached", cable_type,
> + info->prev_cable_type);
> +
> + switch (cable_type) {
> + case MAX77843_MUIC_ADC_GROUND:
> + ret = max77843_muic_adc_gnd_handler(info);
> + if (ret < 0)
> + return ret;
> + break;
> + case MAX77843_MUIC_ADC_FACTORY_MODE_USB_OFF:
> + case MAX77843_MUIC_ADC_FACTORY_MODE_USB_ON:
> + case MAX77843_MUIC_ADC_FACTORY_MODE_UART_OFF:
> + ret = max77843_muic_jig_handler(info, cable_type, attached);
> + if (ret < 0)
> + return ret;
> + break;
> + case MAX77843_MUIC_ADC_SEND_END_BUTTON:
> + case MAX77843_MUIC_ADC_REMOTE_S1_BUTTON:
> + case MAX77843_MUIC_ADC_REMOTE_S2_BUTTON:
> + case MAX77843_MUIC_ADC_REMOTE_S3_BUTTON:
> + case MAX77843_MUIC_ADC_REMOTE_S4_BUTTON:
> + case MAX77843_MUIC_ADC_REMOTE_S5_BUTTON:
> + case MAX77843_MUIC_ADC_REMOTE_S6_BUTTON:
> + case MAX77843_MUIC_ADC_REMOTE_S7_BUTTON:
> + case MAX77843_MUIC_ADC_REMOTE_S8_BUTTON:
> + case MAX77843_MUIC_ADC_REMOTE_S9_BUTTON:
> + case MAX77843_MUIC_ADC_REMOTE_S10_BUTTON:
> + case MAX77843_MUIC_ADC_REMOTE_S11_BUTTON:
> + case MAX77843_MUIC_ADC_REMOTE_S12_BUTTON:
> + case MAX77843_MUIC_ADC_RESERVED_ACC_1:
> + case MAX77843_MUIC_ADC_RESERVED_ACC_2:
> + case MAX77843_MUIC_ADC_RESERVED_ACC_3:
> + case MAX77843_MUIC_ADC_RESERVED_ACC_4:
> + case MAX77843_MUIC_ADC_RESERVED_ACC_5:
> + case MAX77843_MUIC_ADC_AUDIO_DEVICE_TYPE2:
> + case MAX77843_MUIC_ADC_PHONE_POWERED_DEV:
> + case MAX77843_MUIC_ADC_TTY_CONVERTER:
> + case MAX77843_MUIC_ADC_UART_CABLE:
> + case MAX77843_MUIC_ADC_CEA936A_TYPE1_CHG:
> + case MAX77843_MUIC_ADC_AV_CABLE_NOLOAD:
> + case MAX77843_MUIC_ADC_CEA936A_TYPE2_CHG:
> + case MAX77843_MUIC_ADC_FACTORY_MODE_UART_ON:
> + case MAX77843_MUIC_ADC_AUDIO_DEVICE_TYPE1:
> + case MAX77843_MUIC_ADC_OPEN:
> + dev_err(info->dev,
> + "accessory is %s but it isn't used (adc:0x%x)\n",
> + attached ? "attached" : "detached", cable_type);
> + return -EAGAIN;
> + default:
> + dev_err(info->dev,
> + "failed to detect %s accessory (adc:0x%x)\n",
> + attached ? "attached" : "detached", cable_type);
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> +static int max77843_muic_chg_handler(struct max77843_muic_info *info)
> +{
> + int ret, chg_type;
> + bool attached;
> + u8 path = MAX77843_SWITCH_OPEN;

ditto.

> +
> + chg_type = max77843_muic_get_cable_type(info,
> + MAX77843_CABLE_GROUP_CHG, &attached);
> +
> + dev_dbg(info->dev,
> + "external connector is %s(chg_type:0x%x, prev_chg_type:0x%x)\n",
> + attached ? "attached" : "detached",
> + chg_type, info->prev_chg_type);
> +
> + switch (chg_type) {
> + case MAX77843_CHG_TYPE_USB:
> + path = MAX77843_SWITCH_USB;
> + extcon_set_cable_state(info->edev, "USB", attached);

ditto. you have to change the muic path before setting the cable state.

> + break;
> + case MAX77843_CHG_TYPE_DOWNSTREAM:
> + path = MAX77843_SWITCH_OPEN;
> + extcon_set_cable_state(info->edev,
> + "CHARGER-DOWNSTREAM", attached);
> + break;
> + case MAX77843_CHG_TYPE_DEDICATED:
> + path = MAX77843_SWITCH_OPEN;
> + extcon_set_cable_state(info->edev, "TA", attached);
> + break;
> + case MAX77843_CHG_TYPE_SPECIAL_500MA:
> + path = MAX77843_SWITCH_OPEN;
> + extcon_set_cable_state(info->edev, "SLOW-CHAREGER", attached);
> + break;
> + case MAX77843_CHG_TYPE_SPECIAL_1A:
> + path = MAX77843_SWITCH_OPEN;
> + extcon_set_cable_state(info->edev, "FAST-CHARGER", attached);
> + break;
> + case MAX77843_CHG_TYPE_SPECIAL_BIAS:
> + path = MAX77843_SWITCH_OPEN;
> + break;
> + case MAX77843_CHG_TYPE_NONE:
> + return 0;
> + default:
> + dev_err(info->dev,
> + "failed to detect %s accessory (chg_type:0x%x)\n",
> + attached ? "attached" : "detached", chg_type);
> + return -EINVAL;
> + }
> +
> + ret = max77843_muic_set_path(info, path, attached);
> + if (ret < 0)
> + return ret;
> +
> + return 0;
> +}
> +
> +static void max77843_muic_irq_work(struct work_struct *work)
> +{
> + struct max77843_muic_info *info = container_of(work,
> + struct max77843_muic_info, irq_work);
> + struct max77843 *max77843 = info->max77843;
> + int ret = 0;
> +
> + if (!info->edev)
> + return;
> +
> + mutex_lock(&info->mutex);
> +
> + ret = regmap_bulk_read(max77843->regmap_muic,
> + MAX77843_MUIC_REG_STATUS1, info->status,
> + MAX77843_MUIC_STATUS_NUM);
> + if (ret) {
> + dev_err(info->dev, "Cannot read STATUS registers\n");
> + mutex_unlock(&info->mutex);
> + return;
> + }
> +
> + if (info->irq_adc) {
> + ret = max77843_muic_adc_handler(info);
> + if (ret)
> + dev_err(info->dev, "Unknown cable type\n");
> + info->irq_adc = false;
> + }
> +
> + if (info->irq_chg) {
> + ret = max77843_muic_chg_handler(info);
> + if (ret)
> + dev_err(info->dev, "Unknown charger type\n");
> + info->irq_chg = false;
> + }
> +
> + mutex_unlock(&info->mutex);
> +}
> +
> +static irqreturn_t max77843_muic_irq_handler(int irq, void *data)
> +{
> + struct max77843_muic_info *info = data;
> + int i, irq_type = -1;
> +
> + if (!info->init_done)
> + return IRQ_HANDLED;
> +
> + for (i = 0; i < ARRAY_SIZE(max77843_muic_irqs); i++)
> + if (irq == info->muic_irqs[i].virq)
> + irq_type = info->muic_irqs[i].irq;
> +
> + switch (irq_type) {
> + case MAX77843_MUIC_IRQ_INT1_ADC:
> + case MAX77843_MUIC_IRQ_INT1_ADCERROR:
> + case MAX77843_MUIC_IRQ_INT1_ADC1K:
> + info->irq_adc = true;
> + break;
> + case MAX77843_MUIC_IRQ_INT2_CHGTYP:
> + case MAX77843_MUIC_IRQ_INT2_CHGDETRUN:
> + case MAX77843_MUIC_IRQ_INT2_DCDTMR:
> + case MAX77843_MUIC_IRQ_INT2_DXOVP:
> + case MAX77843_MUIC_IRQ_INT2_VBVOLT:
> + info->irq_chg = true;
> + break;
> + case MAX77843_MUIC_IRQ_INT3_VBADC:
> + case MAX77843_MUIC_IRQ_INT3_VDNMON:
> + case MAX77843_MUIC_IRQ_INT3_DNRES:
> + case MAX77843_MUIC_IRQ_INT3_MPNACK:
> + case MAX77843_MUIC_IRQ_INT3_MRXBUFOW:
> + case MAX77843_MUIC_IRQ_INT3_MRXTRF:
> + case MAX77843_MUIC_IRQ_INT3_MRXPERR:
> + case MAX77843_MUIC_IRQ_INT3_MRXRDY:
> + break;
> + default:
> + dev_err(info->dev, "Cannot recognize IRQ(%d)\n", irq_type);
> + break;
> + }
> +
> + schedule_work(&info->irq_work);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static void max77843_muic_detect_cable_wq(struct work_struct *work)
> +{
> + struct max77843_muic_info *info = container_of(to_delayed_work(work),
> + struct max77843_muic_info, wq_detcable);
> + struct max77843 *max77843 = info->max77843;
> + int chg_type, adc, ret;
> + bool attached;
> +
> + mutex_lock(&info->mutex);
> +
> + ret = regmap_bulk_read(max77843->regmap_muic,
> + MAX77843_MUIC_REG_STATUS1, info->status,
> + MAX77843_MUIC_STATUS_NUM);
> + if (ret) {
> + dev_err(info->dev, "Cannot read STATUS registers\n");
> + goto err_cable_wq;
> + }
> +
> + adc = max77843_muic_get_cable_type(info,
> + MAX77843_CABLE_GROUP_ADC, &attached);
> + if (attached && adc != MAX77843_MUIC_ADC_OPEN) {
> + ret = max77843_muic_adc_handler(info);
> + if (ret < 0) {
> + dev_err(info->dev, "Cannot detect accessory\n");
> + goto err_cable_wq;
> + }
> + }
> +
> + chg_type = max77843_muic_get_cable_type(info,
> + MAX77843_CABLE_GROUP_CHG, &attached);
> + if (attached && chg_type != MAX77843_CHG_TYPE_NONE) {
> + ret = max77843_muic_chg_handler(info);
> + if (ret < 0) {
> + dev_err(info->dev, "Cannot detect charger accessory\n");
> + goto err_cable_wq;
> + }
> + }
> +
> +err_cable_wq:
> + mutex_unlock(&info->mutex);
> +}
> +
> +static int max77843_muic_set_debounce_time(struct max77843_muic_info *info,
> + enum max77843_muic_adv_debounce_time time)
> +{
> + struct max77843 *max77843 = info->max77843;
> + unsigned int ret;
> +
> + switch (time) {
> + case MAX77843_DEBOUNCE_TIME_5MS:
> + case MAX77843_DEBOUNCE_TIME_10MS:
> + case MAX77843_DEBOUNCE_TIME_25MS:
> + case MAX77843_DEBOUNCE_TIME_38_62MS:
> + ret = regmap_update_bits(max77843->regmap_muic,
> + MAX77843_MUIC_REG_CONTROL4,
> + MAX77843_MUIC_CONTROL4_ADCDBSET_MASK,
> + time << CONTROL4_ADCDBSET_SHIFT);
> + if (ret) {

I prfer to use following condition statement to check return value
if (ret) -> if (ret < 0)

> + dev_err(info->dev, "Cannot write MUIC regmap\n");
> + return ret;
> + }
> +
> + break;
> + default:
> + dev_err(info->dev, "Invalid ADC debounce time\n");
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> +static int max77843_init_muic_regmap(struct max77843 *max77843)
> +{
> + int ret;
> +
> + max77843->i2c_muic = i2c_new_dummy(max77843->i2c->adapter,
> + I2C_ADDR_MUIC);
> + if (!max77843->i2c_muic) {
> + dev_err(&max77843->i2c->dev,
> + "Cannot allocate I2C device for MUIC\n");
> + return PTR_ERR(max77843->i2c_muic);
> + }
> +
> + i2c_set_clientdata(max77843->i2c_muic, max77843);
> +
> + max77843->regmap_muic = devm_regmap_init_i2c(max77843->i2c_muic,
> + &max77843_muic_regmap_config);
> + if (IS_ERR(max77843->regmap_muic)) {
> + ret = PTR_ERR(max77843->regmap_muic);
> + goto err_muic_i2c;
> + }
> +
> + ret = regmap_add_irq_chip(max77843->regmap_muic, max77843->irq,
> + IRQF_TRIGGER_LOW | IRQF_ONESHOT | IRQF_SHARED,
> + 0, &max77843_muic_irq_chip, &max77843->irq_data_muic);
> + if (ret) {

ditto.
if (ret < 0)

> + dev_err(&max77843->i2c->dev, "Cannot add MUIC IRQ chip\n");
> + goto err_muic_i2c;
> + }
> +
> + return 0;
> +
> +err_muic_i2c:
> + i2c_unregister_device(max77843->i2c_muic);
> +
> + return ret;
> +}
> +
> +static int max77843_muic_probe(struct platform_device *pdev)
> +{
> + struct max77843 *max77843 = dev_get_drvdata(pdev->dev.parent);
> + struct max77843_muic_info *info;
> + unsigned int id;
> + int i, ret;
> +
> + info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
> + if (!info)
> + return -ENOMEM;
> +
> + info->dev = &pdev->dev;
> + info->max77843 = max77843;
> + info->muic_irqs = max77843_muic_irqs;
> + info->init_done = false;
> +
> + platform_set_drvdata(pdev, info);
> + mutex_init(&info->mutex);
> + INIT_WORK(&info->irq_work, max77843_muic_irq_work);
> +
> + /* Initialize i2c and regmap */
> + ret = max77843_init_muic_regmap(max77843);
> + if (ret) {
> + dev_err(&pdev->dev, "Failed to init MUIC regmap\n");
> + return ret;
> + }
> +
> + /* Turn off auto detection configuration */
> + ret = regmap_update_bits(max77843->regmap_muic,
> + MAX77843_MUIC_REG_CONTROL4,
> + MAX77843_MUIC_CONTROL4_USBAUTO_MASK |
> + MAX77843_MUIC_CONTROL4_FCTAUTO_MASK,
> + MAX77843_MUIC_AUTO_NONE << CONTROL4_USBAUTO_SHIFT);
> +
> + /* Support virtual irq domain for max77843 MUIC device */
> + for (i = 0; i < ARRAY_SIZE(max77843_muic_irqs); i++) {
> + struct max77843_muic_irq *muic_irq = &info->muic_irqs[i];
> + unsigned int virq = 0;
> +
> + virq = regmap_irq_get_virq(max77843->irq_data_muic,
> + muic_irq->irq);
> + if (virq <= 0) {
> + ret = -EINVAL;
> + goto err_muic_irq;
> + }
> + muic_irq->virq = virq;
> +
> + ret = devm_request_threaded_irq(&pdev->dev, virq, NULL,
> + max77843_muic_irq_handler, IRQF_NO_SUSPEND,
> + muic_irq->name, info);
> + if (ret) {
> + dev_err(&pdev->dev,
> + "Failed: irq request (IRQ: %d, error: %d)\n",
> + muic_irq->irq, ret);
> + goto err_muic_irq;
> + }
> + }
> +
> + /* Initialize extcon device */
> + info->edev = devm_extcon_dev_allocate(&pdev->dev,
> + max77843_extcon_cable);
> + if (IS_ERR(info->edev)) {
> + dev_err(&pdev->dev, "Failed to allocate memory for extcon\n");
> + ret = -ENODEV;
> + goto err_muic_irq;
> + }
> +
> + info->edev->name = dev_name(&pdev->dev);

Don't need it. extcon_dev_register() set the name of extcon device.

> +
> + ret = devm_extcon_dev_register(&pdev->dev, info->edev);
> + if (ret) {
> + dev_err(&pdev->dev, "Failed to register extcon device\n");
> + goto err_muic_irq;
> + }
> +
> + /* Set ADC debounce time */
> + max77843_muic_set_debounce_time(info, MAX77843_DEBOUNCE_TIME_25MS);
> +
> + /* Set initial path for UART */
> + max77843_muic_set_path(info, MAX77843_SWITCH_UART, true);
> +
> + /* Detect accessory after completing the initialization of platform */
> + INIT_DELAYED_WORK(&info->wq_detcable, max77843_muic_detect_cable_wq);
> + queue_delayed_work(system_power_efficient_wq,
> + &info->wq_detcable, msecs_to_jiffies(DELAY_MS_DEFAULT));
> +
> + /* Check revision number of MUIC device */
> + ret = regmap_read(max77843->regmap_muic, MAX77843_MUIC_REG_ID, &id);
> + if (ret < 0) {
> + dev_err(&pdev->dev, "Failed to read revision number\n");
> + return ret;
> + }
> + dev_info(info->dev, "MUIC device ID : 0x%x\n", id);
> +
> + info->init_done = true;
> +
> + return 0;
> +
> +err_muic_irq:
> + regmap_del_irq_chip(max77843->irq, max77843->irq_data_muic);
> +
> + return ret;
> +}
> +
> +static int max77843_muic_remove(struct platform_device *pdev)
> +{
> + struct max77843_muic_info *info = platform_get_drvdata(pdev);
> +
> + cancel_work_sync(&info->irq_work);
> +
> + return 0;
> +}
> +
> +static const struct platform_device_id max77843_muic_id[] = {
> + { "max77843-muic", },
> + { },
> +};
> +MODULE_DEVICE_TABLE(platform, max77843_muic_id);
> +
> +static struct platform_driver max77843_muic_driver = {
> + .driver = {
> + .name = "max77843-muic",
> + },
> + .probe = max77843_muic_probe,
> + .remove = max77843_muic_remove,
> + .id_table = max77843_muic_id,
> +};
> +
> +static int __init max77843_muic_init(void)
> +{
> + return platform_driver_register(&max77843_muic_driver);
> +}
> +subsys_initcall(max77843_muic_init);
> +
> +MODULE_DESCRIPTION("Maxim MAX77843 Extcon driver");
> +MODULE_AUTHOR("Jaewon Kim <jaewon02.kim@samsung.com>");
> +MODULE_LICENSE("GPL");
>

Thanks,
Chanwoo Choi



\
 
 \ /
  Last update: 2015-01-23 08:01    [W:0.366 / U:0.348 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site