lkml.org 
[lkml]   [2015]   [Jan]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 1/6] mfd: max77843: Add max77843 MFD driver core driver
From
Date
On pią, 2015-01-23 at 15:55 +0900, Jaewon Kim wrote:
> Hi Krzysztof,
>
> 2015년 01월 23일 15:32에 Krzysztof Kozlowski 이(가) 쓴 글:
> > 2015-01-23 6:02 GMT+01:00 Jaewon Kim <jaewon02.kim@samsung.com>:
> >> This patch adds MAX77843 core/irq driver to support PMIC,
> >> MUIC(Micro USB Interface Controller), Charger, Fuel Gauge,
> >> LED and Haptic device.
> >>
> >> Cc: Lee Jones <lee.jones@linaro.org>
> >> Signed-off-by: Beomho Seo <beomho.seo@samsung.com>
> >> Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com>
> >> ---
> >> drivers/mfd/Kconfig | 14 ++
> >> drivers/mfd/Makefile | 1 +
> >> drivers/mfd/max77843.c | 241 ++++++++++++++++++++
> >> include/linux/mfd/max77843-private.h | 410 ++++++++++++++++++++++++++++++++++
> >> 4 files changed, 666 insertions(+)
> >> create mode 100644 drivers/mfd/max77843.c
> >> create mode 100644 include/linux/mfd/max77843-private.h
> >>
> >> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> >> index 2e6b731..0c67c79 100644
> >> --- a/drivers/mfd/Kconfig
> >> +++ b/drivers/mfd/Kconfig
> >> @@ -442,6 +442,20 @@ config MFD_MAX77693
> >> additional drivers must be enabled in order to use the functionality
> >> of the device.
> >>
> >> +config MFD_MAX77843
> >> + bool "Maxim Semiconductor MAX77843 PMIC Support"
> >> + depends on I2C=y
> >> + select MFD_CORE
> >> + select REGMAP_I2C
> >> + select REGMAP_IRQ
> >> + help
> >> + Say yes here to add support for Maxim Semiconductor MAX77843.
> >> + This is companion Power Management IC with LEDs, Haptic, Charger,
> >> + Fuel Gauge, MUIC(Micro USB Interface Controller) controls on chip.
> >> + This driver provides common support for accessing the device;
> >> + additional drivers must be enabled in order to use the functionality
> >> + of the device.
> >> +
> >> config MFD_MAX8907
> >> tristate "Maxim Semiconductor MAX8907 PMIC Support"
> >> select MFD_CORE
> >> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> >> index 53467e2..fe4f75c 100644
> >> --- a/drivers/mfd/Makefile
> >> +++ b/drivers/mfd/Makefile
> >> @@ -117,6 +117,7 @@ obj-$(CONFIG_MFD_DA9063) += da9063.o
> >> obj-$(CONFIG_MFD_MAX14577) += max14577.o
> >> obj-$(CONFIG_MFD_MAX77686) += max77686.o
> >> obj-$(CONFIG_MFD_MAX77693) += max77693.o
> >> +obj-$(CONFIG_MFD_MAX77843) += max77843.o
> >> obj-$(CONFIG_MFD_MAX8907) += max8907.o
> >> max8925-objs := max8925-core.o max8925-i2c.o
> >> obj-$(CONFIG_MFD_MAX8925) += max8925.o
> >> diff --git a/drivers/mfd/max77843.c b/drivers/mfd/max77843.c
> >> new file mode 100644
> >> index 0000000..d7f8b76
> >> --- /dev/null
> >> +++ b/drivers/mfd/max77843.c
> >> @@ -0,0 +1,241 @@
> >> +/*
> >> + * max77843.c - MFD core driver for the Maxim MAX77843
> >> + *
> >> + * Copyright (C) 2014 Samsung Electrnoics
> >> + * Author: Jaewon Kim <jaewon02.kim@samsung.com>
> >> + *
> >> + * This program is free software; you can redistribute it and/or modify
> >> + * it under the terms of the GNU General Public License as published by
> >> + * the Free Software Foundation; either version 2 of the License, or
> >> + * (at your option) any later version.
> >> + */
> >> +
> >> +#include <linux/err.h>
> >> +#include <linux/i2c.h>
> >> +#include <linux/init.h>
> >> +#include <linux/interrupt.h>
> >> +#include <linux/module.h>
> >> +#include <linux/mfd/core.h>
> >> +#include <linux/mfd/max77843-private.h>
> >> +#include <linux/of_device.h>
> >> +#include <linux/platform_device.h>
> >> +
> >> +static const struct mfd_cell max77843_devs[] = {
> >> + {
> >> + .name = "max77843-muic",
> >> + .of_compatible = "maxim,max77843-muic",
> >> + }, {
> >> + .name = "max77843-regulator",
> >> + .of_compatible = "maxim,max77843-regulator",
> >> + }, {
> >> + .name = "max77843-charger",
> >> + .of_compatible = "maxim,max77843-charger"
> >> + }, {
> >> + .name = "max77843-fuelgauge",
> >> + .of_compatible = "maxim,max77843-fuelgauge",
> >> + },
> >> +};
> >> +
> >> +static const struct regmap_config max77843_charger_regmap_config = {
> >> + .reg_bits = 8,
> >> + .val_bits = 8,
> >> + .max_register = MAX77843_CHG_REG_END,
> >> +};
> >> +
> >> +static const struct regmap_config max77843_regmap_config = {
> >> + .reg_bits = 8,
> >> + .val_bits = 8,
> >> + .max_register = MAX77843_SYS_REG_END,
> >> +};
> >> +
> >> +static const struct regmap_irq max77843_irqs[] = {
> >> + /* TOPSYS interrupts */
> >> + { .reg_offset = 0, .mask = MAX77843_SYS_IRQ_SYSUVLO_INT, },
> >> + { .reg_offset = 0, .mask = MAX77843_SYS_IRQ_SYSOVLO_INT, },
> >> + { .reg_offset = 0, .mask = MAX77843_SYS_IRQ_TSHDN_INT, },
> >> + { .reg_offset = 0, .mask = MAX77843_SYS_IRQ_TM_INT, },
> >> +};
> >> +
> >> +static const struct regmap_irq_chip max77843_irq_chip = {
> >> + .name = "max77843",
> >> + .status_base = MAX77843_SYS_REG_SYSINTSRC,
> >> + .mask_base = MAX77843_SYS_REG_SYSINTMASK,
> >> + .mask_invert = false,
> >> + .num_regs = 1,
> >> + .irqs = max77843_irqs,
> >> + .num_irqs = ARRAY_SIZE(max77843_irqs),
> >> +};
> >> +
> >> +static int max77843_chg_init(struct max77843 *max77843)
> >> +{
> > Could this function be moved to the charger driver? This way the
> > driver will manage its own resources instead of depending on parent
> > MFD driver.
> >
> >> + int ret;
> >> +
> >> + max77843->i2c_chg = i2c_new_dummy(max77843->i2c->adapter, I2C_ADDR_CHG);
> >> + if (!max77843->i2c_chg) {
> >> + dev_err(&max77843->i2c->dev,
> >> + "Cannot allocate I2C device for Charger\n");
> >> + return PTR_ERR(max77843->i2c_chg);
> >> + }
> >> + i2c_set_clientdata(max77843->i2c_chg, max77843);
> >> +
> >> + max77843->regmap_chg = devm_regmap_init_i2c(max77843->i2c_chg,
> >> + &max77843_charger_regmap_config);
> >> + if (IS_ERR(max77843->regmap_chg)) {
> >> + ret = PTR_ERR(max77843->regmap_chg);
> >> + goto err_chg_i2c;
> >> + }
> >> +
> >> + return 0;
> >> +
> >> +err_chg_i2c:
> >> + i2c_unregister_device(max77843->i2c_chg);
> >> +
> >> + return ret;
> >> +}
> >> +
> >> +static int max77843_probe(struct i2c_client *i2c,
> >> + const struct i2c_device_id *id)
> >> +{
> >> + struct max77843 *max77843;
> >> + int ret;
> >> + unsigned int reg_data;
> >> +
> >> + max77843 = devm_kzalloc(&i2c->dev, sizeof(*max77843), GFP_KERNEL);
> >> + if (!max77843)
> >> + return -ENOMEM;
> >> +
> >> + i2c_set_clientdata(i2c, max77843);
> >> + max77843->dev = &i2c->dev;
> >> + max77843->i2c = i2c;
> >> + max77843->irq = i2c->irq;
> >> +
> >> + max77843->regmap = devm_regmap_init_i2c(i2c,
> >> + &max77843_regmap_config);
> >> + if (IS_ERR(max77843->regmap)) {
> >> + dev_err(&i2c->dev, "Failed to allocate topsys register map\n");
> >> + return PTR_ERR(max77843->regmap);
> >> + }
> >> +
> >> + ret = regmap_add_irq_chip(max77843->regmap, max77843->irq,
> >> + IRQF_TRIGGER_LOW | IRQF_ONESHOT | IRQF_SHARED,
> >> + 0, &max77843_irq_chip, &max77843->irq_data);
> > Why shared IRQ?
>
> This IRQ shared with submodules.
> you can see another IRQ register process in extcon-max77843 driver.

Right, I found it later.

>
> >
> >> + if (ret) {
> >> + dev_err(&i2c->dev, "Failed to add TOPSYS IRQ chip\n");
> >> + return ret;
> >> + }
> >> +
> >> + ret = regmap_read(max77843->regmap,
> >> + MAX77843_SYS_REG_PMICID, &reg_data);
> >> + if (ret < 0) {
> >> + dev_err(&i2c->dev, "Failed to read PMIC ID\n");
> >> + goto err_pmic_id;
> >> + }
> >> + dev_info(&i2c->dev, "device ID: 0x%x\n", reg_data);
> >> +
> >> + ret = max77843_chg_init(max77843);
> >> + if (ret) {
> >> + dev_err(&i2c->dev, "Failed to init Charger\n");
> >> + goto err_pmic_id;
> >> + }
> >> +
> >> + ret = regmap_update_bits(max77843->regmap,
> >> + MAX77843_SYS_REG_INTSRCMASK,
> >> + MAX77843_INTSRC_MASK_MASK,
> >> + (unsigned int)~MAX77843_INTSRC_MASK_MASK);
> >> + if (ret < 0) {
> >> + dev_err(&i2c->dev, "Failed to unmask interrupt sourece\n");
> > s/sourece/source/
>
> I will fix typo in next version.
>
> >
> > Best regards,
> > Krzysztof
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-pm" in
> > the body of a message to majordomo@vger.kernel.org
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
> >
>
> Thanks to review my patch.
> Jaewon Kim



\
 
 \ /
  Last update: 2015-01-23 08:21    [W:0.079 / U:1.368 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site