lkml.org 
[lkml]   [2014]   [Sep]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 0/4] Add picoPHY usb phy driver found on stih407 family SoC's
Date
This series adds support for the picoPHY usb phy which is used by the usb2
and usb3 host controllers when controlling usb2/1.1 devices. It is found on
stih407 family SoC's from the consumer electronics devision of STMicroelectronics.

Changes since v1:
- Remove reference to stih410 in dt documentation
- Fix alignment issue in dt example
- usbpicophy@f8 since you have a reg property

Peter Griffin (4):
phy: phy-stih407-usb: Add usb picoPHY driver found on stih407 SoC
family
phy: phy-stih407-usb: Add dt documentation for USB picophy found on
stih407 SoC family
MAINTAINERS: Add phy-stih407-usb.c file to ARCH/STI architecture
ARM: multi_v7_defconfig: Enable stih407 usb picophy

.../devicetree/bindings/phy/phy-stih407-usb.txt | 30 ++++
MAINTAINERS | 1 +
arch/arm/configs/multi_v7_defconfig | 1 +
drivers/phy/Kconfig | 8 +
drivers/phy/Makefile | 2 +
drivers/phy/phy-stih407-usb.c | 185 +++++++++++++++++++++
6 files changed, 227 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/phy-stih407-usb.txt
create mode 100644 drivers/phy/phy-stih407-usb.c

--
1.9.1



\
 
 \ /
  Last update: 2014-09-09 11:41    [W:0.057 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site