lkml.org 
[lkml]   [2014]   [Sep]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[GIT PULL] at91: drivers for 3.18 #2
Date
Arnd, Olof, Kevin,

This pull-request is focused on the work that Maxime did for migrating our timer
(PIT) to the clocksource sub-system. A big cleanup happened which allows us to
be even closer to the point when we have only the bare minimum in our formerly
crowded mach-at91 directory.

This pull-request goes on top of the "drivers" one already sent to you on Sept.
01st.

Thanks, best regards,

The following changes since commit 405a72c5e78b5c560c8b2711d4000fa5eb063e1b:

power: reset: at91-poweroff: fix wakeup status register index (2014-09-01 18:40:44 +0200)

are available in the git repository at:

git://github.com/at91linux/linux-at91.git tags/at91-drivers2

for you to fetch changes up to 5c1406f573f0f13b85c738a21030aadc9bb36bdd:

ARM: at91: PIT: Move the driver to drivers/clocksource (2014-09-03 10:55:46 +0200)

----------------------------------------------------------------
Second drivers series for AT91/3.18:
- move of the PIT (basic timer) from mach-at91 to its
proper location: drivers/clocksource
- big cleanup of this driver along the way

----------------------------------------------------------------
Maxime Ripard (14):
ARM: at91: PIT: Follow the general coding rules
ARM: at91: generic.h: Add include safe guards
ARM: at91: PIT: Use DIV_ROUND_CLOSEST to compute the cycles
ARM: at91: PIT: Use of_have_populated_dt instead of CONFIG_OF
ARM: at91: PIT: Rework probe functions
ARM: at91: dt: Remove init_time definitions
ARM: at91: PIT: Use consistent exit path in probe
ARM: at91: PIT: Use pr_fmt
ARM: at91: PIT: use request_irq instead of setup_irq
ARM: at91: PIT: (Almost) remove the global variables
ARM: at91: soc: Add init_time callback
ARM: at91: Convert the boards to the init_time callback
ARM: at91: PIT: Convert to an early_platform_device
ARM: at91: PIT: Move the driver to drivers/clocksource

arch/arm/mach-at91/Kconfig | 5 -
arch/arm/mach-at91/Makefile | 1 -
arch/arm/mach-at91/at91sam9260.c | 34 +++-
arch/arm/mach-at91/at91sam9261.c | 34 +++-
arch/arm/mach-at91/at91sam9263.c | 34 +++-
arch/arm/mach-at91/at91sam926x_time.c | 294 ------------------------------
arch/arm/mach-at91/at91sam9g45.c | 34 +++-
arch/arm/mach-at91/at91sam9rl.c | 34 +++-
arch/arm/mach-at91/board-afeb-9260v1.c | 2 +-
arch/arm/mach-at91/board-cam60.c | 2 +-
arch/arm/mach-at91/board-cpu9krea.c | 2 +-
arch/arm/mach-at91/board-dt-sam9.c | 10 --
arch/arm/mach-at91/board-dt-sama5.c | 9 -
arch/arm/mach-at91/board-flexibity.c | 2 +-
arch/arm/mach-at91/board-foxg20.c | 2 +-
arch/arm/mach-at91/board-gsia18s.c | 2 +-
arch/arm/mach-at91/board-pcontrol-g20.c | 2 +-
arch/arm/mach-at91/board-sam9-l9260.c | 2 +-
arch/arm/mach-at91/board-sam9260ek.c | 2 +-
arch/arm/mach-at91/board-sam9261ek.c | 4 +-
arch/arm/mach-at91/board-sam9263ek.c | 2 +-
arch/arm/mach-at91/board-sam9g20ek.c | 4 +-
arch/arm/mach-at91/board-sam9m10g45ek.c | 2 +-
arch/arm/mach-at91/board-sam9rlek.c | 2 +-
arch/arm/mach-at91/board-snapper9260.c | 2 +-
arch/arm/mach-at91/board-stamp9g20.c | 4 +-
arch/arm/mach-at91/generic.h | 8 +-
arch/arm/mach-at91/setup.c | 5 +
arch/arm/mach-at91/soc.h | 1 +
drivers/clocksource/Kconfig | 4 +
drivers/clocksource/Makefile | 1 +
drivers/clocksource/timer-atmel-pit.c | 304 ++++++++++++++++++++++++++++++++
32 files changed, 505 insertions(+), 345 deletions(-)
delete mode 100644 arch/arm/mach-at91/at91sam926x_time.c
create mode 100644 drivers/clocksource/timer-atmel-pit.c

--
Nicolas Ferre


\
 
 \ /
  Last update: 2014-09-05 19:01    [W:0.147 / U:0.480 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site