lkml.org 
[lkml]   [2014]   [Sep]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v9 0/4] APM X-Gene PCIe host controller
From
Hi Tanmay,

On Wed, Sep 17, 2014 at 6:33 AM, Tanmay Inamdar <tinamdar@apm.com> wrote:
> This patch adds support for AppliedMicro X-Gene PCIe host controller. The
> driver is tested on X-Gene platform with different gen1/2/3 PCIe endpoint
> cards.
>
> X-Gene PCIe controller driver has depedency on the pcie arm64 arch support.
> Liviu Dudau from ARM has sent a patch set for pcie arm64 arch support and
> support for creating generic pcie bridge from device tree. Liviu's patches
> are available here
> https://lkml.org/lkml/2014/9/8/333
>
> If someone wishes to test PCIe on X-Gene with this patch set, above mentioned
> patches from Liviu must be applied before the patches in this patch set. Also
> please use latest xgene u-boot firmware.
>
> changes since V8:
> 1. Add 'dma-coherent' attribute in device node.


I just tested your V9 patches plus Liviu's V10 PCI/ARM64 patches
against 3.17-rc5 on Mustang, and the following failure is triggered:

[ 1.190131] bnx2x: Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit
Ethernet Driver bnx2x 1.78.19-0 (2014/02/10)
[ 1.200249] tg3.c:v3.137 (May 11, 2014)
[ 1.204087] ------------[ cut here ]------------
[ 1.208682] WARNING: CPU: 1 PID: 1 at drivers/pci/pci.c:131
pci_ioremap_bar+0x70/0x78()
[ 1.216646] Modules linked in:
[ 1.219696] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.17.0-rc5+ #1
[ 1.226018] Call trace:
[ 1.228453] [<ffffffc0000884f0>] dump_backtrace+0x0/0x16c
[ 1.233826] [<ffffffc00008866c>] show_stack+0x10/0x1c
[ 1.238851] [<ffffffc0006e3210>] dump_stack+0x74/0x94
[ 1.243878] [<ffffffc0000a934c>] warn_slowpath_common+0x88/0xb0
[ 1.249767] [<ffffffc0000a9438>] warn_slowpath_null+0x14/0x20
[ 1.255485] [<ffffffc0003994c4>] pci_ioremap_bar+0x6c/0x78
[ 1.260942] [<ffffffc0005598cc>] tg3_init_one+0x148/0x16f4
[ 1.266401] [<ffffffc00039ccf0>] pci_device_probe+0x78/0xd4
[ 1.271946] [<ffffffc00042785c>] driver_probe_device+0x94/0x390
[ 1.277834] [<ffffffc000427c44>] __driver_attach+0x98/0xa0
[ 1.283293] [<ffffffc000425a54>] bus_for_each_dev+0x54/0x98
[ 1.288835] [<ffffffc00042730c>] driver_attach+0x1c/0x28
[ 1.294121] [<ffffffc000426f04>] bus_add_driver+0x164/0x240
[ 1.299663] [<ffffffc000428430>] driver_register+0x64/0x130
[ 1.305207] [<ffffffc00039c97c>] __pci_register_driver+0x3c/0x48
[ 1.311181] [<ffffffc000aa8a5c>] tg3_driver_init+0x1c/0x28
[ 1.316640] [<ffffffc0000814e0>] do_one_initcall+0xc4/0x1b4
[ 1.322186] [<ffffffc000a74b64>] kernel_init_freeable+0x1b8/0x25c
[ 1.328246] [<ffffffc0006de318>] kernel_init+0xc/0xd4
[ 1.333278] ---[ end trace f4dca5ab5b436080 ]---
[ 1.337871] tg3 0000:01:00.0: Cannot map device registers, aborting
[ 1.344122] tg3: probe of 0000:01:00.0 failed with error -12



Thanks,

>
> changes since V7:
> 1. Fix outbound region mapping for IO region. Thanks Liviu for the catch.
>
> changes since V6:
> 1. Port driver to changed interface as per Liviu's v10 series.
>
> changes since V5:
> 1. Port driver to changed interface of 'of_create_pci_host_bridge'
> 2. Fix the prefetch bit setting
> 3. Removed bunch of register programming which is already done by firmware
>
> changes since V4:
> 1. fix section mismatch warnings
> 2. fix the patch description
> 3. fix indentation
> 4. update read/write cfg functions by passing both addr and offset.
> 5. use 'time_before' for timeout.
> 6. remove unnecessary 'IS_ERR_OR_NULL'. Keep 'IS_ERR' for 'clk_get'
> 7. remove BUG_ON for pci_ioremap_io.
>
> changes since V3:
> 1. remove 'struct hw_pci' and supporting ops in hw_pci
> 2. add code to create the host bridge from dts
> 3. add code to scan the the host bridge
> 4. modify outbound windows setup function to get resource information from
> 'bridge->windows'
> 5. add compatible string in pcie dts node with current X-Gene SOC name.
>
> changes since V2:
> 1. redefined each PCI port in different PCI domain correctly.
> 2. removed setup_lane and setup_link functions from driver.
> 3. removed scan_bus wrapper and set_primary_bus hack.
> 4. added pci_ioremap_io for io resources.
>
> changes since V1:
> 1. added PCI domain support
> 2. reading cpu and pci addresses from device tree to configure regions.
> 3. got rid of unnecessary wrappers for readl and writel.
> 4. got rid of endpoint configuration code.
> 5. added 'dma-ranges' property support to read inbound region configuration.
> 6. renamed host driver file to 'pci-xgene.c' from 'pcie-xgene.c'
> 7. dropped 'clock-names' property from bindings
> 8. added comments whereever requested.
>
>
> Tanmay Inamdar (4):
> pci:host: APM X-Gene PCIe host controller driver
> arm64: dts: APM X-Gene PCIe device tree nodes
> dt-bindings: pci: xgene pcie device tree bindings
> MAINTAINERS: entry for APM X-Gene PCIe host driver
>
> .../devicetree/bindings/pci/xgene-pci.txt | 57 ++
> MAINTAINERS | 8 +
> arch/arm64/boot/dts/apm-mustang.dts | 8 +
> arch/arm64/boot/dts/apm-storm.dtsi | 165 ++++++
> drivers/pci/host/Kconfig | 10 +
> drivers/pci/host/Makefile | 1 +
> drivers/pci/host/pci-xgene.c | 646 +++++++++++++++++++++
> 7 files changed, 895 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/pci/xgene-pci.txt
> create mode 100644 drivers/pci/host/pci-xgene.c
>
> --
> 1.9.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/



--
Ming Lei


\
 
 \ /
  Last update: 2014-09-19 05:21    [W:1.020 / U:0.548 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site