Messages in this thread Patch in this message | | | From | Philippe Reynes <> | Subject | [PATCH v4] apf27dev: add max1027 in the dts | Date | Mon, 1 Sep 2014 20:44:32 +0200 |
| |
Signed-off-by: Philippe Reynes <tremyfr@gmail.com> --- arch/arm/boot/dts/imx27-apf27dev.dts | 17 +++++++++++++++++ 1 files changed, 17 insertions(+), 0 deletions(-)
Changelog: v4: (thanks Shawn Guo for the feedback) - put max1027 pinctl in the right place - use 0x0 instead of 0
v3: (thanks Alexander Shiyan for the feedback) - add datasheet pin name as comment
v2: (thanks Alexander Shiyan for the feedback) - spi mode 0 is the default so no need to explicitly define it
diff --git a/arch/arm/boot/dts/imx27-apf27dev.dts b/arch/arm/boot/dts/imx27-apf27dev.dts index b982309..bba3f41 100644 --- a/arch/arm/boot/dts/imx27-apf27dev.dts +++ b/arch/arm/boot/dts/imx27-apf27dev.dts @@ -82,6 +82,16 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_cspi1 &pinctrl_cspi1_cs>; status = "okay"; + + adc@0 { + compatible = "maxim,max1027"; + reg = <0>; + interrupt-parent = <&gpio5>; + interrupts = <15 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_max1027>; + spi-max-frequency = <10000000>; + }; }; &cspi2 { @@ -210,6 +220,13 @@ >; }; + pinctrl_max1027: max1027 { + fsl,pins = < + MX27_PAD_UART1_CTS__GPIO5_14 0x0 /* CNVST */ + MX27_PAD_UART1_RTS__GPIO5_15 0x0 /* EOC */ + >; + }; + pinctrl_pwm: pwmgrp { fsl,pins = < MX27_PAD_PWMO__PWMO 0x0 -- 1.7.4.4
| |