lkml.org 
[lkml]   [2014]   [Jul]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 00/15] atmel_mxt_ts - device tree, bootloader, etc
On Monday 07 July 2014 05:08 PM, Nick Dyer wrote:
> On 07/07/14 12:21, Sekhar Nori wrote:
>> I was unable to get the touchscreen working on my board after applying
>> just these patches. It does work correctly with your for-next branch so
>> I guess I need to wait for you to post the rest of your patches too.
>>
>> Here are the relevant messages at boot. Full boot log is available here
>> (in case you want to have a look): http://paste.ubuntu.com/7759703/
>>
>> [ 2.315717] atmel_mxt_ts 0-004a: Direct firmware load failed with error -2
>> [ 2.322949] atmel_mxt_ts 0-004a: Falling back to user helper
>> [ 5.934924] atmel_mxt_ts 0-004a: Wait for completion timed out.
>> [ 5.941237] atmel_mxt_ts 0-004a: Warning: Info CRC error - device=0x000000 file=0x8EE45C
>> [ 7.294769] atmel_mxt_ts 0-004a: Wait for completion timed out.
>> [ 7.300976] atmel_mxt_ts 0-004a: Resetting chip
>> [ 10.574729] atmel_mxt_ts 0-004a: Wait for completion timed out.
>> [ 10.581010] atmel_mxt_ts 0-004a: Error -110 updating config
>> [ 10.626788] atmel_mxt_ts 0-004a: Family: 128 Variant: 1 Firmware V1.6.AB Objects: 17
>>
>> One key difference is that these patches try to load the config at
>> probe where as with your -next branch that is avoided in the DT case.
>> This is also missing the new update_cfg sysfs interface (which I guess
>> you will post as follow-on patches).
>>
>> The wait_for_completion() times out because the interrupt never
>> arrives. Even later when testing using evtest, I do not see interrupts
>> coming. There are only two interrupts that arrive during boot and it
>> stays that way. There is something going on with the way interrupts are
>> handled. I havent debugged further yet. This problem is not there with
>> your for-next branch.
>
> Thanks for trying this, apologies that it didn't work.
>
> Looking at it, I've a feeling that this is the solution for the issue you see:
> https://github.com/ndyer/linux/commit/4e8f8d56361b09a2a

Okay, I rebased that patch onto this series, but it did not solve the
problem.

>
> Although, the fact that it says the device is reporting the Info CRC to be
> 0x000000 is rather odd, as well.

Thats because the device was not configured at factory (I was using the
board for the first time). Once I run the kernel from your for-next branch,
this messages disappear since I guess the configuration is successfully
flashed by that kernel.

> It would be useful if you could turn on all the debug in the driver and
> re-test (#define DEBUG 1 at the top). However, if you don't have time, I
> will try and reproduce on my test system.

Here are the messages I see:

[ 2.257611] atmel_mxt_ts 0-004a: T5 Start:242 Size:9 Instances:1 Report IDs:0-0
[ 2.265261] atmel_mxt_ts 0-004a: T6 Start:251 Size:6 Instances:1 Report IDs:1-1
[ 2.272966] atmel_mxt_ts 0-004a: T38 Start:257 Size:8 Instances:1 Report IDs:0-0
[ 2.280726] atmel_mxt_ts 0-004a: T7 Start:265 Size:3 Instances:1 Report IDs:0-0
[ 2.288389] atmel_mxt_ts 0-004a: T8 Start:268 Size:8 Instances:1 Report IDs:0-0
[ 2.296045] atmel_mxt_ts 0-004a: T9 Start:276 Size:31 Instances:1 Report IDs:2-11
[ 2.303905] atmel_mxt_ts 0-004a: T15 Start:307 Size:11 Instances:1 Report IDs:12-12
[ 2.311935] atmel_mxt_ts 0-004a: T18 Start:318 Size:2 Instances:1 Report IDs:0-0
[ 2.319695] atmel_mxt_ts 0-004a: T19 Start:320 Size:16 Instances:1 Report IDs:13-13
[ 2.327723] atmel_mxt_ts 0-004a: T20 Start:336 Size:12 Instances:1 Report IDs:14-14
[ 2.335732] atmel_mxt_ts 0-004a: T22 Start:348 Size:17 Instances:1 Report IDs:15-15
[ 2.343761] atmel_mxt_ts 0-004a: T23 Start:365 Size:15 Instances:1 Report IDs:16-16
[ 2.351789] atmel_mxt_ts 0-004a: T24 Start:380 Size:19 Instances:1 Report IDs:17-20
[ 2.359812] atmel_mxt_ts 0-004a: T25 Start:399 Size:14 Instances:1 Report IDs:21-21
[ 2.367844] atmel_mxt_ts 0-004a: T27 Start:413 Size:7 Instances:1 Report IDs:22-22
[ 2.375763] atmel_mxt_ts 0-004a: T28 Start:420 Size:6 Instances:1 Report IDs:23-23
[ 2.383705] atmel_mxt_ts 0-004a: T37 Start:112 Size:130 Instances:1 Report IDs:0-0
[ 2.401277] atmel_mxt_ts 0-004a: T6 Config Checksum: 0x6BC1AB
[ 2.407301] atmel_mxt_ts 0-004a: T6 Status 0x90 RESET CAL
[ 2.413026] atmel_mxt_ts 0-004a: T6 Status 0x00 OK
[ 2.424854] atmel_mxt_ts 0-004a: Direct firmware load failed with error -2
[ 2.462113] atmel_mxt_ts 0-004a: Falling back to user helper
[ 5.698524] atmel_mxt_ts 0-004a: Initialized power cfg: ACTV 255, IDLE 32
[ 5.712014] atmel_mxt_ts 0-004a: Touchscreen size X799Y479
[ 5.742180] atmel_mxt_ts 0-004a: Family: 128 Variant: 1 Firmware V1.6.AB Objects: 17

Full testing log here: http://paste.ubuntu.com/7765352/

Thanks,
Sekhar



\
 
 \ /
  Last update: 2014-07-08 15:21    [W:0.126 / U:0.816 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site