lkml.org 
[lkml]   [2014]   [Jul]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 00/15] atmel_mxt_ts - device tree, bootloader, etc
Hi Nick,

On Thursday 03 July 2014 08:31 PM, nick.dyer@itdev.co.uk wrote:
> Hi Dimitry-
>
> Here is another set of atmel_mxt_ts patches for upstream. There are some
> really useful new features, but I hope nothing too controversial.

I was unable to get the touchscreen working on my board after applying
just these patches. It does work correctly with your for-next branch so
I guess I need to wait for you to post the rest of your patches too.

Here are the relevant messages at boot. Full boot log is available here
(in case you want to have a look): http://paste.ubuntu.com/7759703/

[ 2.315717] atmel_mxt_ts 0-004a: Direct firmware load failed with error -2
[ 2.322949] atmel_mxt_ts 0-004a: Falling back to user helper
[ 5.934924] atmel_mxt_ts 0-004a: Wait for completion timed out.
[ 5.941237] atmel_mxt_ts 0-004a: Warning: Info CRC error - device=0x000000 file=0x8EE45C
[ 7.294769] atmel_mxt_ts 0-004a: Wait for completion timed out.
[ 7.300976] atmel_mxt_ts 0-004a: Resetting chip
[ 10.574729] atmel_mxt_ts 0-004a: Wait for completion timed out.
[ 10.581010] atmel_mxt_ts 0-004a: Error -110 updating config
[ 10.626788] atmel_mxt_ts 0-004a: Family: 128 Variant: 1 Firmware V1.6.AB Objects: 17

One key difference is that these patches try to load the config at
probe where as with your -next branch that is avoided in the DT case.
This is also missing the new update_cfg sysfs interface (which I guess
you will post as follow-on patches).

The wait_for_completion() times out because the interrupt never
arrives. Even later when testing using evtest, I do not see interrupts
coming. There are only two interrupts that arrive during boot and it
stays that way. There is something going on with the way interrupts are
handled. I havent debugged further yet. This problem is not there with
your for-next branch.

I used your mxt-app to dump configuration in both cases and its exactly
the same.

Thanks,
Sekhar



\
 
 \ /
  Last update: 2014-07-07 14:01    [W:0.261 / U:0.116 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site