lkml.org 
[lkml]   [2014]   [Jul]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 0/3] Add USB HCD support for STi SoCs
Date
This driver adds support for the USB HCD controller present in STi
SoC's from STMicroelectronics. It has been tested on the stih416-b2020
board.

The original author is no longer with the company and therefore emails
to his address bounce, thus I have not added him to CC.

Changes since v1:
- Correct s/OCHI/OHCI/ spelling
- Improve kconfig help message
- Various formating / spelling nits identified by Lee Jones
- Make driver depend on OF & remove node checks in code
- Use devm_ioremap_resource
- Remove unnecessary header files

Peter Griffin (3):
usb: host: st-hcd: Add USB HCD support for STi SoCs
usb: host: st-hcd: Add st-hcd devicetree bindings documentation.
MAINTAINERS: Add st-hcd to ARCH/STI architecture

Documentation/devicetree/bindings/usb/st-hcd.txt | 51 +++
MAINTAINERS | 1 +
drivers/usb/host/Kconfig | 13 +
drivers/usb/host/Makefile | 1 +
drivers/usb/host/st-hcd.c | 471 +++++++++++++++++++++++
5 files changed, 537 insertions(+)
create mode 100644 Documentation/devicetree/bindings/usb/st-hcd.txt
create mode 100644 drivers/usb/host/st-hcd.c

--
1.9.1



\
 
 \ /
  Last update: 2014-07-24 13:41    [W:0.083 / U:0.160 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site