lkml.org 
[lkml]   [2014]   [Jun]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/1] ARM: dts: zynq: Prepare Parallella
Date
Hello,

This patch adds an initial device tree for the Parallella board.
UART, SD card, Ethernet are enabled.
Not yet enabled are HDMI (FPGA, ADV7513), QSPI and 2x USB.

Where I'm a bit unsure is the PHY placement; placement as subnode of the
GEM corresponds to what was in the downstream 3.12 based device tree. It
is a separate chip on the board though, whereas GEM is on the SoC.

Regards,
Andreas

Andreas Färber (1):
ARM: dts: zynq: Add Parallella device tree

arch/arm/boot/dts/Makefile | 4 ++-
arch/arm/boot/dts/zynq-parallella.dts | 63 +++++++++++++++++++++++++++++++++++
2 files changed, 66 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/boot/dts/zynq-parallella.dts

--
1.9.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2014-06-29 23:21    [W:0.081 / U:0.260 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site