lkml.org 
[lkml]   [2014]   [May]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v3 0/7] ARM: berlin: add pinctrl support
Date
This series adds support for the Marvell Berlin pin-controller, allowing
to configure the pin muxing from the device tree.

The Berlin pin-controller support is divided into 3 drivers, each
driving one Berlin SoC. These drivers use a Berlin common part.

This series applies on top of patches introducing the Marvell Berlin
BG2Q you can find on Sebastian's berlin/for-next branch[1] and the patch
allowing not to define the get_group_pins() function[2].

Tested on the Berlin BG2Q.

[1] https://github.com/shesselba/linux-berlin/commits/berlin/for-next
[2] https://patchwork.kernel.org/patch/3964491/

Changes since v2:
- added the uart2 pin muxing node for BG2
- cosmetic fixes

Changes since v1:
- moved the driver to a specific berlin/ directory
- divided the pin-controller driver into three (one per SoC) and
reworked the driver dependencies accordingly
- reworked the device tree bindings
- removed the reg-names and reworked the driver to allow
splitting the two pin-controllers into two separate nodes in
the device tree
- updated the documentation
- removed unnecessary checks
- added support to mux multiple groups with the same function
- added BG2, BG2 and BG2CD function definitions

Antoine Ténart (7):
pinctrl: berlin: add the core pinctrl driver for Marvell Berlin SoCs
pinctrl: berlin: add the BG2Q pinctrl driver
pinctrl: berlin: add the BG2 pinctrl driver
pinctrl: berlin: add the BG2CD pinctrl driver
ARM: berlin: add the pinctrl dependency for the Marvell Berlin SoCs
Documentation: add the Marvell Berlin pinctrl documentation
ARM: dts: berlin: add the pinctrl node and muxing setup for uarts

.../bindings/pinctrl/marvell,berlin-pinctrl.txt | 45 +++
arch/arm/boot/dts/berlin2.dtsi | 31 ++
arch/arm/boot/dts/berlin2cd.dtsi | 17 +
arch/arm/boot/dts/berlin2q.dtsi | 24 ++
arch/arm/mach-berlin/Kconfig | 4 +
drivers/pinctrl/Kconfig | 1 +
drivers/pinctrl/Makefile | 1 +
drivers/pinctrl/berlin/Kconfig | 19 +
drivers/pinctrl/berlin/Makefile | 4 +
drivers/pinctrl/berlin/berlin-bg2.c | 251 +++++++++++++
drivers/pinctrl/berlin/berlin-bg2cd.c | 194 ++++++++++
drivers/pinctrl/berlin/berlin-bg2q.c | 413 +++++++++++++++++++++
drivers/pinctrl/berlin/berlin.c | 346 +++++++++++++++++
drivers/pinctrl/berlin/berlin.h | 71 ++++
14 files changed, 1421 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/marvell,berlin-pinctrl.txt
create mode 100644 drivers/pinctrl/berlin/Kconfig
create mode 100644 drivers/pinctrl/berlin/Makefile
create mode 100644 drivers/pinctrl/berlin/berlin-bg2.c
create mode 100644 drivers/pinctrl/berlin/berlin-bg2cd.c
create mode 100644 drivers/pinctrl/berlin/berlin-bg2q.c
create mode 100644 drivers/pinctrl/berlin/berlin.c
create mode 100644 drivers/pinctrl/berlin/berlin.h

--
1.8.3.2

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2014-05-05 07:41    [W:0.210 / U:0.732 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site