lkml.org 
[lkml]   [2014]   [May]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] regulator: core: Fix the init of DT defined fixed regulators
Date
When a regulator is defined using DT and it has a single voltage the
regulator init always tries to apply this voltage. However this fails
if the regulator isn't settable. So skip this step if the regulator
doesn't provides any set method.

Signed-off-by: Alban Bedel <alban.bedel@avionic-design.de>
---
drivers/regulator/core.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 9a09f3c..e57450f 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -843,7 +843,9 @@ static int machine_constraints_voltage(struct regulator_dev *rdev,

/* do we need to apply the constraint voltage */
if (rdev->constraints->apply_uV &&
- rdev->constraints->min_uV == rdev->constraints->max_uV) {
+ rdev->constraints->min_uV == rdev->constraints->max_uV &&
+ (rdev->desc->ops->set_voltage ||
+ rdev->desc->ops->set_voltage_sel)) {
ret = _regulator_do_set_voltage(rdev,
rdev->constraints->min_uV,
rdev->constraints->max_uV);
--
1.9.3


\
 
 \ /
  Last update: 2014-05-19 14:01    [W:0.067 / U:1.452 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site