lkml.org 
[lkml]   [2014]   [May]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH RESEND v4 5/8] usb: ehci-platform: add optional reset controller retrieval
Date
From: Boris BREZILLON <boris.brezillon@free-electrons.com>

On the Allwinner's A31 SoC the reset line connected to the EHCI IP has to
be deasserted for the EHCI block to be usable.

Add support for an optional reset controller that will be deasserted on
power off and asserted on power on.

Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
---
Documentation/devicetree/bindings/usb/usb-ehci.txt | 1 +
drivers/usb/host/ehci-platform.c | 26 +++++++++++++++++++---
2 files changed, 24 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/usb/usb-ehci.txt b/Documentation/devicetree/bindings/usb/usb-ehci.txt
index ff151ec084c4..43c1a4e06767 100644
--- a/Documentation/devicetree/bindings/usb/usb-ehci.txt
+++ b/Documentation/devicetree/bindings/usb/usb-ehci.txt
@@ -15,6 +15,7 @@ Optional properties:
- clocks : a list of phandle + clock specifier pairs
- phys : phandle + phy specifier pair
- phy-names : "usb"
+ - resets : phandle + reset specifier pair

Example (Sequoia 440EPx):
ehci@e0000300 {
diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c
index c7dd93aad20c..2f5b9ce3e042 100644
--- a/drivers/usb/host/ehci-platform.c
+++ b/drivers/usb/host/ehci-platform.c
@@ -29,6 +29,7 @@
#include <linux/of.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
+#include <linux/reset.h>
#include <linux/usb.h>
#include <linux/usb/hcd.h>
#include <linux/usb/ehci_pdriver.h>
@@ -41,6 +42,7 @@

struct ehci_platform_priv {
struct clk *clks[EHCI_MAX_CLKS];
+ struct reset_control *rst;
struct phy *phy;
};

@@ -208,6 +210,18 @@ static int ehci_platform_probe(struct platform_device *dev)
}
}

+ priv->rst = devm_reset_control_get_optional(&dev->dev, NULL);
+ if (IS_ERR(priv->rst)) {
+ err = PTR_ERR(priv->rst);
+ if (err == -EPROBE_DEFER)
+ goto err_put_clks;
+ priv->rst = NULL;
+ } else {
+ err = reset_control_deassert(priv->rst);
+ if (err)
+ goto err_put_clks;
+ }
+
if (pdata->big_endian_desc)
ehci->big_endian_desc = 1;
if (pdata->big_endian_mmio)
@@ -218,7 +232,7 @@ static int ehci_platform_probe(struct platform_device *dev)
dev_err(&dev->dev,
"Error: CONFIG_USB_EHCI_BIG_ENDIAN_MMIO not set\n");
err = -EINVAL;
- goto err_put_clks;
+ goto err_reset;
}
#endif
#ifndef CONFIG_USB_EHCI_BIG_ENDIAN_DESC
@@ -226,14 +240,14 @@ static int ehci_platform_probe(struct platform_device *dev)
dev_err(&dev->dev,
"Error: CONFIG_USB_EHCI_BIG_ENDIAN_DESC not set\n");
err = -EINVAL;
- goto err_put_clks;
+ goto err_reset;
}
#endif

if (pdata->power_on) {
err = pdata->power_on(dev);
if (err < 0)
- goto err_put_clks;
+ goto err_reset;
}

hcd->rsrc_start = res_mem->start;
@@ -256,6 +270,9 @@ static int ehci_platform_probe(struct platform_device *dev)
err_power:
if (pdata->power_off)
pdata->power_off(dev);
+err_reset:
+ if (priv->rst)
+ reset_control_assert(priv->rst);
err_put_clks:
while (--clk >= 0)
clk_put(priv->clks[clk]);
@@ -280,6 +297,9 @@ static int ehci_platform_remove(struct platform_device *dev)
if (pdata->power_off)
pdata->power_off(dev);

+ if (priv->rst)
+ reset_control_assert(priv->rst);
+
for (clk = 0; clk < EHCI_MAX_CLKS && priv->clks[clk]; clk++)
clk_put(priv->clks[clk]);

--
1.9.3


\
 
 \ /
  Last update: 2014-05-14 07:41    [W:0.255 / U:0.336 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site