lkml.org 
[lkml]   [2014]   [May]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH RESEND v4 4/8] phy: usb: sunxi: Introduce Allwinner A31 USB PHY support
Date
The USB phy controller in the A31 differs mostly from the older controllers
because it has a clock dedicated for each phy, while the older ones were having
a single clock for all the phys.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
---
drivers/phy/phy-sun4i-usb.c | 33 ++++++++++++++++++++++-----------
1 file changed, 22 insertions(+), 11 deletions(-)

diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/phy-sun4i-usb.c
index 66a87d50512b..115d8d5190d5 100644
--- a/drivers/phy/phy-sun4i-usb.c
+++ b/drivers/phy/phy-sun4i-usb.c
@@ -61,7 +61,6 @@
#define MAX_PHYS 3

struct sun4i_usb_phy_data {
- struct clk *clk;
void __iomem *base;
struct mutex mutex;
int num_phys;
@@ -71,6 +70,7 @@ struct sun4i_usb_phy_data {
void __iomem *pmu;
struct regulator *vbus;
struct reset_control *reset;
+ struct clk *clk;
int index;
} phys[MAX_PHYS];
};
@@ -146,13 +146,13 @@ static int sun4i_usb_phy_init(struct phy *_phy)
struct sun4i_usb_phy_data *data = to_sun4i_usb_phy_data(phy);
int ret;

- ret = clk_prepare_enable(data->clk);
+ ret = clk_prepare_enable(phy->clk);
if (ret)
return ret;

ret = reset_control_deassert(phy->reset);
if (ret) {
- clk_disable_unprepare(data->clk);
+ clk_disable_unprepare(phy->clk);
return ret;
}

@@ -170,11 +170,10 @@ static int sun4i_usb_phy_init(struct phy *_phy)
static int sun4i_usb_phy_exit(struct phy *_phy)
{
struct sun4i_usb_phy *phy = phy_get_drvdata(_phy);
- struct sun4i_usb_phy_data *data = to_sun4i_usb_phy_data(phy);

sun4i_usb_phy_passby(phy, 0);
reset_control_assert(phy->reset);
- clk_disable_unprepare(data->clk);
+ clk_disable_unprepare(phy->clk);

return 0;
}
@@ -225,6 +224,7 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev)
struct device *dev = &pdev->dev;
struct device_node *np = dev->of_node;
struct phy_provider *phy_provider;
+ bool dedicated_clocks;
struct resource *res;
int i;

@@ -244,17 +244,16 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev)
else
data->disc_thresh = 2;

+ if (of_device_is_compatible(np, "allwinner,sun6i-a31-usb-phy"))
+ dedicated_clocks = true;
+ else
+ dedicated_clocks = false;
+
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phy_ctrl");
data->base = devm_ioremap_resource(dev, res);
if (IS_ERR(data->base))
return PTR_ERR(data->base);

- data->clk = devm_clk_get(dev, "usb_phy");
- if (IS_ERR(data->clk)) {
- dev_err(dev, "could not get usb_phy clock\n");
- return PTR_ERR(data->clk);
- }
-
/* Skip 0, 0 is the phy for otg which is not yet supported. */
for (i = 1; i < data->num_phys; i++) {
struct sun4i_usb_phy *phy = data->phys + i;
@@ -268,6 +267,17 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev)
phy->vbus = NULL;
}

+ if (dedicated_clocks)
+ snprintf(name, sizeof(name), "usb%d_phy", i);
+ else
+ strlcpy(name, "usb_phy", sizeof(name));
+
+ phy->clk = devm_clk_get(dev, name);
+ if (IS_ERR(phy->clk)) {
+ dev_err(dev, "failed to get clock %s\n", name);
+ return PTR_ERR(phy->clk);
+ }
+
snprintf(name, sizeof(name), "usb%d_reset", i);
phy->reset = devm_reset_control_get(dev, name);
if (IS_ERR(phy->reset)) {
@@ -305,6 +315,7 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev)
static const struct of_device_id sun4i_usb_phy_of_match[] = {
{ .compatible = "allwinner,sun4i-a10-usb-phy" },
{ .compatible = "allwinner,sun5i-a13-usb-phy" },
+ { .compatible = "allwinner,sun6i-a31-usb-phy" },
{ .compatible = "allwinner,sun7i-a20-usb-phy" },
{ },
};
--
1.9.3


\
 
 \ /
  Last update: 2014-05-17 10:41    [W:0.147 / U:0.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site