lkml.org 
[lkml]   [2014]   [Apr]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 1/3] perf tests: Introduce perf_regs_load function on ARM64
From
Hi Mark,

ping on this series, see comment below.

On 25 March 2014 16:23, Jean Pihet <jean.pihet@linaro.org> wrote:
> Hi Mark,
>
> On 21 March 2014 16:11, Mark Rutland <mark.rutland@arm.com> wrote:
>> Hi Jean,
>>
>> On Wed, Mar 19, 2014 at 09:42:33AM +0000, Jean Pihet wrote:
>>> Introducing perf_regs_load function, which is going
>>> to be used for dwarf unwind test in following patches.
>>>
>>> It takes single argument as a pointer to the regs dump
>>> buffer and populates it with current registers values, as
>>> expected by the perf built-in unwinding test.
>>>
>>> Signed-off-by: Jean Pihet <jean.pihet@linaro.org>
>>> Cc: Steve Capper <steve.capper@linaro.org>
>>> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
>>> Cc: Frederic Weisbecker <fweisbec@gmail.com>
>>> Cc: Ingo Molnar <mingo@kernel.org>
>>> Cc: Namhyung Kim <namhyung@kernel.org>
>>> Cc: Paul Mackerras <paulus@samba.org>
>>> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
>>> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
>>> Cc: David Ahern <dsahern@gmail.com>
>>> Cc: Jiri Olsa <jolsa@redhat.com>
>>> ---
>>> tools/perf/arch/arm64/Makefile | 1 +
>>> tools/perf/arch/arm64/include/perf_regs.h | 2 ++
>>> tools/perf/arch/arm64/tests/regs_load.S | 39 +++++++++++++++++++++++++++++++
>>> 3 files changed, 42 insertions(+)
>>> create mode 100644 tools/perf/arch/arm64/tests/regs_load.S
>>>
>>> diff --git a/tools/perf/arch/arm64/Makefile b/tools/perf/arch/arm64/Makefile
>>> index 67e9b3d..9b8f87e 100644
>>> --- a/tools/perf/arch/arm64/Makefile
>>> +++ b/tools/perf/arch/arm64/Makefile
>>> @@ -4,4 +4,5 @@ LIB_OBJS += $(OUTPUT)arch/$(ARCH)/util/dwarf-regs.o
>>> endif
>>> ifndef NO_LIBUNWIND
>>> LIB_OBJS += $(OUTPUT)arch/$(ARCH)/util/unwind-libunwind.o
>>> +LIB_OBJS += $(OUTPUT)arch/$(ARCH)/tests/regs_load.o
>>> endif
>>> diff --git a/tools/perf/arch/arm64/include/perf_regs.h b/tools/perf/arch/arm64/include/perf_regs.h
>>> index 2359546..1e052f1 100644
>>> --- a/tools/perf/arch/arm64/include/perf_regs.h
>>> +++ b/tools/perf/arch/arm64/include/perf_regs.h
>>> @@ -9,6 +9,8 @@
>>> #define PERF_REG_IP PERF_REG_ARM64_PC
>>> #define PERF_REG_SP PERF_REG_ARM64_SP
>>>
>>> +void perf_regs_load(u64 *regs);
>>> +
>>> static inline const char *perf_reg_name(int id)
>>> {
>>> switch (id) {
>>> diff --git a/tools/perf/arch/arm64/tests/regs_load.S b/tools/perf/arch/arm64/tests/regs_load.S
>>> new file mode 100644
>>> index 0000000..92ab968
>>> --- /dev/null
>>> +++ b/tools/perf/arch/arm64/tests/regs_load.S
>>> @@ -0,0 +1,39 @@
>>> +#include <linux/linkage.h>
>>> +
>>> +/*
>>> + * Implementation of void perf_regs_load(u64 *regs);
>>> + *
>>> + * This functions fills in the 'regs' buffer from the actual registers values,
>>> + * in the way the perf built-in unwinding test expects them:
>>> + * - the PC at the time at the call to this function. Since this function
>>> + * is called using a bl instruction, the PC value is taken from LR,
>>
>> Is it guaranteed that this function is always invoked with a branch with
>> link instruction, or is that just what current compiler versions are
>> doing? I couldn't see where we would get that guarantee from.
> The current compiler implements the call as a bl instruction.
>
>> If it is called with a branch with link, then the LR value will be the
>> PC at call time + 4, rather than just the exact PC at call time. If not
>> then we don't have a guaranteed relationship between the PC at call time
>> and the current LR value.
>>
>> If the only place that perf_regs_load is used is a single test which
>> doesn't care about the precise PC at the time of the call, then it's
>> probably OK to use the LR value, but we should be careful to document
>> what the faked-up PC actually is and how we expect it to be used.
> The code is only used by an unwinding test. The unwinding code
> resolves the function name from an address range found in the dwarf
> information so in principle it is ok to use the PC/LR at the time of
> the call to a function.
>
> Is the comment above OK or do you want an update of the code as well?
What do you think?

Regards,
Jean

>
>>
>>> + * - the current SP (not touched by this function),
>>> + * - the current value of LR is merely retrieved and stored because the
>>> + * value before the call to this function is unknown at this time; it will
>>> + * be unwound from the dwarf information in unwind__get_entries.
>>> + */
>>> +
>>> +.text
>>> +.type perf_regs_load,%function
>>> +ENTRY(perf_regs_load)
>>> + stp x0, x1, [x0], #16 // store x0..x29
>>> + stp x2, x3, [x0], #16
>>> + stp x4, x5, [x0], #16
>>> + stp x6, x7, [x0], #16
>>> + stp x8, x9, [x0], #16
>>> + stp x10, x11, [x0], #16
>>> + stp x12, x13, [x0], #16
>>> + stp x14, x15, [x0], #16
>>> + stp x16, x17, [x0], #16
>>> + stp x18, x19, [x0], #16
>>> + stp x20, x21, [x0], #16
>>> + stp x22, x23, [x0], #16
>>> + stp x24, x25, [x0], #16
>>> + stp x26, x27, [x0], #16
>>> + stp x28, x29, [x0], #16
>>> + mov x1, sp
>>> + stp x30, x1, [x0], #16 // store lr and sp
>>> + str x30, [x0] // store pc as lr in order to skip the call
>>> + // to this function
>>
>> It might be better to word this a "store the lr in place of the pc". To
>> me at least the current wording implies the opposite of what the code
>> seems to be doing.
> Ok the last comment can be updated.
>
> Thanks!
> Jean
>
>>
>> Cheers,
>> Mark.
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>> Please read the FAQ at http://www.tux.org/lkml/


\
 
 \ /
  Last update: 2014-04-04 10:01    [W:1.277 / U:0.328 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site