lkml.org 
[lkml]   [2014]   [Apr]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 1/3] perf tests: Introduce perf_regs_load function on ARM64
From
On 22 April 2014 15:42, Mark Rutland <mark.rutland@arm.com> wrote:
> Hi Jean,
>
> Apologies for the delay on this.
>
> On Tue, Mar 25, 2014 at 03:23:26PM +0000, Jean Pihet wrote:
>> Hi Mark,
>>
>> On 21 March 2014 16:11, Mark Rutland <mark.rutland@arm.com> wrote:
>> > Hi Jean,
>> >
>> > On Wed, Mar 19, 2014 at 09:42:33AM +0000, Jean Pihet wrote:
>> >> Introducing perf_regs_load function, which is going
>> >> to be used for dwarf unwind test in following patches.
>> >>
>> >> It takes single argument as a pointer to the regs dump
>> >> buffer and populates it with current registers values, as
>> >> expected by the perf built-in unwinding test.
>> >>
>> >> Signed-off-by: Jean Pihet <jean.pihet@linaro.org>
>> >> Cc: Steve Capper <steve.capper@linaro.org>
>> >> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
>> >> Cc: Frederic Weisbecker <fweisbec@gmail.com>
>> >> Cc: Ingo Molnar <mingo@kernel.org>
>> >> Cc: Namhyung Kim <namhyung@kernel.org>
>> >> Cc: Paul Mackerras <paulus@samba.org>
>> >> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
>> >> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
>> >> Cc: David Ahern <dsahern@gmail.com>
>> >> Cc: Jiri Olsa <jolsa@redhat.com>
>> >> ---
>> >> tools/perf/arch/arm64/Makefile | 1 +
>> >> tools/perf/arch/arm64/include/perf_regs.h | 2 ++
>> >> tools/perf/arch/arm64/tests/regs_load.S | 39 +++++++++++++++++++++++++++++++
>> >> 3 files changed, 42 insertions(+)
>> >> create mode 100644 tools/perf/arch/arm64/tests/regs_load.S
>> >>
>> >> diff --git a/tools/perf/arch/arm64/Makefile b/tools/perf/arch/arm64/Makefile
>> >> index 67e9b3d..9b8f87e 100644
>> >> --- a/tools/perf/arch/arm64/Makefile
>> >> +++ b/tools/perf/arch/arm64/Makefile
>> >> @@ -4,4 +4,5 @@ LIB_OBJS += $(OUTPUT)arch/$(ARCH)/util/dwarf-regs.o
>> >> endif
>> >> ifndef NO_LIBUNWIND
>> >> LIB_OBJS += $(OUTPUT)arch/$(ARCH)/util/unwind-libunwind.o
>> >> +LIB_OBJS += $(OUTPUT)arch/$(ARCH)/tests/regs_load.o
>> >> endif
>> >> diff --git a/tools/perf/arch/arm64/include/perf_regs.h b/tools/perf/arch/arm64/include/perf_regs.h
>> >> index 2359546..1e052f1 100644
>> >> --- a/tools/perf/arch/arm64/include/perf_regs.h
>> >> +++ b/tools/perf/arch/arm64/include/perf_regs.h
>> >> @@ -9,6 +9,8 @@
>> >> #define PERF_REG_IP PERF_REG_ARM64_PC
>> >> #define PERF_REG_SP PERF_REG_ARM64_SP
>> >>
>> >> +void perf_regs_load(u64 *regs);
>> >> +
>> >> static inline const char *perf_reg_name(int id)
>> >> {
>> >> switch (id) {
>> >> diff --git a/tools/perf/arch/arm64/tests/regs_load.S b/tools/perf/arch/arm64/tests/regs_load.S
>> >> new file mode 100644
>> >> index 0000000..92ab968
>> >> --- /dev/null
>> >> +++ b/tools/perf/arch/arm64/tests/regs_load.S
>> >> @@ -0,0 +1,39 @@
>> >> +#include <linux/linkage.h>
>> >> +
>> >> +/*
>> >> + * Implementation of void perf_regs_load(u64 *regs);
>> >> + *
>> >> + * This functions fills in the 'regs' buffer from the actual registers values,
>> >> + * in the way the perf built-in unwinding test expects them:
>> >> + * - the PC at the time at the call to this function. Since this function
>> >> + * is called using a bl instruction, the PC value is taken from LR,
>> >
>> > Is it guaranteed that this function is always invoked with a branch with
>> > link instruction, or is that just what current compiler versions are
>> > doing? I couldn't see where we would get that guarantee from.
>> The current compiler implements the call as a bl instruction.
>
> While I don't think we can rely on the compiler using a bl to call the
> function it shouldn't matter here if we only care about the LR value
> being an address within the caller, as it doesn't look amenable to tail
> call optimization.
>
>> > If it is called with a branch with link, then the LR value will be the
>> > PC at call time + 4, rather than just the exact PC at call time. If not
>> > then we don't have a guaranteed relationship between the PC at call time
>> > and the current LR value.
>> >
>> > If the only place that perf_regs_load is used is a single test which
>> > doesn't care about the precise PC at the time of the call, then it's
>> > probably OK to use the LR value, but we should be careful to document
>> > what the faked-up PC actually is and how we expect it to be used.
>> The code is only used by an unwinding test. The unwinding code
>> resolves the function name from an address range found in the dwarf
>> information so in principle it is ok to use the PC/LR at the time of
>> the call to a function.
>>
>> Is the comment above OK or do you want an update of the code as well?
>
> If we just need an (arbitrary) address within the caller, a comment
> update should be fine.
Yes that is the idea;

>
>> >> + * - the current SP (not touched by this function),
>> >> + * - the current value of LR is merely retrieved and stored because the
>> >> + * value before the call to this function is unknown at this time; it will
>> >> + * be unwound from the dwarf information in unwind__get_entries.
>> >> + */
>> >> +
>> >> +.text
>> >> +.type perf_regs_load,%function
>> >> +ENTRY(perf_regs_load)
>> >> + stp x0, x1, [x0], #16 // store x0..x29
>> >> + stp x2, x3, [x0], #16
>> >> + stp x4, x5, [x0], #16
>> >> + stp x6, x7, [x0], #16
>> >> + stp x8, x9, [x0], #16
>> >> + stp x10, x11, [x0], #16
>> >> + stp x12, x13, [x0], #16
>> >> + stp x14, x15, [x0], #16
>> >> + stp x16, x17, [x0], #16
>> >> + stp x18, x19, [x0], #16
>> >> + stp x20, x21, [x0], #16
>> >> + stp x22, x23, [x0], #16
>> >> + stp x24, x25, [x0], #16
>> >> + stp x26, x27, [x0], #16
>> >> + stp x28, x29, [x0], #16
>> >> + mov x1, sp
>> >> + stp x30, x1, [x0], #16 // store lr and sp
>> >> + str x30, [x0] // store pc as lr in order to skip the call
>> >> + // to this function
>> >
>> > It might be better to word this a "store the lr in place of the pc". To
>> > me at least the current wording implies the opposite of what the code
>> > seems to be doing.
>> Ok the last comment can be updated.
>
> Ok, cheers.
>
> With those changes I think this looks fine.
Ok let me send a refreshed version in a bit. If the wording is Ok I
will refresh the ARM patches for the same topic and re-submit them.

>
> Thanks,
> Mark.

Thanks,
Jean

> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/


\
 
 \ /
  Last update: 2014-04-28 15:41    [W:0.136 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site