lkml.org 
[lkml]   [2014]   [Feb]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 12/14] HID: hidraw: replace hid_output_raw_report() calls by appropriates ones
From
On Wed, Feb 12, 2014 at 5:49 AM, David Herrmann <dh.herrmann@gmail.com> wrote:
> Hi
>
> On Mon, Feb 10, 2014 at 6:58 PM, Benjamin Tissoires
> <benjamin.tissoires@redhat.com> wrote:
>> Remove hid_output_raw_report() call as it is not a ll_driver callbacj,
>> and switch to the hid_hw_* implementation. USB-HID used to fallback
>> into SET_REPORT when there were no output interrupt endpoint,
>> so emulating this if hid_hw_output_report() returns -ENOSYS.
>>
>> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
>> ---
>> drivers/hid/hidraw.c | 22 +++++++++++++++++-----
>> 1 file changed, 17 insertions(+), 5 deletions(-)
>>
>> diff --git a/drivers/hid/hidraw.c b/drivers/hid/hidraw.c
>> index f8708c9..704718b 100644
>> --- a/drivers/hid/hidraw.c
>> +++ b/drivers/hid/hidraw.c
>> @@ -123,10 +123,8 @@ static ssize_t hidraw_send_report(struct file *file, const char __user *buffer,
>>
>> dev = hidraw_table[minor]->hid;
>>
>> - if (!dev->hid_output_raw_report) {
>> - ret = -ENODEV;
>> - goto out;
>> - }
>> + if (!dev->ll_driver->raw_request || !dev->ll_driver->output_report)
>> + return -ENODEV;
>
> You still have a "goto out;" above (not visible in the patch). The
> error paths look quite ugly now. I'd prefer consistency here, so
> either keep the jump or fix the error-path above, too. Otherwise looks
> good.

ok, will use "goto out" in the v2 then.

Cheers,
Benjamin

>
> Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
>
> Thanks
> David
>
>>
>> if (count > HID_MAX_BUFFER_SIZE) {
>> hid_warn(dev, "pid %d passed too large report\n",
>> @@ -153,7 +151,21 @@ static ssize_t hidraw_send_report(struct file *file, const char __user *buffer,
>> goto out_free;
>> }
>>
>> - ret = hid_output_raw_report(dev, buf, count, report_type);
>> + if (report_type == HID_OUTPUT_REPORT) {
>> + ret = hid_hw_output_report(dev, buf, count);
>> + /*
>> + * compatibility with old implementation of USB-HID and I2C-HID:
>> + * if the device does not support receiving output reports,
>> + * on an interrupt endpoint, then fallback to the SET_REPORT
>> + * HID command.
>> + */
>> + if (ret != -ENOSYS)
>> + goto out_free;
>> + }
>> +
>> + ret = hid_hw_raw_request(dev, buf[0], buf, count, report_type,
>> + HID_REQ_SET_REPORT);
>> +
>> out_free:
>> kfree(buf);
>> out:
>> --
>> 1.8.3.1
>>


\
 
 \ /
  Last update: 2014-02-13 17:01    [W:2.756 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site