lkml.org 
[lkml]   [2014]   [Feb]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/2] ASoC: fsl-spdif: big-endian support
Date
For most platforms, the CPU and SPDIF device is in the same endianess
mode. While for the LS1 platform, the CPU is in LE mode and the SPDIF
is in BE mode.

Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
Cc: Nicolin Chen <Guangyu.Chen@freescale.com>
---
Documentation/devicetree/bindings/sound/fsl,spdif.txt | 4 ++++
sound/soc/fsl/fsl_spdif.c | 8 +++++++-
2 files changed, 11 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/sound/fsl,spdif.txt b/Documentation/devicetree/bindings/sound/fsl,spdif.txt
index f2ae335..433ad00 100644
--- a/Documentation/devicetree/bindings/sound/fsl,spdif.txt
+++ b/Documentation/devicetree/bindings/sound/fsl,spdif.txt
@@ -29,6 +29,10 @@ Required properties:
can also be referred to TxClk_Source
bit of register SPDIF_STC.

+ - big-endian : If this property is absent, the native endian mode will
+ be in use as default, or the big endian mode will be in use for all the
+ device registers.
+
Example:

spdif: spdif@02004000 {
diff --git a/sound/soc/fsl/fsl_spdif.c b/sound/soc/fsl/fsl_spdif.c
index 8f36f49..2f8ad75 100644
--- a/sound/soc/fsl/fsl_spdif.c
+++ b/sound/soc/fsl/fsl_spdif.c
@@ -83,6 +83,8 @@ struct fsl_spdif_priv {
struct snd_dmaengine_dai_dma_data dma_params_tx;
struct snd_dmaengine_dai_dma_data dma_params_rx;

+ bool big_endian;
+
/* The name space will be allocated dynamically */
char name[0];
};
@@ -985,7 +987,7 @@ static bool fsl_spdif_writeable_reg(struct device *dev, unsigned int reg)
}
}

-static const struct regmap_config fsl_spdif_regmap_config = {
+static struct regmap_config fsl_spdif_regmap_config = {
.reg_bits = 32,
.reg_stride = 4,
.val_bits = 32,
@@ -1105,6 +1107,10 @@ static int fsl_spdif_probe(struct platform_device *pdev)
memcpy(&spdif_priv->cpu_dai_drv, &fsl_spdif_dai, sizeof(fsl_spdif_dai));
spdif_priv->cpu_dai_drv.name = spdif_priv->name;

+ spdif_priv->big_endian = of_property_read_bool(np, "big-endian");
+ if (spdif_priv->big_endian)
+ fsl_spdif_regmap_config.val_format_endian = REGMAP_ENDIAN_BIG;
+
/* Get the addresses and IRQ */
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
regs = devm_ioremap_resource(&pdev->dev, res);
--
1.8.4



\
 
 \ /
  Last update: 2014-02-11 08:21    [W:0.062 / U:1.096 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site