lkml.org 
[lkml]   [2014]   [Dec]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/2] add the dvs support for rk808
Date
rk808 has a dvs function, there are 3 pins for dvs, dvs1 & dvs2 & dvsok.
Normally, the voltage of DCDC1/DCDC2 are controlled by BUCKn_ON_VSEL, when
we pull dvs1/dvs2 pin to active, they would be controlled by BUCKn_DVS_VSEL.
And the dvsok pin is used to indicate whether regulating has been completed.
When dvs1/dvs2 pin change, dvsok would be pull down, and it would be pull up
once the regulating is complete.


Chris Zhong (2):
regulator: rk808: add dvs support
mfd: dt-bindings: add the description about dvs gpio for rk808

Documentation/devicetree/bindings/mfd/rk808.txt | 10 +-
drivers/regulator/rk808-regulator.c | 192 ++++++++++++++++++++++--
2 files changed, 189 insertions(+), 13 deletions(-)

--
1.9.1



\
 
 \ /
  Last update: 2014-12-09 15:21    [W:0.426 / U:0.196 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site