lkml.org 
[lkml]   [2014]   [Dec]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] dmaengine: mxs-dma: Declare slave capabilities for the generic code
Date
From: Fabio Estevam <fabio.estevam@freescale.com>

Since ecc19d17868be9c ("dmaengine: Add a warning for drivers not using the
generic slave caps retrieval") the following warning is observed:

[ 0.113023] ------------[ cut here ]------------
[ 0.113053] WARNING: CPU: 0 PID: 1 at drivers/dma/dmaengine.c:830 dma_async_device_register+0x2a0/0x4c8()
[ 0.113063] this driver doesn't support generic slave capabilities reporting

Declare the slave capabilities to avoid such warning.

Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---
drivers/dma/mxs-dma.c | 4 ++++
1 file changed, 4 insertions(+)

diff --git a/drivers/dma/mxs-dma.c b/drivers/dma/mxs-dma.c
index 599ffb5..829ec68 100644
--- a/drivers/dma/mxs-dma.c
+++ b/drivers/dma/mxs-dma.c
@@ -848,6 +848,10 @@ static int __init mxs_dma_probe(struct platform_device *pdev)
mxs_dma->dma_device.device_pause = mxs_dma_pause_chan;
mxs_dma->dma_device.device_resume = mxs_dma_resume_chan;
mxs_dma->dma_device.device_terminate_all = mxs_dma_terminate_all;
+ mxs_dma->dma_device.src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_4_BYTES);
+ mxs_dma->dma_device.dst_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_4_BYTES);
+ mxs_dma->dma_device.directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV);
+ mxs_dma->dma_device.residue_granularity = DMA_RESIDUE_GRANULARITY_BURST;
mxs_dma->dma_device.device_issue_pending = mxs_dma_enable_chan;

ret = dma_async_device_register(&mxs_dma->dma_device);
--
1.9.1


\
 
 \ /
  Last update: 2014-12-29 18:41    [W:0.034 / U:1.412 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site