lkml.org 
[lkml]   [2014]   [Dec]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] media: platform: add VPFE capture driver support for AM437X
On 12/01/2014 11:17 PM, Prabhakar Lad wrote:
> Hi Hans,
>
> Thanks for the review.
>
> On Mon, Dec 1, 2014 at 10:11 AM, Hans Verkuil <hverkuil@xs4all.nl> wrote:
>> Hi all,
>>
>> Thanks for the patch, review comments are below.
>>
>> For the next version I would appreciate if someone can test this driver with
>> the latest v4l2-compliance from the v4l-utils git repo. If possible test streaming
>> as well (v4l2-compliance -s), ideally with both a sensor and a STD receiver input.
>> But that depends on the available hardware of course.
>>
>> I'd like to see the v4l2-compliance output. It's always good to have that on
>> record.
>>
> Following is the compliance output, missed it post it along with patch:
>
> root@am437x-evm:~# ./v4l2-compliance -s -i 0 -v
> Driver Info:
> Driver name : vpfe
> Card type :[ 70.363908] vpfe 48326000.vpfe:
> ================= START STATUS =================
> TI AM437x VPFE
> Bus info : platform:vpfe [ 70.375576] vpfe
> 48326000.vpfe: ================== END STATUS ==================
> 48326000.vpfe
> Driver version: 3.18.0
> Capabil[ 70.388485] vpfe 48326000.vpfe: invalid input index: 1
> ities : 0x85200001
> Video Capture
> Read/Write
> Streaming
> Extended Pix Format
> Device Capabilities
> Device Caps : 0x05200001
> Video Capture
> Read/Write
> Streaming
> Extended Pix Format
>
> Compliance test for device /dev/video0 (not using libv4l2):
>
> Required ioctls:
> test VIDIOC_QUERYCAP: OK
>
> Allow for multiple opens:
> test second video open: OK
> test VIDIOC_QUERYCAP: OK
> test VIDIOC_G/S_PRIORITY: OK
>
> Debug ioctls:
> test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
> test VIDIOC_LOG_STATUS: OK
>
> Input ioctls:
> test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> test VIDIOC_ENUMAUDIO: OK (Not Supported)
> test VIDIOC_G/S/ENUMINPUT: OK
> test VIDIOC_G/S_AUDIO: OK (Not Supported)
> Inputs: 1 Audio Inputs: 0 Tuners: 0
>
> Output ioctls:
> test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> Outputs: 0 Audio Outputs: 0 Modulators: 0
>
> Input/Output configuration ioctls:
> test VIDIOC_ENUM/G/S/QUERY_STD: OK
> test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
> test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
> test VIDIOC_G/S_EDID: OK (Not Supported)
>
> Test input 0:
>
> Control ioctls:
> test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK (Not Supported)
> test VIDIOC_QUERYCTRL: OK (Not Supported)
> test VIDIOC_G/S_CTRL: OK (Not Supported)
> test VIDIOC_G/S/TRY_EXT_CTRLS: OK (Not Supported)
> test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported)
> test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> Standard Controls: 0 Private Controls: 0
>
> Format ioctls:
> info: found 7 framesizes for pixel format 56595559
> info: found 7 framesizes for pixel format 59565955
> info: found 7 framesizes for pixel format 52424752
> info: found 7 framesizes for pixel format 31384142
> info: found 4 formats for buftype 1
> test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
> test VIDIOC_G/S_PARM: OK
> test VIDIOC_G_FBUF: OK (Not Supported)
> test VIDIOC_G_FMT: OK
> test VIDIOC_TRY_FMT: OK
> info: Global format check succeeded for type 1
> test VIDIOC_S_FMT: OK
> test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
>
> Codec ioctls:
> test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
>
> Buffer ioctls:
> info: test buftype Video Capture
> test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
> test VIDIOC_EXPBUF: OK
>
> Streaming ioctls:
> test read/write: OK
> Video Capture:
> Buffer: 0 Sequence: 0 Field: None Timestamp: 74.956437s
> Buffer: 1 Sequence: 0 Field: None Timestamp: 74.979310s
> Buffer: 2 Sequence: 0 Field: None Timestamp: 75.002191s
> Buffer: 3 Sequence: 0 Field: None Timestamp: 75.208114s
> Buffer: 0 Sequence: 0 Field: None Timestamp: 75.230998s

Hmm, sequence is always 0. Is the sequence field set? And why doesn't
v4l2-compliance fail on this?

> Buffer: 1 Sequence: 0 Field: None Timestamp: 75.253877s

<snip>

> test MMAP: OK
> test USERPTR: OK (Not Supported)
> test DMABUF: Cannot test, specify --expbuf-device
>
> Total: 42, Succeeded: 42, Failed: 0, Warnings: 0
>>
> [Snip]

>>> +static int vpfe_enum_fmt(struct file *file, void *priv,
>>> + struct v4l2_fmtdesc *f)
>>> +{
>>> + struct vpfe_device *vpfe = video_drvdata(file);
>>> + struct v4l2_subdev_mbus_code_enum mbus_code;
>>> + struct vpfe_subdev_info *sdinfo;
>>> + struct vpfe_fmt *fmt;
>>> + int ret;
>>> +
>>> + vpfe_dbg(2, vpfe, "vpfe_enum_format index:%d\n",
>>> + f->index);
>>> +
>>> + sdinfo = vpfe->current_subdev;
>>> + if (!sdinfo->sd)
>>> + return -EINVAL;
>>> +
>>> + mbus_code.index = f->index;
>>> + ret = v4l2_subdev_call(sdinfo->sd, pad, enum_mbus_code,
>>> + NULL, &mbus_code);
>>> + if (ret)
>>> + return -EINVAL;
>>> +
>>> + /* convert mbus_format to v4l2_format */
>>> + fmt = find_format_by_code(mbus_code.code);
>>> + if (!fmt) {
>>> + vpfe_err(vpfe, "mbus code 0x%08x not found\n",
>>> + mbus_code.code);
>>> + return -EINVAL;
>>> + }
>>
>> Hmm. If a subdev supports more media bus codes then are supported by this
>> driver, then the enumeration will stop as soon as such an unsupported code
>> is found.
>>
>> What you want to do here is enumerate over the pixelformats that are supported
>> by both this driver and the subdev. It is probably something you want to
>> determine at the time the subdev is loaded and just mark unsupported formats
>> at that time so that they can be skipped here.
>>
> So probably populate the supported pixelformats in s_input call ,
> by calling enm_mbus_code ?

I would do this during driver initialization, it's a one time thing that can
be done there.

Regards,

Hans


\
 
 \ /
  Last update: 2014-12-02 09:01    [W:0.174 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site