lkml.org 
[lkml]   [2014]   [Dec]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 0/3] power: reset: vf610 system reset controller
Date
This second version does essentially the same as v1, but with a lot
less code due to the usage of syscon and syscon-reboot driver. My
earlier misgivings that it might be a problem for the suspend/resume
implementation later on did not hold true: I tested my prelinear
suspend code and in case the code really needs to access some
registers form assembler, it is possible to map temporarly the
relevant region again.

I refrained from adding POWER_RESET_SYSCON as a hard dependency for
Vybrid (SOC_VF610): In its dual-core configuration, one might want
have the Cortex-M4 in charge of the system reset... Hence the user
should be able to build a kernel without the system reset (beside
the option to create a board specific device tree with disabled
SRC node).

Shawn, the defconfig change is based on the latest (almost-merged?)
defconfig patch.

Changes since v1:
- Total rework using syscon/syscon-reboot capabilities
- Enhance syscon-reboot with priority capabilities (as suggested by Guenter)

Stefan Agner (3):
power: reset: read priority from device tree
ARM: dts: vf610: add system reset controller and syscon-reboot
ARM: imx_v6_v7_defconfig: add POWER_RESET_SYSCON

.../devicetree/bindings/power/reset/syscon-reboot.txt | 3 +++
arch/arm/boot/dts/vf500.dtsi | 4 ++++
arch/arm/boot/dts/vfxxx.dtsi | 13 +++++++++++++
arch/arm/configs/imx_v6_v7_defconfig | 8 ++++----
drivers/power/reset/syscon-reboot.c | 5 ++++-
5 files changed, 28 insertions(+), 5 deletions(-)

--
2.1.3



\
 
 \ /
  Last update: 2014-12-01 18:41    [W:0.230 / U:1.340 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site