lkml.org 
[lkml]   [2014]   [Nov]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] regulator: core: Add PRE_DISABLE notification
Date
Add a PRE_DISABLE notification so that consumers can use a
notifier to run any steps required to prepare for the
regulator being switched off. Since the regulator disable
can fail an abort notification is also added.

Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
---
drivers/regulator/core.c | 16 ++++++++++++++++
include/linux/regulator/consumer.h | 4 ++++
2 files changed, 20 insertions(+), 0 deletions(-)

diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index bbf93c9..8f48df4 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -1976,9 +1976,18 @@ static int _regulator_disable(struct regulator_dev *rdev)

/* we are last user */
if (_regulator_can_change_status(rdev)) {
+ ret = _notifier_call_chain(rdev,
+ REGULATOR_EVENT_PRE_DISABLE,
+ NULL);
+ if (ret & NOTIFY_STOP_MASK)
+ return -EINVAL;
+
ret = _regulator_do_disable(rdev);
if (ret < 0) {
rdev_err(rdev, "failed to disable\n");
+ _notifier_call_chain(rdev,
+ REGULATOR_EVENT_ABORT_DISABLE,
+ NULL);
return ret;
}
_notifier_call_chain(rdev, REGULATOR_EVENT_DISABLE,
@@ -2035,9 +2044,16 @@ static int _regulator_force_disable(struct regulator_dev *rdev)
{
int ret = 0;

+ ret = _notifier_call_chain(rdev, REGULATOR_EVENT_FORCE_DISABLE |
+ REGULATOR_EVENT_PRE_DISABLE, NULL);
+ if (ret & NOTIFY_STOP_MASK)
+ return -EINVAL;
+
ret = _regulator_do_disable(rdev);
if (ret < 0) {
rdev_err(rdev, "failed to force disable\n");
+ _notifier_call_chain(rdev, REGULATOR_EVENT_FORCE_DISABLE |
+ REGULATOR_EVENT_ABORT_DISABLE, NULL);
return ret;
}

diff --git a/include/linux/regulator/consumer.h b/include/linux/regulator/consumer.h
index 3c4fad5..d17e1ff 100644
--- a/include/linux/regulator/consumer.h
+++ b/include/linux/regulator/consumer.h
@@ -101,6 +101,8 @@ struct regmap;
* Data passed is "struct pre_voltage_change_data"
* ABORT_VOLTAGE_CHANGE Regulator voltage change failed for some reason.
* Data passed is old voltage cast to (void *).
+ * PRE_DISABLE Regulator is about to be disabled
+ * ABORT_DISABLE Regulator disable failed for some reason
*
* NOTE: These events can be OR'ed together when passed into handler.
*/
@@ -115,6 +117,8 @@ struct regmap;
#define REGULATOR_EVENT_DISABLE 0x80
#define REGULATOR_EVENT_PRE_VOLTAGE_CHANGE 0x100
#define REGULATOR_EVENT_ABORT_VOLTAGE_CHANGE 0x200
+#define REGULATOR_EVENT_PRE_DISABLE 0x400
+#define REGULATOR_EVENT_ABORT_DISABLE 0x800

/**
* struct pre_voltage_change_data - Data sent with PRE_VOLTAGE_CHANGE event
--
1.7.2.5


\
 
 \ /
  Last update: 2014-11-24 15:41    [W:0.044 / U:0.436 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site