lkml.org 
[lkml]   [2014]   [Nov]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
Subject[PATCH v2] ath3k: Add support of MCI 13d3:3408 bt device
From
Add support for bluetooth MCI WB335 (AR9565) Wi-Fi+bt module.
It is AR3011 device according to iProduct == 0.
So btusb should be blacklisted
I submitted a wrong patch before asif it was an AR3012 device,
but it works both ways. This is the right one.

Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com>
are */

---

diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
index d85ced2..3b53116 100644
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -69,6 +69,7 @@ static const struct usb_device_id ath3k_table[] = {
{ USB_DEVICE(0x0CF3, 0x3002) },
{ USB_DEVICE(0x0CF3, 0xE019) },
{ USB_DEVICE(0x13d3, 0x3304) },
+ { USB_DEVICE(0x13d3, 0x3408) },

/* Atheros AR9285 Malbec with sflash firmware */
{ USB_DEVICE(0x03F0, 0x311D) },
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index edfc17b..bbf5c1c 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -146,6 +146,7 @@ static const struct usb_device_id blacklist_table[] = {
{ USB_DEVICE(0x0cf3, 0x3002), .driver_info = BTUSB_IGNORE },
{ USB_DEVICE(0x0cf3, 0xe019), .driver_info = BTUSB_IGNORE },
{ USB_DEVICE(0x13d3, 0x3304), .driver_info = BTUSB_IGNORE },
+ { USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_IGNORE },

/* Atheros AR9285 Malbec with sflash firmware */
{ USB_DEVICE(0x03f0, 0x311d), .driver_info = BTUSB_IGNORE },

\
 
 \ /
  Last update: 2014-11-19 00:01    [W:0.063 / U:0.532 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site