lkml.org 
[lkml]   [2014]   [Nov]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] ARM: dts: vf-colibri: add USB regulators
Date
Add structure of USB supply logic. The USB hosts power enable
regulator is needed to control VBUS supply on the Colibri carrier
board.

Signed-off-by: Stefan Agner <stefan@agner.ch>
---
This is the second version of a leftover of the "ARM: dts: vf610:
USB/GPIO fixes" patchset. The rest is already applied.

Changes in v2:
- Assign pinctrl to usbh_vbus_reg explicitly
- Remove USB client/host VBUS supply (not yet implemented in
driver)

arch/arm/boot/dts/vf-colibri-eval-v3.dtsi | 34 ++++++++++++++++++++++++++++++-
arch/arm/boot/dts/vf-colibri.dtsi | 6 ++++++
2 files changed, 39 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
index 80e8fbc..2d3e966 100644
--- a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
+++ b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
@@ -11,6 +11,34 @@
chosen {
bootargs = "console=ttyLP0,115200";
};
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sys_5v0_reg: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "5v0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ /* USBH_PEN */
+ usbh_vbus_reg: regulator@1 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbh1_reg>;
+ reg = <1>;
+ regulator-name = "usbh_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio3 19 GPIO_ACTIVE_LOW>;
+ vin-supply = <&sys_5v0_reg>;
+ };
+ };
};

&bl {
@@ -51,4 +79,8 @@

&uart2 {
status = "okay";
-};
\ No newline at end of file
+};
+
+&usbh1 {
+ vbus-supply = <&usbh_vbus_reg>;
+};
diff --git a/arch/arm/boot/dts/vf-colibri.dtsi b/arch/arm/boot/dts/vf-colibri.dtsi
index 2371760..27bcf5f 100644
--- a/arch/arm/boot/dts/vf-colibri.dtsi
+++ b/arch/arm/boot/dts/vf-colibri.dtsi
@@ -163,5 +163,11 @@
VF610_PAD_PTD3__UART2_CTS 0x21a1
>;
};
+
+ pinctrl_usbh1_reg: gpio_usb_vbus {
+ fsl,pins = <
+ VF610_PAD_PTD4__GPIO_83 0x22ed
+ >;
+ };
};
};
--
2.1.3


\
 
 \ /
  Last update: 2014-11-16 19:41    [W:0.029 / U:0.492 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site