Messages in this thread | | | Date | Fri, 14 Nov 2014 15:08:32 -0600 | From | Felipe Balbi <> | Subject | Re: [PATCH v7 08/13] usb: chipidea: add a usb2 driver for ci13xxx |
| |
On Fri, Nov 14, 2014 at 04:25:58PM +0100, Antoine Tenart wrote: > Add a USB2 ChipIdea driver for ci13xxx, with optional PHY, clock > and DMA mask, to support USB2 ChipIdea controllers that don't need > specific functions. > > Tested on the Marvell Berlin SoCs USB controllers. > > Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> > --- > drivers/usb/chipidea/Makefile | 1 + > drivers/usb/chipidea/ci_hdrc_usb2.c | 117 ++++++++++++++++++++++++++++++++++++ > 2 files changed, 118 insertions(+) > create mode 100644 drivers/usb/chipidea/ci_hdrc_usb2.c > > diff --git a/drivers/usb/chipidea/Makefile b/drivers/usb/chipidea/Makefile > index 2f099c7df7b5..1fc86a2ca22d 100644 > --- a/drivers/usb/chipidea/Makefile > +++ b/drivers/usb/chipidea/Makefile > @@ -10,6 +10,7 @@ ci_hdrc-$(CONFIG_USB_OTG_FSM) += otg_fsm.o > > # Glue/Bridge layers go here > > +obj-$(CONFIG_USB_CHIPIDEA) += ci_hdrc_usb2.o
usb2 is too generic, you should call it ci_hdcr_marvell, or something like that.
-- balbi [unhandled content-type:application/pgp-signature] | |