Messages in this thread Patch in this message | | | From | Antoine Tenart <> | Subject | [PATCH v7 06/13] Documentation: bindings: add doc for the Berlin USB PHY | Date | Fri, 14 Nov 2014 16:25:56 +0100 |
| |
Document the bindings of the Marvell Berlin USB PHY driver.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> --- Documentation/devicetree/bindings/phy/berlin-usb-phy.txt | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/berlin-usb-phy.txt
diff --git a/Documentation/devicetree/bindings/phy/berlin-usb-phy.txt b/Documentation/devicetree/bindings/phy/berlin-usb-phy.txt new file mode 100644 index 000000000000..be33780f668e --- /dev/null +++ b/Documentation/devicetree/bindings/phy/berlin-usb-phy.txt @@ -0,0 +1,16 @@ +* Marvell Berlin USB PHY + +Required properties: +- compatible: "marvell,berlin2-usb-phy" or "marvell,berlin2cd-usb-phy" +- reg: base address and length of the registers +- #phys-cells: should be 0 +- resets: reference to the reset controller + +Example: + + usb-phy@f774000 { + compatible = "marvell,berlin2-usb-phy"; + reg = <0xf774000 0x128>; + #phy-cells = <0>; + resets = <&chip 0x104 14>; + }; -- 2.1.0
| |