[lkml]   [2014]   [Nov]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v4 0/7] Add support for USB cluster(PHY muxer) on the Armada 375

this is the forth version of a series adding support for the USB
cluster which is on the Armada 375 SoC. We can mainly see this device
as a PHY muxer.

Since the last version I no more use a global variable and store it
now in the platform data as suggested by Kishon. I also add a new
patch adding myself as maintainer of this driver.

While I ran coccicheck on my code I also found some possible
improvement in the phy driver: it was done in the 1st patch.

The second patch was a patch initially submitted by Andrew. This patch
added the mvebu-phy.txt but fell through a crack when adding the
driver. I join this patch on my series in order to be able to add the
new binding for the USB cluster of the Armada 375.

This was done in the third patch.

The forth patch was the addition of the phys driver itself.

The fifth and sixth patches are updating the device tree files related
to the Armada 375 using the new biding.

The seventh patch add myself as maintainer of this driver.



v3 -> v4:

- No more use a global variable to store the data related to the usb
cluster and put them in the platform data instead.

- Add more check on the NULL pointer in the driver to make it more

- Add a new patch to dd myself as maintainer of this driver.

v2 -> v3:

- Added Kishon acked-by on the 5th patch.

- Used include/dt-bindings/phy/phy.h instead of creating a new one in
the forth patch.

v1 -> v2:

- Add a patch fixing the use of PTR_ERR_OR_ZERO.

- Add the patch adding the DT binding documentation for Marvell MVEBU
SATA phy from Andrew Lunn

- Move the DT binding documentation of the Armada 375 USB cluster into
the phy-mvebu.txt file.

- Made the armada375_usb_phy_xlate more robust" if there is a phy_put
and then a phy_get".

Andrew Lunn (1):
Phy: DT binding documentation for Marvell MVEBU SATA phy.

Gregory CLEMENT (6):
phy: Use PTR_ERR_OR_ZERO to fix warning raised by coccinelle
Phy: DT binding documentation for the Armada 375 USB cluster binding
phy: add support for USB cluster on the Armada 375 SoC
ARM: mvebu: add Device Tree description of USB cluster controller on
Armada 375
ARM: mvebu: add PHY support to the dts for the USB controllers on
Armada 375
MAINTAINERS: add entry for the Armada 375 USB cluster PHY driver

Documentation/devicetree/bindings/ata/marvell.txt | 6 +
.../devicetree/bindings/phy/phy-mvebu.txt | 43 ++++++
arch/arm/boot/dts/armada-375.dtsi | 11 ++
drivers/phy/Kconfig | 6 +
drivers/phy/Makefile | 1 +
drivers/phy/phy-armada375-usb2.c | 158 +++++++++++++++++++++
drivers/phy/phy-berlin-sata.c | 5 +-
drivers/phy/phy-hix5hd2-sata.c | 5 +-
drivers/phy/phy-miphy365x.c | 5 +-
drivers/phy/phy-stih41x-usb.c | 5 +-
include/dt-bindings/phy/phy.h | 1 +
12 files changed, 236 insertions(+), 16 deletions(-)
create mode 100644 Documentation/devicetree/bindings/phy/phy-mvebu.txt
create mode 100644 drivers/phy/phy-armada375-usb2.c


 \ /
  Last update: 2014-11-13 13:21    [W:0.107 / U:0.924 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site