lkml.org 
[lkml]   [2014]   [Nov]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 4/5] ARM: dts: sun7i: Cubietruck: override regulator pin
Date
Cubietruck uses different pin for the USB OTG VBUS that
is why we override the one defined in sunxi-common-regulators.dtsi

Signed-off-by: Roman Byshko <rbyshko@gmail.com>
---
arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 13 +++++++++++++
1 file changed, 13 insertions(+)

diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
index a6c1a3c..1682307 100644
--- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
+++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
@@ -92,6 +92,13 @@
allwinner,drive = <0>;
allwinner,pull = <0>;
};
+
+ usb0_vbus_pin_a: usb0_vbus_pin@0 {
+ allwinner,pins = "PH17";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
};

pwm: pwm@01c20e00 {
@@ -185,6 +192,12 @@
status = "okay";
};

+ reg_usb0_vbus: usb0-vbus {
+ pinctrl-0 = <&usb0_vbus_pin_a>;
+ gpio = <&pio 7 17 0>;
+ status = "okay";
+ };
+
reg_usb1_vbus: usb1-vbus {
status = "okay";
};
--
2.1.2


\
 
 \ /
  Last update: 2014-11-10 20:21    [W:0.135 / U:0.716 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site