lkml.org 
[lkml]   [2013]   [Sep]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 5/5] ARM: shmobile: lager: (DEVEL) add CPUFreq support
Hi Sergei

On Thu, 26 Sep 2013, Sergei Shtylyov wrote:

> Hello.
>
> On 09/26/2013 09:21 PM, Guennadi Liakhovetski wrote:
>
> > The Lager board uses a DA9210 voltage regulator to supply DVFS power to the
> > CA15 cores on the r8a7790 SoC. This patch adds CPUFreq support for that
> > board using the cpufreq-cpu0 driver.
>
> > Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
> > ---
>
> > v2: added 'status = "okay";' to the i2c bus
>
> > arch/arm/boot/dts/r8a7790-lager-reference.dts | 33
> > ++++++++++++++++++++++++
> > arch/arm/mach-shmobile/board-lager-reference.c | 4 ++-
> > 2 files changed, 36 insertions(+), 1 deletions(-)
>
> > diff --git a/arch/arm/boot/dts/r8a7790-lager-reference.dts
> > b/arch/arm/boot/dts/r8a7790-lager-reference.dts
> > index c462ef1..1ce0a97 100644
> > --- a/arch/arm/boot/dts/r8a7790-lager-reference.dts
> > +++ b/arch/arm/boot/dts/r8a7790-lager-reference.dts
> > @@ -43,3 +43,36 @@
> > };
> > };
> > };
> > +
> > +&i2c3 {
> > + status = "okay";
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&i2c3_pins>;
> > +
> > + vdd_dvfs: da9210@68 {
>
> ePAPR spec [1] says: "The name of a node should be somewhat generic,
> reflecting the function of the device and not its precise programming model."

Sure, but I think it is common in Linux .dts files for I2C devices to use
"<model>@<i2c addr>" as a name.

> So I suggest "regulator" instead of "da9210".
>
> > + compatible = "diasemi,da9210";
> > + reg = <0x68>;
> > +
> > + regulator-min-microvolt = <900000>;
> > + regulator-max-microvolt = <1000000>;
> > + regulator-boot-on;
> > + regulator-always-on;
> > + };
> > +};
> [...]
> > diff --git a/arch/arm/mach-shmobile/board-lager-reference.c
> > b/arch/arm/mach-shmobile/board-lager-reference.c
> > index 1a1a4a8..2bc8bae 100644
> > --- a/arch/arm/mach-shmobile/board-lager-reference.c
> > +++ b/arch/arm/mach-shmobile/board-lager-reference.c
> [...]
> > @@ -29,7 +30,8 @@ static void __init lager_add_standard_devices(void)
> > r8a7790_clock_init();
> >
> > r8a7790_add_dt_devices();
> > - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
> > + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
>
> Hm, "drove-by" cleanup?

This should be avoided in general, but this kind of stuff really doesn't
deserve neither a separate patch nor a mention. Don't waste your precious
brain cycles.

> > + platform_device_register_simple("cpufreq-cpu0", -1, NULL, 0);
> > }
> >
> > static const char *lager_boards_compat_dt[] __initdata = {
>
> Shouldn't the patch be split into .dts and .c parts, I wonder?

Simon didn't complain, but perhaps it should, yes. I think I'll resubmit
this as 2 patches with no changes.

Thanks
Guennadi

> [1] http://www.power.org/resources/downloads/Power_ePAPR_APPROVED_v1.0.pdf
>
> WBR, Sergei

---
Guennadi Liakhovetski, Ph.D.
Freelance Open-Source Software Developer
http://www.open-technology.de/


\
 
 \ /
  Last update: 2013-09-27 11:01    [W:0.125 / U:0.164 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site