lkml.org 
[lkml]   [2013]   [Sep]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 5/5] ARM: shmobile: lager: (DEVEL) add CPUFreq support
Hi Laurent

On Fri, 27 Sep 2013, Laurent Pinchart wrote:

> Hi Guennadi,
>
> Thank you for the patch.
>
> On Thursday 26 September 2013 19:21:00 Guennadi Liakhovetski wrote:
> > The Lager board uses a DA9210 voltage regulator to supply DVFS power to the
> > CA15 cores on the r8a7790 SoC. This patch adds CPUFreq support for that
> > board using the cpufreq-cpu0 driver.
> >
> > Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
> > ---
> >
> > v2: added 'status = "okay";' to the i2c bus
> >
> > arch/arm/boot/dts/r8a7790-lager-reference.dts | 33 +++++++++++++++++++++
> > arch/arm/mach-shmobile/board-lager-reference.c | 4 ++-
> > 2 files changed, 36 insertions(+), 1 deletions(-)
> >
> > diff --git a/arch/arm/boot/dts/r8a7790-lager-reference.dts
> > b/arch/arm/boot/dts/r8a7790-lager-reference.dts index c462ef1..1ce0a97
> > 100644
> > --- a/arch/arm/boot/dts/r8a7790-lager-reference.dts
> > +++ b/arch/arm/boot/dts/r8a7790-lager-reference.dts
> > @@ -43,3 +43,36 @@
> > };
> > };
> > };
> > +
> > +&i2c3 {
> > + status = "okay";
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&i2c3_pins>;
> > +
> > + vdd_dvfs: da9210@68 {
> > + compatible = "diasemi,da9210";
> > + reg = <0x68>;
> > +
> > + regulator-min-microvolt = <900000>;
> > + regulator-max-microvolt = <1000000>;
> > + regulator-boot-on;
> > + regulator-always-on;
> > + };
> > +};
> > +
> > +&cpu0 {
> > + cpu0-supply = <&vdd_dvfs>;
> > + operating-points = <
> > + /* kHz uV - OPs unknown yet */
> > + 1300000 1000000
> > + 1000000 900000
> > + >;
> > + voltage-tolerance = <1>; /* 1% */
> > +};
> > +
> > +&pfc {
> > + i2c3_pins: i2c3 {
> > + renesas,groups = "i2c3";
> > + renesas,function = "i2c3";
> > + };
> > +};
> > diff --git a/arch/arm/mach-shmobile/board-lager-reference.c
> > b/arch/arm/mach-shmobile/board-lager-reference.c index 1a1a4a8..2bc8bae
> > 100644
> > --- a/arch/arm/mach-shmobile/board-lager-reference.c
> > +++ b/arch/arm/mach-shmobile/board-lager-reference.c
> > @@ -20,6 +20,7 @@
> >
> > #include <linux/init.h>
> > #include <linux/of_platform.h>
> > +#include <linux/platform_device.h>
> > #include <mach/r8a7790.h>
> > #include <asm/mach/arch.h>
> >
> > @@ -29,7 +30,8 @@ static void __init lager_add_standard_devices(void)
> > r8a7790_clock_init();
> >
> > r8a7790_add_dt_devices();
> > - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
> > + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
> > + platform_device_register_simple("cpufreq-cpu0", -1, NULL, 0);
>
> Out of curiosity, could you explain how this cpufreq-cpu0 platform device gets
> associated with the cpu0 DT node ?

I can try, yes.

> The cpufreq-cpu0 driver requires a DT node
> (its probe function returns -ENOENT if pdev->dev.of_node is NULL), and I don't
> see how the of_node gets set as the platform device is registered through
> board code. I might of course be missing something obvious :-)

I think you can just follow this threads:

http://thread.gmane.org/gmane.linux.kernel.cpufreq/11427/focus=1547510
http://thread.gmane.org/gmane.linux.kernel.cpufreq/12408

and there's also a comment in another my patch from yesterday from the
same thread:

http://marc.info/?l=linux-sh&m=138021613314913&w=2

So, in short, you seem to be looking at a buggy driver state, yes. A fix
is on its way.

Thanks
Guennadi

> > }
> >
> > static const char *lager_boards_compat_dt[] __initdata = {
> --
> Regards,
>
> Laurent Pinchart

---
Guennadi Liakhovetski, Ph.D.
Freelance Open-Source Software Developer
http://www.open-technology.de/


\
 
 \ /
  Last update: 2013-09-27 09:01    [W:0.105 / U:5.812 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site