lkml.org 
[lkml]   [2013]   [Sep]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v11 0/3] DMA: Freescale: Add support for 8-channel DMA engine
Date
From: Hongbo Zhang <hongbo.zhang@freescale.com>

Hi DMA and DT maintainers, please have a look at these V11 patches.

Freescale QorIQ T4 and B4 introduce new 8-channel DMA engines, this patch set
adds support this DMA engine.

V10->V11 changes:
- add "contains two entries" for reg description in patch [2/3]

V9->V10 changes:
- update binding description text, mainly about the reg property and also Elo3
DMA controller specification

V8->V9 changes:
- add "Acked-by: Mark Rutland <mark.rutland@arm.com>" into patch [1/3]
- update reg entry <0x100300 0x4 0x100600 0x4> to two seperate ones
<0x100300 0x4>, <0x100600 0x4> in patch [2/3]
- and also use "QorIQ Elo3 DMA" to mention previous "QorIQ DMA" in [2/3]

V7->V8 changes:
- change the word "mapping" to "specifier" for reg and interrupts description

V6->V7 changes:
- only remove unnecessary "CHIP-dma" explanations in [1/3]

V5->V6 changes:
- minor updates of descriptions in binding document and Kconfig
- remove [4/4], that should be another patch in future

V4->V5 changes:
- update description in the dt binding document, to make it more resonable
- add new patch [4/4] to eliminate a compiling warning which already exists
for a long time

V3->V4 changes:
- introduce new patch [1/3] to revise the legacy dma binding document
- and then add new paragraph to describe new dt node binding in [2/3]
- rebase to latest kernel v3.11-rc1

V2->V3 changes:
- edit Documentation/devicetree/bindings/powerpc/fsl/dma.txt
- edit text string in Kconfig and the driver files, using "elo series" to
mention all the current "elo*"

V1->V2 changes:
- removed the codes handling the register dgsr1, since it isn't used currently
- renamed the DMA DT compatible to "fsl,elo3-dma"
- renamed the new dts files to "elo3-dma-<n>.dtsi"

Hongbo Zhang (3):
DMA: Freescale: revise device tree binding document
DMA: Freescale: Add new 8-channel DMA engine device tree nodes
DMA: Freescale: update driver to support 8-channel DMA engine

.../devicetree/bindings/powerpc/fsl/dma.txt | 138 ++++++++++++++------
arch/powerpc/boot/dts/fsl/b4si-post.dtsi | 4 +-
arch/powerpc/boot/dts/fsl/elo3-dma-0.dtsi | 82 ++++++++++++
arch/powerpc/boot/dts/fsl/elo3-dma-1.dtsi | 82 ++++++++++++
arch/powerpc/boot/dts/fsl/t4240si-post.dtsi | 4 +-
drivers/dma/Kconfig | 9 +-
drivers/dma/fsldma.c | 9 +-
drivers/dma/fsldma.h | 2 +-
8 files changed, 281 insertions(+), 49 deletions(-)
create mode 100644 arch/powerpc/boot/dts/fsl/elo3-dma-0.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/elo3-dma-1.dtsi

--
1.7.9.5





\
 
 \ /
  Last update: 2013-09-26 12:01    [W:0.482 / U:0.148 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site